Intel Xeon Gold 5320 vs Intel Xeon Platinum 8280M Comparison

Intel
INTEL

Intel Xeon Gold 5320

CORE STATE Ice Lake-SP
CORE SPECS 26 Cores / 52 Threads
CLOCK SPEED 2.2 Base / 3.4 GHz Turbo
CACHE 39 MB (shared)
MAX TDP 185W
ARCHITECTURE Ice Lake
nm
PROCESS 10 nm
LAUNCH DATE 2021
VS
Intel
INTEL

Xeon Platinum 8280M

CORE STATE Cascade Lake-SP
CORE SPECS 28 Cores / 56 Threads
CLOCK SPEED 2.7 Base / 4 GHz Turbo
CACHE 38.5 MB (shared)
MAX TDP 205W
ARCHITECTURE Cascade Lake
nm
PROCESS 14 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
3,217
3,227
cinebench_cinebench_r15_singlecore
454
455
cinebench_cinebench_r20_multicore
13,408
13,446
cinebench_cinebench_r20_singlecore
1,892
1,897
cinebench_cinebench_r23_multicore
31,924
32,015
cinebench_cinebench_r23_singlecore
4,506
4,519

Analysis: Intel Xeon Gold 5320 vs Intel Xeon Platinum 8280M

The Intel Xeon Platinum 8280M and Intel Xeon Gold 5320 are two server-focused processors from different architectural generations, yet their benchmark results show an unusually tight contest. The Platinum 8280M, a Cascade Lake-SP part, edges out the Ice Lake-SP Gold 5320 in every single Cinebench test included in the data, but the margins are razor-thin across the board. The average benchmark scores tell the same story: the 8280M posts an average of 9260, while the 5320 sits just behind at 9234, a difference of 0.3 percent. Both chips occupy the 65th percentile among all CPUs, indicating they land in the same performance tier despite their generational gap.

Head-to-Head Benchmarks

The head-to-head results are a clean sweep for the Intel Xeon Platinum 8280M, which wins all six Cinebench comparisons. The largest victory comes in the multi-core tests, where the 8280M consistently leads by 0.3 percent. In Cinebench R15 multi-core, the 8280M scores 3227 against the 5320’s 3217. That 10-point gap repeats in Cinebench R20 multi-core, where 13446 beats 13408, and again in Cinebench R23 multi-core, with 32015 versus 31924. Across these three multi-core workloads, the delta remains a steady 0.3 percent, meaning the 8280M’s advantage is consistent but not transformative.

Single-core results follow the same pattern, with the 8280M winning by 0.2 to 0.3 percent. In Cinebench R15 single-core, the 8280M posts 455 against 454 for the 5320, a single-point margin. Cinebench R20 single-core shows 1897 versus 1892, a five-point gap that translates to 0.3 percent. Cinebench R23 single-core closes with 4519 against 4506, again a 0.3 percent lead. The fact that the 8280M wins every test—multi-core and single-core alike—suggests a slight overall performance edge, but the deltas are so small that real-world workloads would likely see negligible differences.

The nearest-rival data reinforces how close these two processors are. For the 8280M, the 5320 appears as a nearest rival with an average score of 9234 and a delta of 0.3 percent, meaning the 8280M is ahead by that margin. From the 5320’s perspective, the 8280M is also a nearest rival, with the 5320 trailing by -0.3 percent. Both chips also sit near the AMD Ryzen Threadripper 3960X, which averages 9284, and the Intel Core i5-10300H at 9243, placing all four within a 0.5 percent band. This is a remarkably tight cluster, and the benchmark data shows no clear knockout blow in either direction.

Architecture Differences

The architectural divide between these two Xeons is significant. The Intel Xeon Platinum 8280M is built on Cascade Lake-SP, using Intel’s 14 nm process node with 8,000 million transistors. It packs 28 cores and 56 threads, with a base clock of 2.70 GHz and a boost clock of 4.00 GHz. Its cache layout includes 64 KB of L1 per core, 1 MB of L2 per core, and 38.5 MB of shared L3. The chip uses the Intel Socket 3647 and supports DDR4 memory with ECC enabled. It also runs PCIe Gen 3, and its TDP is rated at 205 watts.

The Intel Xeon Gold 5320, by contrast, is an Ice Lake-SP part built on Intel’s 10 nm process. It has 26 cores and 52 threads, with a lower base clock of 2.20 GHz and a boost clock of 3.40 GHz. Its cache is similar in structure—64 KB of L1 per core and 1 MB of L2 per core—but the shared L3 is slightly larger at 39 MB. The 5320 moves to the Intel Socket 4189, supports DDR4 memory with ECC, and upgrades to PCIe Gen 4 with 64 lanes available from the CPU. It also carries an eight-channel memory bus with a rated bandwidth of 191.6 GB/s. The TDP is lower at 185 watts, and the production status is listed as active.

The process node difference is the headline architectural change: 14 nm for the 8280M versus 10 nm for the 5320. That newer node likely explains how the 5320 manages to stay competitive with two fewer cores and lower clock speeds, though the data does not specify a transistor count for the 5320. The 8280M counters with two additional cores, higher base and boost clocks, and a 20-watt higher TDP. The socket change from 3647 to 4189 means these chips are not drop-in compatible, and the PCIe generation jump from Gen 3 to Gen 4 gives the 5320 a platform-level advantage for storage and accelerator bandwidth.

FAQ

Q: Which processor has more cores and threads?

