Intel Core i3-7300T vs Intel Pentium Gold G6600 Comparison
Intel Core i3-7300T
Pentium Gold G6600
PERFORMANCE BENCHMARKS
Analysis: Intel Core i3-7300T vs Intel Pentium Gold G6600
The Intel Pentium Gold G6600 and Intel Core i3-7300T are two dual-core, four-thread desktop processors from different Intel generations, yet they land in the same performance percentile. Both sit at the 34th percentile of all CPUs, and their average benchmark scores are close: 1235 for the Pentium Gold G6600 versus 1211 for the Core i3-7300T. The data reveals a consistent, though narrow, edge for the newer Pentium part across every tested workload, but the story is more nuanced than a simple win-loss tally. The Core i3-7300T counters with a dramatically lower 35W TDP, making the choice between them a question of raw clock speed versus power efficiency.
Where Each One Wins
The benchmark data is unambiguous: the Intel Pentium Gold G6600 wins all five head-to-head Cinebench tests. This sweep includes both multicore and single-core workloads, covering Cinebench R15, R20, and R23. The margins are small but uniform, ranging from 1.9% to 2%. This suggests the Pentium Gold G6600 holds a slight but consistent advantage in rendering tasks, whether the workload uses one core or all four threads. Its higher base clock of 4.20 GHz, compared to 3.50 GHz for the Core i3-7300T, is the likely driver of this pattern, as both chips share the same core and thread counts.
The Intel Core i3-7300T, while losing every benchmark, wins decisively in the power envelope. Its TDP is 58W for the Pentium Gold G6600 versus 35W for the Core i3-7300T. That is a 23W difference, which represents a 40% reduction in thermal design power for the older chip. For scenarios where heat output, cooling requirements, or electricity consumption are the primary constraints, the Core i3-7300T is the clear choice despite its lower scores. The data does not include any efficiency-per-watt metric, but the raw TDP figures speak for themselves.
Another differentiating factor is platform compatibility. The Pentium Gold G6600 uses Intel Socket 1200, while the Core i3-7300T uses Intel Socket 1151. These are not interchangeable, so the "winner" in a system build depends on which motherboard platform is already in place or preferred. The Pentium Gold G6600 also has a newer release date, coming out in 2020-04-29 versus 2017-01-02 for the Core i3-7300T, which may matter for users seeking a more modern socket with potential upgrade paths.
FAQ
Q: Which processor has the higher average benchmark score?
A: The Intel Pentium Gold G6600 has an average benchmark score of 1235, while the Intel Core i3-7300T scores 1211. This gives the Pentium part a 2% advantage in aggregate performance.
Q: How do the two compare in single-core performance?
A: The Pentium Gold G6600 wins both single-core tests. It scores 212 in Cinebench R20 single-core versus 208 for the Core i3-7300T, and 506 versus 496 in Cinebench R23 single-core. The deltas are 1.9% and 2%, respectively.
Q: Is there any benchmark where the Core i3-7300T wins?
A: No. Across the five head-to-head Cinebench tests—R15 multicore, R20 multicore, R20 single-core, R23 multicore, and R23 single-core—the Pentium Gold G6600 wins all of them.
Q: What is the TDP difference between the two chips?
A: The Intel Pentium Gold G6600 has a TDP of 58W, while the Intel Core i3-7300T has a TDP of 35W. The Core i3-7300T draws significantly less power and produces less heat.
Q: Do they use the same CPU socket?
A: No. The Pentium Gold G6600 uses Intel Socket 1200, while the Core i3-7300T uses Intel Socket 1151. They are not compatible with the same motherboards.
Q: What are their memory bandwidth ratings?
A: The Pentium Gold G6600 supports 42.7 GB/s of memory bandwidth, while the Core i3-7300T supports 38.4 GB/s. Both use dual-channel DDR4 memory.
Head-to-Head Benchmarks
The Cinebench results tell a consistent story of narrow margins. In Cinebench R15 multicore, the Pentium Gold G6600 scores 361 against 354 for the Core i3-7300T, a 2% difference. This pattern repeats in Cinebench R20 multicore, where the scores are 1507 and 1477, again a 2% gap. The multicore advantage holds in Cinebench R23, with the Pentium part scoring 3589 versus 3519, another 2% lead.
Single-core results follow the same trajectory. In Cinebench R20 single-core, the Pentium Gold G6600 posts 212 points, while the Core i3-7300T posts 208. That is a 1.9% edge. In Cinebench R23 single-core, the scores are 506 and 496, respectively, a 2% margin. The uniformity of these deltas is striking—every test lands at roughly 2%, regardless of whether it stresses one core or all four. This points to the base clock difference as the primary factor, since the Pentium Gold G6600 runs at 4.20 GHz compared to 3.50 GHz for the Core i3-7300T.
