AMD Ryzen 5 5625U vs AMD Ryzen 5 6600HS Comparison
AMD Ryzen 5 5625U
Ryzen 5 6600HS
PERFORMANCE BENCHMARKS
Analysis: AMD Ryzen 5 5625U vs AMD Ryzen 5 6600HS
The AMD Ryzen 5 6600HS and the AMD Ryzen 5 5625U are both six-core mobile processors, but benchmark results place them in distinct performance tiers. The 6600HS holds a clear lead across all shared Cinebench tests, while the 5625U offers a lower power envelope and broader memory compatibility. The following analysis breaks down the data from the FACT PACK to show exactly where each chip excels.
Head-to-Head Benchmarks
The 6600HS wins all four direct comparisons, with its largest margin coming in multi-threaded workloads. In Cinebench R15 multi-core, the 6600HS scores 1656 against 1447 for the 5625U, a delta of 14.4%. That is a substantial gap for two processors with identical core and thread counts, indicating that the 6600HS sustains higher throughput under full load.
The single-core results tell a similar but less extreme story. In Cinebench R23 single-core, the 6600HS posts 1465 versus 1379 for the 5625U, a 6.2% advantage. The R15 single-core test shows the same pattern: 235 for the 6600HS against 223 for the 5625U, a 5.4% lead. These margins suggest that the 6600HS benefits from a higher boost clock and architectural refinements, not just raw core count.
Multi-core performance scales that advantage further. In Cinebench R23 multi-core, the 6600HS reaches 9131, while the 5625U manages 8290. That is a 10.1% difference, slightly smaller than the R15 multi-core gap but still decisive. The delta between single-core and multi-core margins (6.2% vs 10.1% in R23) implies that the 6600HS handles thermal and power scaling better when all cores are active, maintaining its frequency advantage under sustained load.
The average benchmark score aggregates these results. The 6600HS sits at 3122, while the 5625U lands at 3096, a difference of 0.8% in the 6600HS’s favor. This narrow average gap is notable because the head-to-head tests show a much larger spread. The reason is that the 5625U has an additional Geekbench result (single-core 1521, multi-core 5718) that is not matched by a corresponding 6600HS entry, pulling its average closer. The Cinebench suite remains the cleanest comparison, and there the 6600HS is consistently ahead.
Looking at the nearest rivals provides context. The 6600HS’s closest competitor is the AMD Ryzen 3 5425U, which scores 3124 on average, a -0.1% delta from the 6600HS. The 5625U’s nearest rival is the Intel Xeon W-2133 at 3087, a 0.3% delta. Both chips sit around the 52nd percentile of all CPUs, meaning they are mid-pack performers overall, but the 6600HS’s percentile advantage comes from its stronger multi-core showing despite a nearly identical average score.
Where Each One Wins
The 6600HS wins every benchmark where both chips were tested. Its strongest category is multi-core throughput, where it leads by 14.4% in R15 and 10.1% in R23. This makes it the clear choice for rendering, video encoding, or any workload that scales across all six cores. The single-core wins of 5.4% and 6.2% also give it an edge in everyday responsiveness, though the margin is smaller.
The 5625U has no benchmark wins in the head-to-head data. However, its advantage lies outside raw performance. It is the only chip in this comparison with a Geekbench result, scoring 5718 multi-core and 1521 single-core. While this cannot be directly compared to the 6600HS, it indicates that the 5625U is not a slouch in general-purpose tasks. More importantly, the 5625U operates with a 15W TDP versus 35W for the 6600HS. That lower power draw makes it suitable for fanless or passively cooled designs, or for laptops where battery life takes priority over peak performance.
The 5625U also supports ECC memory, a feature absent from the 6600HS. This makes it relevant for workstation-style mobile systems where data integrity is critical. Its DDR4 memory support (51.2 GB/s bandwidth) is older but more widely available and cheaper than the DDR5 used by the 6600HS (76.8 GB/s). For users with existing DDR4 modules or those targeting a specific price point in a system build, the 5625U offers a practical path.
Architecture Differences
The two processors come from different generations and process nodes. The 6600HS uses Zen 3+ architecture on a 6 nm TSMC process, codenamed Rembrandt. The 5625U uses Zen 3 on a 7 nm TSMC process, codenamed Barcelo (part of the Cezanne family). The node shrink gives the 6600HS a transistor density advantage, though the 5625U is listed with 10,700 million transistors against an unspecified count for the 6600HS. The die sizes differ: 208 mm² for the 6600HS versus 180 mm² for the 5625U, meaning the 6600HS packs more functionality into a slightly larger area.
Both chips have 6 cores and 12 threads, with identical cache hierarchies: 64 KB L1 per core, 512 KB L2 per core, and 16 MB shared L3. The architectural difference lies in the core design. Zen 3+ is a refined version of Zen 3, offering modest IPC improvements and better power management. The 6600HS’s higher base clock (3.30 GHz vs 2.30 GHz) and boost clock (4.50 GHz vs 4.30 GHz) directly contribute to its benchmark wins.