A: The Intel Xeon Platinum 8280M has 28 cores and 56 threads, while the Intel Xeon Gold 5320 has 26 cores and 52 threads. The 8280M leads by two cores and four threads.

Q: How do the base and boost clocks compare?

A: The 8280M runs at a base clock of 2.70 GHz and boosts to 4.00 GHz. The 5320 is lower on both counts, with a base of 2.20 GHz and a boost of 3.40 GHz.

Q: What is the cache difference between the two?

A: Both chips share the same L1 and L2 configuration—64 KB and 1 MB per core, respectively. The shared L3 differs slightly: the 8280M has 38.5 MB, while the 5320 has 39 MB, a 0.5 MB advantage for the 5320.

Q: Which processor wins in Cinebench R23 multi-core?

A: The 8280M wins with a score of 32015 against the 5320’s 31924, a margin of 0.3 percent. The 8280M also wins the single-core version of that test, 4519 versus 4506.

Q: Do these processors use the same socket?

A: No. The 8280M uses Intel Socket 3647, while the 5320 uses Intel Socket 4189. They are not interchangeable between platforms.

Q: What are the memory and PCIe differences?

A: Both support DDR4 with ECC, but the 5320 adds an eight-channel memory bus with 191.6 GB/s bandwidth. The 5320 also supports PCIe Gen 4 with 64 lanes from the CPU, whereas the 8280M is limited to PCIe Gen 3.

Specification Differences

The two processors differ in several key specification fields. The 8280M has 28 cores and 56 threads, versus 26 cores and 52 threads for the 5320. Base clocks are 2.70 GHz for the 8280M and 2.20 GHz for the 5320, while boost clocks are 4.00 GHz and 3.40 GHz, respectively. TDP differs by 20 watts: 205 watts for the 8280M and 185 watts for the 5320. The socket changes from Intel Socket 3647 on the 8280M to Intel Socket 4189 on the 5320. The process node steps down from 14 nm to 10 nm, and the 8280M lists 8,000 million transistors while the 5320 does not specify a count. L3 cache shifts slightly, from 38.5 MB shared on the 8280M to 39 MB shared on the 5320. The memory bus is not listed for the 8280M, but the 5320 specifies an eight-channel bus with 191.6 GB/s bandwidth. PCIe support upgrades from Gen 3 on the 8280M to Gen 4 with 64 lanes on the 5320. The release dates are also distinct: the 8280M launched on 2018-12-10, while the 5320 arrived on 2021-04-05. The 5320 is marked as active in production, while the 8280M has no production status listed.

The Verdict

The data presents a close call, but the Intel Xeon Platinum 8280M is the winner on raw benchmark performance. It takes all six head-to-head Cinebench comparisons, albeit by margins of just 0.2 to 0.3 percent. Its higher core count, 28 versus 26, and faster clocks, 2.70 GHz base and 4.00 GHz boost versus 2.20 GHz and 3.40 GHz, give it a measurable edge in both multi-core and single-core workloads. For users who prioritize maximum throughput in Cinebench-style rendering tasks, the 8280M is the better pick based strictly on the scores.

That said, the Intel Xeon Gold 5320 is not far behind, and it brings platform advantages that the benchmark data does not capture. The 5320 runs on a newer 10 nm process, supports PCIe Gen 4 with 64 lanes, and offers a larger 39 MB L3 cache. Its eight-channel memory bus with 191.6 GB/s bandwidth could benefit memory-intensive workloads, even if Cinebench does not show it. With a lower TDP of 185 watts and active production status, the 5320 may be the more forward-looking choice for new system builds, especially where PCIe Gen 4 connectivity matters. The 8280M, meanwhile, is a 2018-era part with no production status listed, and its performance lead is narrow enough that architectural advantages could tip the scales in real-world use cases not represented in the benchmarks.

DETAILED SPECIFICATIONS

SPECIFICATION
Gold 5320
Platinum 8280M
Core Specs
Cores
26
28 +7.7%
Threads
52
56 +7.7%
Base Clock (GHz)
2.2
2.7 +22.7%
Boost Clock (GHz)
3.4
4 +17.6%
Frequency (GHz)
2.2
2.7 +22.7%
Turbo Clock (GHz)
3.4
4 +17.6%
Multiplier
22
27 +22.7%
SMP CPUs
2
8 +300.0%
Cache
L1 Cache
64 KB (per core)
64 KB (per core)
L2 Cache
1 MB (per core)
1 MB (per core)
L3 Cache
39 MB (shared)
38.5 MB (shared)
Power
TDP (W)
185
205 +10.8%
Architecture
Architecture
Ice Lake
Cascade Lake
Codename
Ice Lake-SP
Cascade Lake-SP
Generation
Xeon Gold (Ice Lake-SP)
Xeon Platinum (Cascade Lake-SP)
Process Size
10 nm
14 nm
Transistors
—
8,000 million
Foundry
Intel
Intel
Memory
Memory Support
DDR4
DDR4
Memory Bus
Eight-channel
—
Memory Bandwidth
191.6 GB/s
—
ECC Memory
Yes
Yes
Platform
Socket
Intel Socket 4189
Intel Socket 3647
PCIe
Gen 4, 64 Lanes(CPU only)
Gen 3
Other
Market
Server/Workstation
Server/Workstation
Production Status
Active
—
Part Number
—
SRF9QCD8069504228101
Package
FC-LGA4189
FC-LGA3647
View Xeon Gold 5320 Details View Xeon Platinum 8280M Details