Intel Core i7-4610M vs Intel Pentium Gold G5400 Comparison
Intel Core i7-4610M
Pentium Gold G5400
PERFORMANCE BENCHMARKS
Analysis: Intel Core i7-4610M vs Intel Pentium Gold G5400
Head-to-Head Benchmarks
The benchmark data tells a remarkably consistent story: the Intel Pentium Gold G5400 beats the Intel Core i7-4610M in every single head-to-head test, with all five wins going to the desktop part. There is no ambiguity here — the G5400 is faster across the board, and the margins are strikingly uniform.
Starting with Cinebench R15 multi-core, the G5400 scores 319 against the i7-4610M’s 277, a 13.2% advantage. That pattern repeats almost exactly in Cinebench R20 multi-core, where the G5400 posts 1331 versus 1155 — again a 13.2% gap. The single-core results follow the same trajectory: the G5400 leads 187 to 162 in Cinebench R20 single-core (a 13.4% delta), and 447 to 388 in Cinebench R23 single-core (a 13.2% delta). In Cinebench R23 multi-core, the G5400’s 3171 beats the i7-4610M’s 2750 by 13.3%.
What stands out is the consistency of the margin. Every test lands within a hair of 13%, whether it’s single-threaded or multi-threaded, old or new benchmark. That uniformity suggests the G5400’s advantage comes from a fundamental architectural edge rather than a workload-specific quirk. The i7-4610M is a Haswell mobile part from 2014; the G5400 is a Coffee Lake desktop chip from 2018. The generational leap in IPC, combined with the G5400’s higher 3.70 GHz base clock (the i7-4610M boosts to 3.70 GHz but runs at 3.00 GHz base), gives the Pentium a solid, repeatable lead.
The average benchmark scores confirm the head-to-head results. The i7-4610M averages 1094, while the G5400 averages 1091 — functionally identical overall. That near-parity is worth unpacking. The i7-4610M’s Geekbench scores (1903 multi-core, 1024 single-core) are included in its average, while the G5400’s average is built entirely from its five Cinebench results. So the two chips land at the same percentile (30th vs 30th) despite the G5400 winning every shared test. The practical takeaway: in the benchmarks where both are measured, the G5400 is clearly faster, but the i7-4610M’s overall standing is propped up by Geekbench numbers that don’t appear in the G5400’s data set.
The Verdict
If you are choosing between these two for any workload that appears in the benchmark suite, pick the Intel Pentium Gold G5400. It wins every head-to-head test by roughly 13%, and that margin is consistent across both single-core and multi-core workloads. There is no benchmark in the data where the i7-4610M comes out ahead — winsA is 0, winsB is 5.
The G5400’s nearest rivals include the Intel Core i5-3475S (deltaPct 0.0) and the Intel Core i7-10510Y (deltaPct -0.1), placing it in a performance tier that matches older desktop i5 parts. The i7-4610M’s nearest rivals include the Intel Core i5-3470S (deltaPct -0.1) and the Intel Core i7-2670QM (deltaPct -0.1), meaning it trades blows with a mobile Sandy Bridge quad-core from years earlier. The data positions the G5400 as the stronger performer in this pairing, period.
That said, the i7-4610M is not without context. It is a mobile part with a 37 W TDP, designed for laptops, while the G5400 is a 58 W desktop chip. If you are building or upgrading a desktop, the G5400 is the obvious choice from a pure performance standpoint. If you are working with an existing laptop that uses Socket G3, the i7-4610M is your upgrade path — but the benchmark data shows it is the slower chip in every measured test.
Where Each One Wins
The G5400 wins every benchmark category in the head-to-head data. Single-core workloads: it leads by 13.4% in Cinebench R20 single-core and 13.2% in Cinebench R23 single-core. Multi-core workloads: it leads by 13.2% in both Cinebench R15 and R20 multi-core, and by 13.3% in Cinebench R23 multi-core. If you are rendering, compiling, or doing anything that scales across threads, the G5400 is the stronger part. If you are doing anything that relies on single-threaded performance — older games, lightly-threaded productivity apps — the G5400 still wins.
