Intel Core i3-N300 vs Intel Pentium Gold G5500 Comparison
Intel Core i3-N300
Pentium Gold G5500
PERFORMANCE BENCHMARKS
Analysis: Intel Core i3-N300 vs Intel Pentium Gold G5500
The Intel Core i3-N300 and Intel Pentium Gold G5500 occupy opposite ends of the Intel lineup, yet their average benchmark scores land nearly on top of each other. The i3-N300 posts an average of 1135, while the Pentium Gold G5500 sits at 1130, a gap of less than half a percent. Both chips rank in the 32nd percentile of all CPUs, meaning they land in the same performance tier despite their radically different designs. The i3-N300 is a mobile-oriented, 8-core Gracemont part with a 7W TDP, while the G5500 is a desktop Coffee Lake chip with 2 cores and 4 threads at 54W. The data shows a clear split: the i3-N300 dominates in most Cinebench tests, but the G5500 strikes back in one multi-core workload, making the choice highly dependent on the specific application.
FAQ
Q: Which CPU has more cores?
A: The Intel Core i3-N300 has 8 cores and 8 threads. The Intel Pentium Gold G5500 has 2 cores and 4 threads.
Q: Is the Pentium Gold G5500 faster in any benchmark?
A: Yes. In Cinebench R23 multi-core, the G5500 scores 3285 against the i3-N300's 2546, winning by 22.5%.
Q: How large is the i3-N300's advantage in single-core performance?
A: In Cinebench R23 single-core, the i3-N300 scores 513 versus 463 for the G5500, a 10.8% lead. The gap is even larger in Cinebench R20 single-core, where the i3-N300 wins by 106.7% (401 vs 194).
Q: Do these CPUs support ECC memory?
A: Only the Intel Pentium Gold G5500 supports ECC memory. The i3-N300 does not.
Q: What is the difference in memory channels?
A: The i3-N300 uses a single-channel memory bus, while the G5500 uses dual-channel memory. Both have a peak memory bandwidth of 38.4 GB/s.
Q: Which CPU is still in production?
A: The Intel Core i3-N300 is listed as Active. The Intel Pentium Gold G5500 is End-of-life.
Architecture Differences
The two processors are built on fundamentally different architectures and process nodes. The i3-N300 uses Intel's Gracemont architecture, a 10nm design, and belongs to the Core i3 (Alder Lake-N) generation. It packs 8 Gracemont efficiency cores, each with 96 KB of L1 cache and 2 MB of L2 per module, plus 6 MB of shared L3 cache. The G5500 is a Coffee Lake part on Intel's 14nm node, with 2 cores and 4 threads, using 64 KB of L1 per core, 256 KB of L2 per core, and 4 MB of shared L3. The die size also differs: the G5500 measures 126 mm², while the i3-N300's die size is not listed.
The i3-N300 is a mobile chip with a 7W TDP, whereas the G5500 is a desktop processor with a 54W TDP. This power envelope difference is enormous — the G5500 draws over seven times the power of the i3-N300. Connectivity also diverges: the i3-N300 offers PCIe Gen 3 with 9 lanes (CPU only), while the G5500 provides Gen 3 with 16 lanes. The integrated graphics differ too, with the i3-N300 featuring UHD Graphics 770 and the G5500 using UHD Graphics 630. Memory support is another split: the i3-N300 supports both DDR4 and DDR5, while the G5500 is limited to DDR4. The i3-N300's socket is Intel BGA 1264, while the G5500 uses Intel Socket 1151.
Head-to-Head Benchmarks
The head-to-head data reveals a lopsided rivalry with one notable exception. Across five Cinebench tests, the i3-N300 wins four, but the G5500 claims the most recent multi-core test. Starting with Cinebench R15 multi-core, the i3-N300 scores 416 against the G5500's 330, a 26.1% advantage. The i3-N300's lead expands dramatically in Cinebench R20 multi-core, where it scores 2849 versus 1379 for the G5500 — a 106.6% difference, meaning the i3-N300 is more than twice as fast in that workload.
Single-core results follow a similar pattern. In Cinebench R20 single-core, the i3-N300 posts 401 against the G5500's 194, another 106.7% blowout. The i3-N300 also wins Cinebench R23 single-core with 513 versus 463, a narrower but still decisive 10.8% margin. However, the G5500 takes Cinebench R23 multi-core outright, scoring 3285 against the i3-N300's 2546, a 22.5% victory. This result is striking because it reverses the trend seen in R15 and R20 multi-core, where the i3-N300 held a massive lead. The benchmark results indicate that the G5500's dual-core design with higher base clock (3.80 GHz vs 1.00 GHz on the i3-N300, which boosts to 3.70 GHz) can outperform the 8-core Gracemont part in certain sustained multi-threaded loads, likely due to thermal or power constraints on the mobile chip.
