Intel Core 2 Extreme QX9650 vs Intel Core 2 Extreme QX9770 Comparison

Intel
INTEL

Intel Core 2 Extreme QX9650

CORE STATE Yorkfield
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 3 Base
CACHE —
MAX TDP 130W
ARCHITECTURE Core 2
nm
PROCESS 45 nm
LAUNCH DATE 2007
VS
Intel
INTEL

Core 2 Extreme QX9770

CORE STATE Yorkfield
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 3.2 Base
CACHE —
MAX TDP 136W
ARCHITECTURE Core 2
nm
PROCESS 45 nm
LAUNCH DATE 2008

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
209
231
cinebench_cinebench_r20_multicore
872
963
cinebench_cinebench_r20_singlecore
123
136
cinebench_cinebench_r23_multicore
2,077
2,295
cinebench_cinebench_r23_singlecore
293
324
geekbench_multicore
1,443
N/A
geekbench_singlecore
509
N/A

Analysis: Intel Core 2 Extreme QX9650 vs Intel Core 2 Extreme QX9770

The Intel Core 2 Extreme QX9770 and the Intel Core 2 Extreme QX9650 are near-identical twins separated by a single, decisive factor: clock speed. The benchmark data shows a consistent, predictable performance advantage for the QX9770 across every tested workload, with the QX9650 failing to secure a single victory. The QX9770 wins all five head-to-head comparisons, with margins hovering tightly between 10.4% and 10.6%, a direct reflection of its higher operating frequency. While both CPUs share the same architecture, cache, and core configuration, the QX9770's 3.20 GHz base clock versus the QX9650's 3.00 GHz base clock translates into a uniform performance uplift that makes it the unequivocal choice for anyone prioritizing raw compute throughput.

Head-to-Head Benchmarks

The QX9770's dominance is absolute and consistent. In Cinebench R15 multi-core, the QX9770 scores 231 against the QX9650's 209, a 10.5% advantage. This pattern repeats in Cinebench R20 multi-core, where the QX9770 posts 963 versus 872, a 10.4% lead. The single-core results tell the same story: in Cinebench R20 single-core, the QX9770 achieves 136 compared to the QX9650's 123, a 10.6% margin, and in Cinebench R23 single-core, the QX9770 scores 324 versus 293, again a 10.6% edge.

The most substantial gap emerges in Cinebench R23 multi-core, where the QX9770's 2295 outpaces the QX9650's 2077 by 10.5%. This is the largest absolute score difference in the entire comparison, highlighting how the clock speed advantage scales with sustained multi-threaded load. The consistency of the deltas—never straying far from the 10.5% mark—indicates that the performance difference is purely a function of frequency, with no architectural or cache-related variability muddying the results.

The average benchmark scores reinforce this narrative. The QX9770 holds an average score of 790, while the QX9650 sits at 789, a razor-thin 0.1% difference in aggregate. This near-identical average is deceptive, however, because the QX9650 has additional Geekbench results (1443 multi-core, 509 single-core) that are not present in the QX9770's benchmark suite. When isolating the shared Cinebench tests, the QX9770's advantage is unambiguous and consistent. The QX9770's percentile ranking of 21 versus the QX9650's 21 shows they occupy the same position relative to all CPUs, but the head-to-head data proves the QX9770 is the stronger silicon.

The Verdict

The data is unambiguous: the Intel Core 2 Extreme QX9770 is the superior processor. It wins every benchmark in the head-to-head comparison, with a minimum advantage of 10.4% and a maximum of 10.6%. The QX9650, despite being a capable four-core Extreme edition part, simply cannot match the QX9770's higher clock speed in any workload tested. For users who demand maximum performance in both single-threaded and multi-threaded applications, the QX9770 is the only rational choice from this pair.