The integrated graphics differ significantly. The 6600HS pairs with Radeon 660M, while the 5625U uses Radeon Vega 7. The 660M is based on a newer RDNA2 architecture, which typically delivers better performance per watt and features like hardware ray tracing support. The Vega 7 is an older GCN-based design. Neither chip has a benchmark score for graphics in this data, but the architectural generational gap is clear.
Memory and PCIe support also diverge. The 6600HS uses DDR5 with dual-channel support and 76.8 GB/s bandwidth, alongside PCIe Gen 4 with 20 lanes (CPU only). The 5625U uses DDR4 with 51.2 GB/s bandwidth and PCIe Gen 3 with 16 lanes. The 6600HS’s newer memory standard provides higher bandwidth, which matters for integrated graphics and memory-intensive workloads. The 5625U’s PCIe Gen 3 is adequate for most peripherals but limits high-speed NVMe storage or external GPU bandwidth compared to Gen 4.
Specification Differences
The two chips differ in several key specification fields. The 6600HS has a base clock of 3.30 GHz versus 2.30 GHz for the 5625U, and a boost clock of 4.50 GHz versus 4.30 GHz. The 6600HS carries a 35W TDP, while the 5625U is rated at 15W. They use different sockets: the 6600HS fits AMD Socket FP7, the 5625U uses AMD Socket FP6. Process nodes are 6 nm for the 6600HS and 7 nm for the 5625U.
Memory support is another differentiator: the 6600HS supports DDR5, the 5625U supports DDR4. Memory bandwidth follows, with 76.8 GB/s for the 6600HS and 51.2 GB/s for the 5625U. ECC memory is supported only on the 5625U. PCIe generations and lane counts differ: Gen 4 with 20 lanes for the 6600HS, Gen 3 with 16 lanes for the 5625U. Integrated graphics models are Radeon 660M versus Radeon Vega 7.
The 5625U has a recorded release date of 2022-01-05, while the 6600HS has no release date listed. Both chips are marked as Active in production and have locked multipliers. The 6600HS has a longer part number (100-000000546100-000000562) than the 5625U (100-000000583). Neither has a launch MSRP or a 3D V-Cache option. The 6600HS sits in the 6000 series, the 5625U in the 5000 series.
FAQ
Q: Which processor is faster in multi-core workloads?
A: The AMD Ryzen 5 6600HS wins both multi-core tests. It scores 1656 in Cinebench R15 multi-core versus 1447 for the 5625U, a 14.4% lead, and 9131 in R23 multi-core versus 8290, a 10.1% lead.
Q: Does the 5625U have any performance advantage?
A: In the head-to-head Cinebench tests, the 5625U does not win any of the four comparisons. It does have an additional Geekbench result (multi-core 5718, single-core 1521) that is not matched by the 6600HS, but this is not a direct comparison.
Q: What is the power consumption difference?
A: The 6600HS has a 35W TDP, while the 5625U is rated at 15W. This makes the 5625U more suitable for power-constrained designs, though the 6600HS delivers higher performance per the benchmark data.
Q: Do they support the same memory type?
A: No. The 6600HS supports DDR5 with 76.8 GB/s bandwidth, while the 5625U supports DDR4 with 51.2 GB/s bandwidth. Both use dual-channel memory buses.
Q: Which chip has ECC memory support?
A: Only the AMD Ryzen 5 5625U supports ECC memory. The 6600HS does not list ECC support in its specifications.
Q: Are the core and thread counts the same?
A: Yes, both processors have 6 cores and 12 threads. They also share the same cache configuration: 64 KB L1 per core, 512 KB L2 per core, and 16 MB shared L3.
The Verdict
The data points to a straightforward choice for raw performance: the AMD Ryzen 5 6600HS wins all four shared benchmarks, with margins ranging from 5.4% in single-core R15 to 14.4% in multi-core R15. Its higher clock speeds (3.30 GHz base, 4.50 GHz boost versus 2.30 GHz and 4.30 GHz), newer 6 nm process, and DDR5 support give it a clear edge in compute-heavy tasks. The 6600HS also benefits from PCIe Gen 4 and a newer integrated GPU architecture (Radeon 660M), positioning it for modern laptops where speed and bandwidth matter.
The AMD Ryzen 5 5625U is the pick for efficiency and flexibility. Its 15W TDP is less than half that of the 6600HS, making it viable for thinner, quieter systems with longer battery life. It supports ECC memory, a rare feature for a mobile chip, and uses DDR4, which remains widely compatible. Its Geekbench scores (5718 multi-core, 1521 single-core) show it is still capable for general productivity, even if it trails the 6600HS in the Cinebench suite.
The average benchmark scores are nearly identical (3122 for the 6600HS, 3096 for the 5625U, a 0.8% difference), which could mislead a casual reader. The head-to-head data corrects that impression: the 6600HS is consistently faster where it matters. The 5625U’s strengths are not in the benchmark numbers but in operational characteristics — power draw, memory ecosystem, and ECC support. Choose the 6600HS for performance, the 5625U for low-power or ECC-requiring deployments.