The i7-4610M has no benchmark wins in this comparison. Its only claim to relevance is its mobile form factor and lower TDP. The data does not show a single workload where it outperforms the G5400. However, the i7-4610M does have Geekbench results (1903 multi-core, 1024 single-core) that are not part of the head-to-head set, and those scores contribute to its average benchmark score of 1094. That means in the broader benchmark landscape, the i7-4610M is competitive with the G5400’s overall average (1094 vs 1091), even though it loses every directly comparable test.
FAQ
Q: Which CPU is faster in multi-core workloads?
A: The Intel Pentium Gold G5400 wins all three multi-core tests: Cinebench R15 multi-core (319 vs 277), Cinebench R20 multi-core (1331 vs 1155), and Cinebench R23 multi-core (3171 vs 2750). The margin is consistently around 13.2%.
Q: Is the i7-4610M better in single-core performance?
A: No. The G5400 wins single-core tests by 13.4% in Cinebench R20 (187 vs 162) and 13.2% in Cinebench R23 (447 vs 388). The i7-4610M does not win any benchmark in the head-to-head set.
Q: How do their overall benchmark averages compare?
A: The i7-4610M has an average benchmark score of 1094, while the G5400 averages 1091. Both sit at the 30th percentile of all CPUs, so their overall standings are effectively tied despite the G5400 winning every shared test.
Q: Which CPU has a higher base clock?
A: The G5400 runs at 3.70 GHz base clock. The i7-4610M has a 3.00 GHz base clock and a 3.70 GHz boost clock. The G5400 has no boost clock listed in the data.
Q: What sockets do these CPUs use?
A: The i7-4610M uses Intel Socket G3 (a mobile socket), while the G5400 uses Intel Socket 1151 (a desktop socket). They are not interchangeable.
Q: Do both CPUs support the same memory type?
A: No. The i7-4610M supports DDR3 with dual-channel memory and 25.6 GB/s bandwidth. The G5400 supports DDR4 with dual-channel memory and 38.4 GB/s bandwidth. The G5400’s memory bandwidth is 12.8 GB/s higher.
Architecture Differences
The two chips come from different architectural eras. The i7-4610M is built on Haswell architecture using a 22 nm process node, fabricated by Intel with 960 million transistors on a 131 mm² die. It has 2 cores and 4 threads, with a base clock of 3.00 GHz and a boost clock of 3.70 GHz. The G5400 is a Coffee Lake part on a 14 nm process, with a 126 mm² die size and no transistor count listed. It also has 2 cores and 4 threads, but runs at a fixed 3.70 GHz with no boost clock.
Both CPUs share the same cache layout: 64 KB of L1 per core, 256 KB of L2 per core, and 4 MB of shared L3. Neither supports ECC memory, and both use a Gen 3 PCIe interface with 16 lanes (CPU only). The integrated graphics differ significantly — the i7-4610M carries Intel HD 4600, while the G5400 has UHD Graphics 610.
The market segments are fundamentally different. The i7-4610M is a mobile part with a 37 W TDP, released in January 2014. The G5400 is a desktop part with a 58 W TDP, released in April 2018. The G5400’s newer process node (14 nm vs 22 nm) and newer architecture (Coffee Lake vs Haswell) explain its consistent benchmark advantage despite the i7’s higher-tier branding.
Specification Differences
The most obvious difference is socket and market segment: the i7-4610M uses Intel Socket G3 and is a mobile chip, while the G5400 uses Intel Socket 1151 and is a desktop chip. The i7-4610M has a 37 W TDP; the G5400 draws 58 W. The i7-4610M has a 3.00 GHz base clock and 3.70 GHz boost clock; the G5400 has a 3.70 GHz base clock and no boost clock.
Memory support differs: the i7-4610M uses DDR3 with 25.6 GB/s bandwidth, while the G5400 uses DDR4 with 38.4 GB/s bandwidth. The process nodes differ (22 nm for Haswell, 14 nm for Coffee Lake), as do the die sizes (131 mm² vs 126 mm²). Transistor counts are listed for the i7-4610M (960 million) but not for the G5400.
The integrated graphics differ: Intel HD 4600 on the i7-4610M versus UHD Graphics 610 on the G5400. Release dates are four years apart (January 2014 vs April 2018). The launch MSRP for the i7-4610M is $346; for the G5400 it is $64. Part numbers are SR1KY for the i7-4610M and SR3X9 for the G5400. Both have locked multipliers, both are end-of-life, and neither supports ECC memory.