Intel Core i5-110 vs Intel Core i5-14401TE Comparison

Head-to-Head Benchmarks

The recorded data shows no benchmark submissions for either processor in the database. Both the Intel Core i5-110 and the Intel Core i5-14401TE return zero average benchmark scores, and their head-to-head benchmark table is empty. As a result, there are no exact numerical wins, no percentage deltas, and no percentile shifts to compare directly. Both parts sit at the 50th percentile among all CPUs tracked, which indicates they occupy a middle position in the overall distribution, but that percentile is based on the aggregate population, not on measured performance between these two specific units.

Without recorded scores, the biggest differentiators come from the specification sheet rather than from execution times. The Core i5-14401TE carries a higher boost clock of 4.50 GHz versus 4.30 GHz for the Core i5-110, which suggests a ceiling advantage in lightly threaded bursts. The Core i5-110 counters with a substantially higher base clock of 2.90 GHz versus 2.00 GHz, implying that sustained all-core workloads may favor the older part if power limits allow it to hold that frequency. Neither processor offers an unlocked multiplier, so overclocking headroom is not a factor in either direction.

The thermal design point differs meaningfully. The Core i5-14401TE is rated at 45 W TDP, while the Core i5-110 is rated at 65 W TDP. That 20 W gap in the power envelope points toward the newer part being more efficient under load, though the database does not include measured power draw or temperature data to confirm real-world behavior. The Core i5-110 uses the older Intel Socket 1200 platform, while the Core i5-14401TE uses Intel Socket 1700, so any comparison of the two in a live system would require different motherboards.

Where Each One Wins

The Core i5-110 wins on base clock frequency. At 2.90 GHz, it starts from a much higher idle-to-load floor than the Core i5-14401TE's 2.00 GHz. For workloads that are heavily dependent on sustained all-core operation without reaching boost states, such as certain encoding loops or compilation tasks, the higher base clock gives the Core i5-110 a structural advantage on paper. It also carries a larger L1 cache per core at 64 KB versus 80 KB for the Core i5-14401TE, though that specific comparison favors the newer part, not the older one. The Core i5-110 does have a smaller L2 at 256 KB per core versus 1.25 MB per core, so latency-sensitive workloads that repeatedly hit the L2 would likely favor the Core i5-14401TE.

The Core i5-14401TE wins on raw boost ceiling, cache capacity, PCIe generation, memory flexibility, and integrated graphics tier. Its 4.50 GHz boost clock exceeds the Core i5-110's 4.30 GHz by 200 MHz, which translates into a theoretical advantage for single-threaded and short-burst workloads. The L3 cache jumps from 12 MB shared on the Core i5-110 to 20 MB shared on the Core i5-14401TE, a 66.7% increase in last-level cache capacity. The L2 cache per core is nearly five times larger on the newer part at 1.25 MB versus 256 KB. That cache hierarchy difference could reduce memory traffic for datasets that fit within the larger intermediate cache levels.

Memory support also splits the two. The Core i5-14401TE supports both DDR4 and DDR5, giving platform builders a choice of memory generations. The Core i5-110 only supports DDR4, limiting it to the older standard. ECC memory is supported on the Core i5-14401TE but not on the Core i5-110, which matters for error-sensitive workloads. PCIe capability differs as well: the Core i5-14401TE provides Gen 5 with 16 lanes from the CPU, while the Core i5-110 provides Gen 3 with 16 lanes. For storage or GPU connectivity, the newer part offers significantly higher interface bandwidth. The integrated graphics also differ, with the Core i5-14401TE shipping UHD Graphics 730 versus UHD Graphics 630 on the Core i5-110, a generational step that typically improves media and display output capabilities, though no benchmark scores are present to quantify it.

Architecture Differences

The Core i5-110 is built on Intel's Comet Lake architecture, a 14 nm process node from Intel's own foundry. It belongs to the Core i5 generation tagged Comet Lake. The Core i5-14401TE uses the Raptor Lake architecture, specifically the Raptor Lake-R refresh, fabricated on a 10 nm process node. The process node difference is significant: 14 nm versus 10 nm represents a full lithography generation gap. The die size for the Core i5-14401TE is recorded at 215 mm², while the Core i5-110 has no die size listed in the database.