The QX9650's sole saving grace is its lower TDP of 130 watts compared to the QX9770's 136 watts, a 6-watt difference that may appeal to those building a system with tighter thermal constraints. However, this marginal power saving does not compensate for the consistent 10%+ performance deficit in every benchmark. The QX9770 also launched later, on 2008-03-23, versus the QX9650's 2007-11-29, meaning it represents a later refinement of the same Yorkfield design. For anyone choosing between these two, the QX9770 is the definitive pick for pure performance, while the QX9650 might only be considered if power consumption is the absolute top priority, though the real-world impact of a 6-watt difference is minimal.

Architecture Differences

Both processors are built on the same fundamental architecture, which explains their nearly identical performance characteristics outside of clock speed. They share the "Core 2" architecture with the "Yorkfield" codename, are manufactured on Intel's 45 nm process node, and both contain 820 million transistors spread across a dual-die configuration with each die measuring 107 mm². The core configuration is identical: four cores with four threads, no hyper-threading, and no boost clock. The cache hierarchy is also the same, with 64 KB of L1 cache per core and 12 MB of shared L2 cache.

The only meaningful architectural difference is the base clock frequency. The QX9770 runs at 3.20 GHz, while the QX9650 runs at 3.00 GHz, a 200 MHz difference that directly accounts for the observed 10.5% performance delta. Both CPUs support DDR1, DDR2, and DDR3 memory through a dual-channel memory bus, and both feature PCIe Gen 2 connectivity. Neither has integrated graphics, though both can rely on "on certain motherboards (Chipset feature)" for display output, which is a motherboard-level capability rather than a CPU-integrated one. Both are end-of-life products with unlocked multipliers, indicating they were designed for enthusiast overclocking, though the stock clock difference already provides a clear performance hierarchy.

The release dates differ by roughly four months, with the QX9650 arriving on 2007-11-29 and the QX9770 following on 2008-03-23. This later launch allowed the QX9770 to achieve a higher frequency on the same 45 nm process, suggesting an improved yield or binning strategy. The part numbers also differ—SLAWM for the QX9770 and SLAN3 for the QX9650—but this has no bearing on performance. In essence, the architecture is identical; the QX9770 is simply a faster-binned version of the same silicon.

FAQ

Q: Which processor is faster in multi-core workloads?

A: The Intel Core 2 Extreme QX9770 wins all multi-core benchmarks. In Cinebench R15 multi-core, it scores 231 versus the QX9650's 209 (10.5% faster). In Cinebench R20 multi-core, it scores 963 versus 872 (10.4% faster), and in Cinebench R23 multi-core, it scores 2295 versus 2077 (10.5% faster).

Q: Is the QX9770 also faster in single-core tasks?

A: Yes. The QX9770 wins Cinebench R20 single-core with 136 against the QX9650's 123, a 10.6% lead, and Cinebench R23 single-core with 324 against 293, also a 10.6% lead. The single-core advantage matches the multi-core advantage, confirming the clock speed is the sole differentiator.

Q: Do these processors have the same core and thread counts?

A: Yes, both have exactly four cores and four threads. Neither supports hyper-threading, and both lack a boost clock, so the base clock is the maximum sustained frequency.

Q: What is the TDP difference between the two?

A: The QX9770 has a TDP of 136 watts, while the QX9650 has a TDP of 130 watts. The QX9770 consumes 6 watts more, which is a minor consideration given its consistent 10%+ performance advantage.

Q: Are there any benchmarks where the QX9650 wins?

A: No. In the head-to-head benchmark data, the QX9650 records zero wins across all five Cinebench tests. The QX9770 wins all five, with deltas ranging from 10.4% to 10.6%.

Q: How do these processors compare to other CPUs in the database?

A: Both processors sit at the 21st percentile of all CPUs. The QX9770's nearest rival is the QX9650 itself, with a 0.1% delta in average score, followed closely by the AMD Opteron 3350 HE and Intel Core i5-4210U, both within 0.3% of the QX9770's average score of 790.

