Intel Core i7-4712HQ vs Intel Xeon E3-1505L v5 Comparison
Intel Core i7-4712HQ
Xeon E3-1505L v5
PERFORMANCE BENCHMARKS
Analysis: Intel Core i7-4712HQ vs Intel Xeon E3-1505L v5
The Intel Xeon E3-1505L v5 and the Intel Core i7-4712HQ are both end-of-life mobile processors with four cores and eight threads, but they target different use cases. Benchmark data shows the Xeon wins every recorded head-to-head test, with margins ranging from 10.7% to 10.9% across Cinebench versions. However, the Core i7 has a higher base clock (2.30 GHz vs 2.00 GHz) and boost clock (3.30 GHz vs 2.80 GHz), which suggests the Xeon’s architectural advantages in the Skylake generation offset its clock deficit. The Xeon also supports ECC memory and DDR4, while the Core i7 is limited to DDR3 and lacks ECC, making the Xeon the more workstation-oriented part despite its lower TDP of 25W versus 37W.
Where Each One Wins
The Xeon E3-1505L v5 is the clear winner in every benchmark category where data exists. In Cinebench R15 multicore, it scores 503 against the Core i7-4712HQ’s 454, a 10.8% advantage. The single-core result is nearly identical in margin: 71 versus 64, a 10.9% lead. This pattern holds across newer Cinebench versions — R20 multicore shows 2099 versus 1895 (10.8% ahead), and R23 multicore shows 4999 versus 4512 (10.8% ahead). The Xeon consistently delivers roughly an 11% performance edge in both single-threaded and multi-threaded workloads, which is unusual because most processors trade off between these two metrics.
The Core i7-4712HQ’s only potential wins are qualitative, not quantitative. It has a higher base clock (2.30 GHz vs 2.00 GHz) and a higher boost clock (3.30 GHz vs 2.80 GHz), which could benefit lightly threaded tasks that rely purely on frequency rather than IPC. However, the benchmark data does not support this — the Xeon wins Cinebench R15, R20, and R23 single-core tests by nearly identical margins to its multicore wins. The Core i7 also has a smaller die size advantage in terms of raw transistor count per mm², but that does not translate into any measured performance win.
The Xeon’s wins are consistent across every workload tested, from older R15 to newer R23. This suggests the Skylake architecture’s IPC advantage over Haswell is real and measurable, and it overcomes the Core i7’s clock speed advantage. For users running Cinebench-style rendering or similar multi-threaded workloads, the Xeon is the better choice by a solid margin.
Architecture Differences
The two processors come from different Intel generations and process nodes. The Xeon E3-1505L v5 uses Skylake-H architecture built on a 14 nm process, while the Core i7-4712HQ uses Haswell on a 22 nm process. This node shrink allows the Xeon to pack 2,300 million transistors into a 122 mm² die, whereas the Core i7 has 1,400 million transistors on a larger 177 mm² die. The smaller die and newer process explain how the Xeon achieves a lower TDP (25W vs 37W) while still delivering higher benchmark scores.
Cache configurations differ significantly. The Xeon has 8 MB of shared L3 cache, while the Core i7 has 6 MB. Both have 64 KB of L1 and 256 KB of L2 per core, so the Xeon’s advantage comes entirely from the larger last-level cache. Memory support also diverges: the Xeon supports both DDR3 and DDR4 with dual-channel memory and a bandwidth of 34.1 GB/s, while the Core i7 supports only DDR3 with 25.6 GB/s bandwidth. The Xeon also supports ECC memory, which is critical for workstation reliability; the Core i7 does not.
Other architectural differences include the integrated graphics. The Xeon uses HD Graphics P530, while the Core i7 uses Intel HD 4600. Both have PCIe Gen 3 with 16 lanes (CPU only), so that is identical. The Xeon’s market segment is Server/Workstation, while the Core i7 is classified as Mobile. The Xeon’s socket is Intel BGA 1440, whereas the Core i7 uses Intel BGA 1364, meaning they are not interchangeable in motherboards.
FAQ
Q: Which processor is faster in single-core benchmarks?
A: The Intel Xeon E3-1505L v5 wins all single-core tests. In Cinebench R15, it scores 71 versus 64 (10.9% ahead); in R20, 296 versus 267 (10.9% ahead); and in R23, 705 versus 637 (10.7% ahead).
