Intel Xeon Gold 5320 vs Intel Xeon Platinum 8180 Comparison

Intel
INTEL

Intel Xeon Gold 5320

CORE STATE Ice Lake-SP
CORE SPECS 26 Cores / 52 Threads
CLOCK SPEED 2.2 Base / 3.4 GHz Turbo
CACHE 39 MB (shared)
MAX TDP 185W
ARCHITECTURE Ice Lake
nm
PROCESS 10 nm
LAUNCH DATE 2021
VS
Intel
INTEL

Xeon Platinum 8180

CORE STATE Skylake-SP
CORE SPECS 28 Cores / 56 Threads
CLOCK SPEED 2.5 Base / 3.8 GHz Turbo
CACHE 38.5 MB (shared)
MAX TDP 205W
ARCHITECTURE Skylake
nm
PROCESS 14 nm
LAUNCH DATE 2017

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
3,217
3,277
cinebench_cinebench_r15_singlecore
454
462
cinebench_cinebench_r20_multicore
13,408
13,658
cinebench_cinebench_r20_singlecore
1,892
1,928
cinebench_cinebench_r23_multicore
31,924
32,520
cinebench_cinebench_r23_singlecore
4,506
4,591

Analysis: Intel Xeon Gold 5320 vs Intel Xeon Platinum 8180

The Intel Xeon Platinum 8180 and Intel Xeon Gold 5320 are both high-core-count server processors, but they represent different eras of Intel’s Xeon roadmap. The Platinum 8180 is a 28-core Skylake-SP part from 2017, while the Gold 5320 is a 26-core Ice Lake-SP chip from 2021. Benchmark data shows the older Platinum part holds a narrow but consistent lead across every Cinebench test, despite the Gold’s newer architecture and process node. This is a close contest decided by margins of roughly 2% or less, making the choice dependent on platform features rather than raw performance.

Head-to-Head Benchmarks

The Platinum 8180 wins all six head-to-head Cinebench comparisons, but the margins are slim. In Cinebench R15 multicore, the Platinum scores 3277 against the Gold’s 3217, a 1.9% advantage. The single-core R15 result is similar: 462 versus 454, a 1.8% lead. Moving to Cinebench R20, the multicore gap is 13658 versus 13408, again 1.9%, while single-core shows 1928 versus 1892, also 1.9%. The pattern holds in Cinebench R23, where the Platinum posts 32520 multicore and 4591 single-core, against the Gold’s 31924 and 4506, respectively — both by 1.9%.

These are not transformative differences. The largest absolute gap is in R23 multicore, where the Platinum leads by 596 points, but that represents less than 2% of the total score. In practice, this means the two CPUs are effectively interchangeable for compute-heavy workloads that scale across cores, at least within the margin of run-to-run variance. The Platinum’s win is consistent, but it is not a knockout.

The average benchmark scores tell the same story. The Platinum 8180 averages 9406 across its benchmark suite, while the Gold 5320 averages 9234. That is a 1.9% difference in the Platinum’s favor. Notably, the Platinum’s nearest rival is the Intel Atom x7835RE at 9430 (−0.3% delta), while the Gold’s closest competitor is the Intel Core i7-1165G7 at 9235 (0% delta). Both chips sit at the 65th percentile of all CPUs, meaning their overall standing in the database is identical despite the Platinum’s slight edge.

Where Each One Wins

The Platinum 8180 wins every benchmark in the comparison, so the use-case split is not about one part dominating a particular test. Instead, the data suggests both are suitable for the same class of workloads — multi-threaded server and workstation tasks like rendering, simulation, and virtualization. The Platinum’s two extra cores (28 versus 26) and higher clocks (2.50 GHz base, 3.80 GHz boost versus 2.20 GHz base, 3.40 GHz boost) give it a small but universal advantage.

The Gold 5320 does not win any benchmark, but it offers architectural advantages that do not show up in Cinebench scores. It supports eight-channel memory with a bandwidth of 191.6 GB/s, and it provides PCIe Gen 4 with 64 lanes (CPU only). The Platinum 8180 has no listed PCIe generation or lane count in the data, and its memory bus is unspecified. For workloads that depend on memory throughput or high-speed I/O, the Gold’s platform features could offset its slightly lower compute scores.

For pure CPU-bound tasks, the Platinum is the safer choice if you want maximum Cinebench performance. For systems that need the latest I/O standards or higher memory bandwidth, the Gold’s platform may be more practical, even if its compute scores lag by roughly 2%.

Architecture Differences

The two processors differ significantly in their underlying design. The Platinum 8180 uses the Skylake-SP architecture on a 14 nm process, with 8,000 million transistors. It has 28 cores and 56 threads. The Gold 5320 uses the Ice Lake-SP architecture on a 10 nm process, with 26 cores and 52 threads. The Gold’s transistor count is not listed in the data.

Cache configurations are nearly identical per core: both have 64 KB of L1 per core and 1 MB of L2 per core. The shared L3 differs slightly — the Platinum has 38.5 MB, while the Gold has 39 MB. That is a 0.5 MB advantage for the Gold, but it is unlikely to matter in most workloads.

The sockets are incompatible. The Platinum 8180 uses Intel Socket 3647, while the Gold 5320 uses Intel Socket 4189. This means a motherboard upgrade is mandatory when moving from one to the other. The Gold’s socket is newer and aligns with its Ice Lake generation, which also brings the eight-channel memory controller and PCIe Gen 4 support mentioned above.