Where Each One Wins

The QX9770 wins in every measurable performance category. It is faster in single-threaded workloads, as evidenced by its Cinebench R20 single-core score of 136 versus 123, and its Cinebench R23 single-core score of 324 versus 293. This makes it the better choice for older applications or lightly threaded tasks that rely on a single core's speed. It also wins decisively in multi-threaded workloads, with its Cinebench R15 multi-core score of 231 versus 209, Cinebench R20 multi-core score of 963 versus 872, and Cinebench R23 multi-core score of 2295 versus 2077. For rendering, video encoding, or any parallel workload, the QX9770 provides a consistent 10.5% throughput advantage.

The QX9650's only areas of relative strength are power consumption and launch timing. Its 130-watt TDP is lower than the QX9770's 136 watts, making it marginally more efficient under full load. It also launched earlier, on 2007-11-29, meaning it was available sooner for early adopters of the Yorkfield platform. However, neither of these advantages translates into a performance win. The QX9650 is not a CPU for users who want the fastest possible experience; it is a fallback option for those who prioritize a slightly lower power draw or who acquired it before the QX9770's launch on 2008-03-23. In any direct comparison, the QX9770 is the superior processor for all compute-intensive use cases.

Specification Differences

The two processors differ in only a handful of specification fields, all of which stem from the base clock frequency. The QX9770 has a base clock of 3.20 GHz, while the QX9650 has a base clock of 3.00 GHz. This is the primary differentiator and the sole source of the observed performance gap. The TDP also differs, with the QX9770 rated at 136 watts and the QX9650 at 130 watts, a 6-watt increase for the faster part. The release dates differ as well: the QX9770 launched on 2008-03-23, while the QX9650 launched on 2007-11-29. The part numbers are distinct, with the QX9770 carrying the SLAWM designation and the QX9650 carrying the SLAN3 designation.

All other specifications are identical. Both have four cores, four threads, no boost clock, Intel Socket 775, the Core 2 architecture, the Yorkfield codename, 45 nm process node, 820 million transistors, 2x 107 mm² die size, 64 KB L1 cache per core, 12 MB shared L2 cache, DDR1/DDR2/DDR3 memory support, dual-channel memory bus, no ECC support, PCIe Gen 2, no integrated graphics, desktop market segment, end-of-life production status, and unlocked multipliers. The average benchmark scores are also nearly identical (790 for the QX9770, 789 for the QX9650), but this is skewed by the QX9650's additional Geekbench results. In the shared Cinebench tests, the QX9770 is consistently and decisively ahead, making the base clock the defining specification difference between these two otherwise identical processors.

DETAILED SPECIFICATIONS

SPECIFICATION
2 Extreme QX9650
2 Extreme QX9770
Core Specs
Cores
4
4 0.0%
Threads
4
4 0.0%
Base Clock (GHz)
3
3.2 +6.7%
Frequency (GHz)
3
3.2 +6.7%
Multiplier
9
8 -11.1%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
64 KB (per core)
64 KB (per core)
L2 Cache
12 MB (shared)
12 MB (shared)
Power
TDP (W)
130
136 +4.6%
Architecture
Architecture
Core 2
Core 2
Codename
Yorkfield
Yorkfield
Generation
Core 2 Extreme (Yorkfield XE)
Core 2 Extreme (Yorkfield XE)
Process Size
45 nm
45 nm
Transistors
820 million
820 million
Die Size
2x 107 mm²
2x 107 mm²
Foundry
Intel
Intel
Memory
Memory Support
DDR1, DDR2, DDR3
DDR1, DDR2, DDR3
Memory Bus
Dual-channel
Dual-channel
ECC Memory
No
No
Platform
Socket
Intel Socket 775
Intel Socket 775
PCIe
Gen 2
Gen 2
Graphics
Integrated Graphics
On certain motherboards (Chipset feature)
On certain motherboards (Chipset feature)
Other
Market
Desktop
Desktop
Production Status
End-of-life
End-of-life
Part Number
SLAN3
SLAWM
Package
FC-LGA4
FC-LGA4
View Core 2 Extreme QX9650 Details View Core 2 Extreme QX9770 Details