Q: Does the Core i7-4712HQ win any benchmark that was measured?
A: No. The head-to-head data shows 6 wins for the Xeon and 0 wins for the Core i7. The Core i7’s only advantages are in clock speeds (2.30 GHz base, 3.30 GHz boost) and TDP, but those do not yield any benchmark victory.
Q: What memory types does each processor support?
A: The Xeon E3-1505L v5 supports both DDR3 and DDR4 with dual-channel memory and 34.1 GB/s bandwidth. The Core i7-4712HQ supports only DDR3 with 25.6 GB/s bandwidth. ECC memory is supported only on the Xeon.
Q: How do their cache sizes compare?
A: Both have 64 KB L1 and 256 KB L2 per core. The Xeon has 8 MB of shared L3 cache, while the Core i7 has 6 MB of shared L3 cache.
Q: Which processor has a lower power draw?
A: The Xeon E3-1505L v5 has a TDP of 25W, which is lower than the Core i7-4712HQ’s 37W. This is notable because the Xeon still outperforms the Core i7 in all tested benchmarks.
Q: Are these processors from the same generation?
A: No. The Xeon is from the Skylake-H generation (architecture: Skylake) on a 14 nm process, released in 2015. The Core i7 is Haswell generation on a 22 nm process, released in 2014.
Specification Differences
| Specification | Intel Xeon E3-1505L v5 | Intel Core i7-4712HQ |
|---|---|---|
| Base Clock | 2.00 GHz | 2.30 GHz |
| Boost Clock | 2.80 GHz | 3.30 GHz |
| TDP | 25W | 37W |
| Socket | Intel BGA 1440 | Intel BGA 1364 |
| Architecture | Skylake | Haswell |
| Codename | Skylake-H | Haswell |
| Process Node | 14 nm | 22 nm |
| Transistors | 2,300 million | 1,400 million |
| Die Size | 122 mm² | 177 mm² |
| L3 Cache | 8 MB (shared) | 6 MB (shared) |
| Memory Support | DDR3, DDR4 | DDR3 |
| Memory Bandwidth | 34.1 GB/s | 25.6 GB/s |
| ECC Memory | Yes | No |
| Integrated Graphics | HD Graphics P530 | Intel HD 4600 |
| Market Segment | Server/Workstation | Mobile |
| Launch MSRP | $433 | $378 |
| Release Date | 2015-10-26 | 2014-03-31 |
| Part Number | SR2E0 | SR1PZ |
Head-to-Head Benchmarks
The Xeon E3-1505L v5 dominates the Core i7-4712HQ across all six Cinebench tests, with margins that are remarkably consistent. In Cinebench R15 multicore, the Xeon scores 503 against 454, a 10.8% advantage. The single-core R15 test shows 71 versus 64, a 10.9% lead. This near-identical percentage in both tests suggests the Xeon’s advantage is architectural (higher IPC from Skylake) rather than frequency-dependent, since the Core i7 actually has higher clocks.
Moving to Cinebench R20, the pattern repeats. The Xeon scores 2099 in multicore versus 1895 for the Core i7, again a 10.8% margin. The single-core result is 296 versus 267, which is a 10.9% lead. The consistency across R15 and R20 indicates the performance gap is stable regardless of workload intensity or rendering complexity.
The newest test, Cinebench R23, shows the same story. The Xeon achieves 4999 in multicore versus 4512 for the Core i7, a 10.8% difference. In single-core, the Xeon scores 705 versus 637, a 10.7% margin. The Xeon also has a higher average benchmark score of 1446 compared to 1436 for the Core i7, placing them in the 38th and 37th percentiles of all CPUs, respectively.
The Core i7-4712HQ does have an additional Geekbench test result (2734 multicore, 923 single-core) that the Xeon lacks, but the head-to-head data does not include a Geekbench comparison. For users looking at raw Cinebench performance, the Xeon is clearly superior. Its lower TDP (25W vs 37W) and support for DDR4 and ECC memory make it the more capable workstation part, despite launching at a higher MSRP of $433 versus $378. The Core i7’s higher clock speeds (2.30 GHz base, 3.30 GHz boost) do not translate into any measured win, which highlights the Skylake architecture’s efficiency at lower frequencies.