Specification Differences
The specification sheets show two very different products. The i3-N300 has 8 cores and 8 threads, while the G5500 has 2 cores and 4 threads. Base clocks differ sharply: the i3-N300 runs at 1.00 GHz with a 3.70 GHz boost, while the G5500 runs at a fixed 3.80 GHz with no boost clock listed. TDP is the most dramatic difference — the i3-N300 consumes 7W versus the G5500's 54W. The process node also differs: the i3-N300 uses 10nm, the G5500 uses 14nm.
Cache configurations are distinct. The i3-N300 has 96 KB of L1 per core, 2 MB of L2 per module, and 6 MB of shared L3. The G5500 has 64 KB of L1 per core, 256 KB of L2 per core, and 4 MB of shared L3. Memory support diverges: the i3-N300 accepts DDR4 and DDR5, while the G5500 only supports DDR4. The memory bus is single-channel on the i3-N300 and dual-channel on the G5500, though both top out at 38.4 GB/s bandwidth. ECC memory is supported only on the G5500. PCIe lanes differ, with the i3-N300 offering 9 lanes and the G5500 offering 16, both Gen 3. The integrated GPU is newer on the i3-N300 (UHD Graphics 770) versus the G5500 (UHD Graphics 630). The market segment is Mobile for the i3-N300 and Desktop for the G5500. Production statuses are Active versus End-of-life. Release dates are 2023-01-02 for the i3-N300 and 2018-04-01 for the G5500. The i3-N300 launch MSRP is $309; the G5500 launch MSRP is $75.
Where Each One Wins
The i3-N300 is the clear winner in raw multi-threaded throughput in most tests. It beats the G5500 by 26.1% in Cinebench R15 multi-core and by 106.6% in Cinebench R20 multi-core, making it the better choice for workloads that scale across cores, such as compiling, rendering, or any modern multi-threaded application that leverages more than a couple of threads. It also wins single-core performance in both R20 (by 106.7%) and R23 (by 10.8%), which means it handles everyday responsive tasks and lightly-threaded applications with more headroom. The i3-N300 also brings a lower TDP, which suits fanless or battery-powered mobile designs, and supports newer DDR5 memory.
The Pentium Gold G5500 wins only one benchmark, but it is a significant one: Cinebench R23 multi-core, where it leads by 22.5%. This suggests that in a sustained multi-core render that stresses the CPU over a longer period, the G5500's higher base clock and desktop power budget can overcome the i3-N300's core count. The G5500 also supports ECC memory, which the i3-N300 lacks, and offers dual-channel memory, which can benefit memory-sensitive workloads despite the identical peak bandwidth. Its desktop socket (Socket 1151) and 16 PCIe lanes make it a more flexible platform for builders who need expansion options, and its 4 MB of L3 cache, while smaller, is paired with a higher per-core clock speed.
The Verdict
Benchmark data shows the Intel Core i3-N300 is the better overall performer, winning 4 out of 5 head-to-head tests. Its advantage in Cinebench R20 multi-core (106.6%) and single-core (106.7%) is overwhelming, and it also leads in R15 multi-core (26.1%) and R23 single-core (10.8%). The i3-N300 is the sensible pick for anyone building a low-power mobile system or a compact PC that needs strong multi-threaded performance without a high TDP. The data supports choosing it for tasks like software compilation, video encoding, or running many browser tabs, where its 8 cores provide a clear edge.
However, the G5500's win in Cinebench R23 multi-core (22.5% ahead) is not an anomaly to ignore. It indicates that for certain long-running, heavily threaded workloads, the desktop chip's sustained clock speed can outpace the mobile chip's efficiency cores. The G5500 is the better choice for a desktop builder who wants ECC memory support, dual-channel memory, and a platform with more PCIe lanes. Its launch MSRP of $75 is also lower than the i3-N300's $309, though the i3-N300 is a mobile part with a different pricing structure. If the workload is dominated by Cinebench R23-style rendering, the G5500 wins; if the workload is more varied and includes lighter multi-threading, the i3-N300 is the safer bet. The data ultimately points to the i3-N300 as the more versatile chip, but the G5500 remains a viable niche pick for specific sustained multi-core tasks.