The average benchmark scores reinforce this picture. The Pentium Gold G6600 averages 1235, which places it exactly at the same level as the Intel Core i3-8109U (deltaPct 0) and slightly ahead of the Intel Xeon E3-1235L v5 (deltaPct 0.2). The Core i3-7300T averages 1211, matching the Intel Xeon E5645 (deltaPct 0) and edging out the Intel Core i3-8121U (deltaPct 0.2). Both chips sit at the 34th percentile of all CPUs, meaning they are near the middle-low end of the performance distribution, but the Pentium Gold G6600 does so with a 2% higher average score.
Specification Differences
The two processors share several core specifications: both have 2 cores, 4 threads, 64 KB of L1 cache per core, 256 KB of L2 cache per core, and 4 MB of shared L3 cache. Both are built on a 14 nm process node by Intel, support dual-channel DDR4 memory, lack ECC memory support, and offer PCIe Gen 3 with 16 lanes from the CPU. Neither has an unlocked multiplier.
The differences begin with clock speed. The Pentium Gold G6600 has a base clock of 4.20 GHz, while the Core i3-7300T has a base clock of 3.50 GHz. Neither chip has a boost clock listed. The TDP also diverges sharply: 58W for the Pentium Gold G6600 versus 35W for the Core i3-7300T. Memory bandwidth differs as well, with the Pentium part rated at 42.7 GB/s and the Core i3 at 38.4 GB/s.
Socket and platform are major differentiators. The Pentium Gold G6600 uses Intel Socket 1200, while the Core i3-7300T uses Intel Socket 1151. The integrated graphics also differ in branding: the Pentium Gold G6600 has UHD Graphics 630, while the Core i3-7300T has Intel HD 630. Release dates are far apart, with the Pentium Gold G6600 launching on 2020-04-29 and the Core i3-7300T on 2017-01-02. Their part numbers are SRH3S and SR35M, respectively.
Architecture Differences
Both processors are built on Intel's 14 nm process node, but they belong to different microarchitectures and generations. The Intel Pentium Gold G6600 is based on Comet Lake, which is the newer architecture, while the Intel Core i3-7300T is based on Kaby Lake. The generation field confirms this: the Pentium Gold G6600 is listed as "Pentium Gold (Comet Lake)" and the Core i3-7300T as "Core i3 (Kaby Lake)."
Despite the architecture gap, the cache hierarchy is identical. Both have 64 KB of L1 per core, 256 KB of L2 per core, and 4 MB of shared L3. This means the performance difference is not driven by cache capacity but by clock speed and possibly minor IPC improvements in Comet Lake over Kaby Lake. The memory bandwidth advantage for the Pentium Gold G6600—42.7 GB/s versus 38.4 GB/s—suggests a slightly wider memory interface or improved memory controller, though both support dual-channel DDR4.
The integrated graphics differ in name, with the Pentium Gold G6600 featuring UHD Graphics 630 and the Core i3-7300T featuring Intel HD 630. The PCIe implementation is the same: Gen 3 with 16 lanes from the CPU. The production status for both is listed as Active, meaning neither is discontinued. The market segment for both is Desktop.
The Verdict
The data supports a clear split decision. For users who prioritize raw performance in CPU-bound tasks like rendering, the Intel Pentium Gold G6600 is the better choice. It wins every benchmark in the comparison, with margins of 1.9-2% across all Cinebench tests. Its higher 4.20 GHz base clock and 42.7 GB/s memory bandwidth give it a measurable edge in both single-core and multicore workloads. The average benchmark score of 1235 versus 1211 confirms this advantage. A user building a new system on Intel Socket 1200 and seeking the best possible performance in this dual-core class should pick the Pentium Gold G6600.
For users who prioritize power efficiency or have a motherboard with Intel Socket 1151, the Intel Core i3-7300T is the sensible pick. Its 35W TDP is substantially lower than the 58W TDP of the Pentium Gold G6600, making it suitable for compact builds, small form factor systems, or environments where heat and noise are concerns. The performance penalty is small—roughly 2% in the tested benchmarks—which may be an acceptable trade-off for a 40% reduction in thermal design power. The Core i3-7300T also benefits from being an older, established platform, which could mean lower-cost motherboards and broader availability in the used market.
Neither chip offers a decisive advantage in features. Both have 2 cores, 4 threads, 4 MB of L3 cache, and no unlocked multiplier. The Pentium Gold G6600 has a newer architecture (Comet Lake) and a newer release date, but the Core i3-7300T remains competitive despite being from an older generation. The verdict is straightforward: the Pentium Gold G6600 for performance, the Core i3-7300T for efficiency. The 34th percentile ranking for both indicates they are entry-level parts, so the choice should be guided by the motherboard socket and power budget rather than expectations of high-end performance.