Both processors have 6 physical cores and 12 threads, so the execution resource count matches. The per-core cache layout differs substantially. The Core i5-110 uses 64 KB of L1 per core, 256 KB of L2 per core, and 12 MB of shared L3. The Core i5-14401TE uses 80 KB of L1 per core, 1.25 MB of L2 per core, and 20 MB of shared L3. The newer architecture also brings PCIe Gen 5 support, which is a generation ahead of the Core i5-110's PCIe Gen 3. The memory controller on the Core i5-14401TE accepts DDR4 and DDR5, while the Core i5-110 is locked to DDR4 only. ECC is available on the Raptor Lake part but absent on the Comet Lake part.

The integrated graphics differ by model: UHD Graphics 730 on the Core i5-14401TE versus UHD Graphics 630 on the Core i5-110. The Core i5-14401TE also has a lower TDP of 45 W versus 65 W, which suggests a more power-efficient transistor design or more conservative frequency scheduling. The socket changes as well, with the Core i5-110 on Intel Socket 1200 and the Core i5-14401TE on Intel Socket 1700, meaning the two processors are not interchangeable in a single motherboard.

Specification Differences

The table below isolates only the fields where the two processors differ.

| Field | Intel Core i5-110 | Intel Core i5-14401TE |

|-------|-------------------|-----------------------|

| Base clock | 2.90 GHz | 2.00 GHz |

| Boost clock | 4.30 GHz | 4.50 GHz |

| TDP | 65 W | 45 W |

| Socket | Intel Socket 1200 | Intel Socket 1700 |

| Architecture | Comet Lake | Raptor Lake |

| Codename | Comet Lake | Raptor Lake-R |

| Generation | Core i5 (Comet Lake) | Core i5 (Raptor Lake Refresh) |

| Process node | 14 nm | 10 nm |

| Die size | Not listed | 215 mm² |

| L1 cache | 64 KB (per core) | 80 KB (per core) |

| L2 cache | 256 KB (per core) | 1.25 MB (per core) |

| L3 cache | 12 MB (shared) | 20 MB (shared) |

| Memory support | DDR4 | DDR4, DDR5 |

| Memory bandwidth | 42.7 GB/s | Not listed |

| ECC memory | False | True |

| PCIe | Gen 3, 16 Lanes (CPU only) | Gen 5, 16 Lanes (CPU only) |

| Integrated graphics | UHD Graphics 630 | UHD Graphics 730 |

| Release date | 2025-09-10 | 2024-06-30 |

| Launch MSRP | $200 | Not listed |

| Part number | SA35X | Q4T4SRNJP |

The Core i5-110 has a higher base clock and a lower boost clock, while the Core i5-14401TE has the opposite profile. The Core i5-14401TE also has a lower TDP, a smaller process node, a larger die size, more cache at every level, broader memory support, ECC capability, newer PCIe, a newer integrated GPU, and an earlier release date. The Core i5-110 has a listed memory bandwidth of 42.7 GB/s, while the Core i5-14401TE has no memory bandwidth figure in the database. The Core i5-110 carries a launch MSRP of $200, while the Core i5-14401TE has no launch MSRP recorded.

FAQ

Q: Which processor has the higher boost clock?

A: The Intel Core i5-14401TE has a boost clock of 4.50 GHz, compared to 4.30 GHz on the Intel Core i5-110.

Q: Which processor has the larger L3 cache?

A: The Intel Core i5-14401TE has 20 MB of shared L3 cache, while the Intel Core i5-110 has 12 MB of shared L3 cache.

Q: Does the Intel Core i5-110 support DDR5 memory?

A: No, the Intel Core i5-110 supports DDR4 only. The Intel Core i5-14401TE supports both DDR4 and DDR5.

Q: Which processor supports ECC memory?

A: The Intel Core i5-14401TE supports ECC memory. The Intel Core i5-110 does not.

Q: What is the TDP difference between the two processors?

A: The Intel Core i5-110 is rated at 65 W TDP, while the Intel Core i5-14401TE is rated at 45 W TDP.

Q: Which processor has the higher base clock?

A: The Intel Core i5-110 has a base clock of 2.90 GHz, while the Intel Core i5-14401TE has a base clock of 2.00 GHz.