Memory support is DDR4 for both, and both support ECC memory. The Gold lists an eight-channel memory bus and a memory bandwidth of 191.6 GB/s; the Platinum does not list these figures. Both have locked multipliers, so overclocking is not an option. The Gold is marked as “Active” in production status, while the Platinum’s status is not listed. The Platinum launched on 2017-07-10, and the Gold launched on 2021-04-05.

The Verdict

From the benchmark data alone, the Intel Xeon Platinum 8180 is the faster processor. It wins every Cinebench test by 1.8% to 1.9%, and its average benchmark score is 172 points higher. If your priority is raw multi-threaded compute, the Platinum is the clear pick. Its 28 cores and higher boost clock of 3.80 GHz give it an edge that the Gold cannot overcome, despite the Gold’s newer architecture.

However, the Gold 5320 should not be dismissed. It loses by a small margin, but it offers platform features that the Platinum does not: PCIe Gen 4 with 64 lanes and an eight-channel memory bus with 191.6 GB/s of bandwidth. These are critical for storage-heavy servers, high-speed networking, or memory-bandwidth-sensitive applications. The Gold also has a slightly larger L3 cache (39 MB versus 38.5 MB) and a lower TDP of 185 W versus 205 W.

The practical recommendation depends on your hardware ecosystem. If you are building a new system today and want the latest I/O standards, the Gold 5320 is the better platform choice, even if it gives up about 2% in Cinebench scores. If you already own a Socket 3647 motherboard and want maximum compute performance without a platform swap, the Platinum 8180 is the better upgrade. The data does not support calling one a universal winner — it supports calling the Platinum a compute winner and the Gold a platform winner.

FAQ

Q: Which processor has higher multi-core performance in Cinebench R23?

A: The Intel Xeon Platinum 8180 scores 32520 in Cinebench R23 multicore, beating the Intel Xeon Gold 5320’s 31924 by 1.9%.

Q: Does the Intel Xeon Gold 5320 win any benchmark in the head-to-head comparison?

A: No. The Platinum 8180 wins all six Cinebench tests (R15, R20, and R23, both single-core and multicore) by margins of 1.8% to 1.9%.

Q: What is the memory bandwidth of the Intel Xeon Gold 5320?

A: The Gold 5320 has an eight-channel memory bus with a memory bandwidth of 191.6 GB/s. The Platinum 8180 does not have a listed memory bus or bandwidth in the data.

Q: Are these two processors socket-compatible?

A: No. The Platinum 8180 uses Intel Socket 3647, while the Gold 5320 uses Intel Socket 4189.

Q: How do their core counts compare?

A: The Platinum 8180 has 28 cores and 56 threads, while the Gold 5320 has 26 cores and 52 threads.

Q: Do both processors support ECC memory?

A: Yes, both the Platinum 8180 and the Gold 5320 have ECC memory support.

Specification Differences

| Specification | Intel Xeon Platinum 8180 | Intel Xeon Gold 5320 |

|---|---|---|

| Cores | 28 | 26 |

| Threads | 56 | 52 |

| Base Clock | 2.50 GHz | 2.20 GHz |

| Boost Clock | 3.80 GHz | 3.40 GHz |

| TDP | 205 W | 185 W |

| Socket | Intel Socket 3647 | Intel Socket 4189 |

| Architecture | Skylake | Ice Lake |

| Codename | Skylake-SP | Ice Lake-SP |

| Process Node | 14 nm | 10 nm |

| Transistors | 8,000 million | Not listed |

| L3 Cache | 38.5 MB (shared) | 39 MB (shared) |

| Memory Bus | Not listed | Eight-channel |

| Memory Bandwidth | Not listed | 191.6 GB/s |

| PCIe | Not listed | Gen 4, 64 Lanes (CPU only) |

| Production Status | Not listed | Active |

| Release Date | 2017-07-10 | 2021-04-05 |

| Part Number | SR377CD8067303314400 | Not listed |

DETAILED SPECIFICATIONS

SPECIFICATION
Gold 5320
Platinum 8180
Core Specs
Cores
26
28 +7.7%
Threads
52
56 +7.7%
Base Clock (GHz)
2.2
2.5 +13.6%
Boost Clock (GHz)
3.4
3.8 +11.8%
Frequency (GHz)
2.2
2.5 +13.6%
Turbo Clock (GHz)
3.4
3.8 +11.8%
Multiplier
22
25 +13.6%
SMP CPUs
2
8 +300.0%
Cache
L1 Cache
64 KB (per core)
64 KB (per core)
L2 Cache
1 MB (per core)
1 MB (per core)
L3 Cache
39 MB (shared)
38.5 MB (shared)
Power
TDP (W)
185
205 +10.8%
Architecture
Architecture
Ice Lake
Skylake
Codename
Ice Lake-SP
Skylake-SP
Generation
Xeon Gold (Ice Lake-SP)
Xeon Platinum (Skylake-SP)
Process Size
10 nm
14 nm
Transistors
—
8,000 million
Foundry
Intel
Intel
Memory
Memory Support
DDR4
DDR4
Memory Bus
Eight-channel
—
Memory Bandwidth
191.6 GB/s
—
ECC Memory
Yes
Yes
Platform
Socket
Intel Socket 4189
Intel Socket 3647
PCIe
Gen 4, 64 Lanes(CPU only)
—
Other
Market
Server/Workstation
Server/Workstation
Production Status
Active
—
Part Number
—
SR377CD8067303314400
Package
FC-LGA4189
FC-LGA3647
View Xeon Gold 5320 Details View Xeon Platinum 8180 Details