AMD PRO A12-9800 vs Intel Pentium Gold G6605 Comparison
AMD PRO A12-9800
Pentium Gold G6605
PERFORMANCE BENCHMARKS
Analysis: AMD PRO A12-9800 vs Intel Pentium Gold G6605
The AMD PRO A12-9800 and Intel Pentium Gold G6605 occupy nearly identical positions in the overall performance distribution, with the AMD part holding a 31st percentile rank and the Intel part also sitting at the 31st percentile. Their average benchmark scores are separated by a single point — 1104 for the AMD versus 1103 for the Intel — making them statistical peers in aggregate, yet the individual benchmark results tell a different story, with the Intel processor winning all five head-to-head tests by a consistent margin.
Where Each One Wins
The Intel Pentium Gold G6605 is the clear winner across every benchmark in the comparison set, taking all five head-to-head tests. Its advantages appear in both single-threaded and multi-threaded workloads. The Intel part wins the Cinebench R15 multicore test with a score of 384 against the AMD’s 323, and it maintains that edge in newer rendering workloads. In Cinebench R20 multicore, the Intel scores 1601 versus 1347 for the AMD, and in Cinebench R23 multicore, the Intel reaches 3814 while the AMD manages 3208.
Single-core performance follows the same pattern. The Intel Pentium Gold G6605 posts a Cinebench R20 single-core score of 225, which is 15.6% ahead of the AMD’s 190. In Cinebench R23 single-core, the Intel scores 538 against the AMD’s 453, a 15.8% lead. The consistency of these margins — all falling between 15.6% and 15.9% — indicates a uniform performance advantage rather than workload-specific strengths.
The AMD PRO A12-9800 does not win any benchmark in this comparison. Its wins column is zero. However, the AMD part does hold a negligible edge in the aggregate average benchmark score, 1104 versus 1103, which is within the noise of measurement. The AMD also matches the Intel part in market positioning, with both processors showing identical 31st percentiles among all CPUs.
Architecture Differences
The two processors come from fundamentally different design philosophies. The AMD PRO A12-9800 uses the Excavator architecture on the Bristol Ridge codename, built on a 28 nm process at GlobalFoundries. It integrates 3,100 million transistors on a 250 mm² die. The Intel Pentium Gold G6605 uses the Comet Lake architecture on the Comet Lake-R codename, fabricated on Intel’s 14 nm process. The Intel part’s transistor count and die size are not listed in the data.
Core configurations differ substantially. The AMD part has 4 physical cores and 4 threads, while the Intel part has 2 physical cores and 4 threads thanks to Hyper-Threading. Despite having half the physical cores, the Intel processor achieves higher multi-threaded scores, which points to a significant per-core performance advantage. The AMD’s base clock is 3.80 GHz with a boost clock of 4.20 GHz, while the Intel runs at a fixed 4.30 GHz base clock with no boost clock listed.
Cache hierarchies are structured differently. The AMD processor has 320 KB of L1 cache and 2 MB of L2 cache, with no L3 cache present. The Intel processor has 64 KB of L1 cache per core and 256 KB of L2 cache per core, plus a shared 4 MB L3 cache. The presence of L3 cache on the Intel part likely contributes to its performance advantage in repeated workloads.
Memory and platform support also diverge. Both support DDR4 memory with dual-channel buses, but the Intel part offers 42.7 GB/s of memory bandwidth versus 38.4 GB/s for the AMD. The Intel part provides 16 PCIe Gen 3 lanes from the CPU, while the AMD provides only 8. The Intel part uses Socket 1200, whereas the AMD uses Socket AM4. Neither processor supports ECC memory, and both have integrated graphics — Radeon R7 on the AMD and UHD Graphics 630 on the Intel. The Intel part carries a launch MSRP of $86.
Head-to-Head Benchmarks
The head-to-head results show a remarkably consistent performance gap. In Cinebench R15 multicore, the Intel Pentium Gold G6605 scores 384 against the AMD’s 323, a delta of -15.9% from the AMD’s perspective. This means the AMD trails by roughly 16% in this older rendering test.
Moving to Cinebench R20, the multicore results show the Intel at 1601 and the AMD at 1347, again a -15.9% delta. The single-core R20 test shows the Intel at 225 and the AMD at 190, with a -15.6% delta. The similarity between single-core and multi-core deltas suggests that the Intel’s advantage is not dependent on thread scaling.
The Cinebench R23 results reinforce this pattern. In multicore, the Intel scores 3814 versus 3208 for the AMD, a -15.9% delta. In single-core, the Intel scores 538 versus 453, a -15.8% delta. Across all five tests, the deltas range from -15.6% to -15.9%, a spread of just 0.3 percentage points. This uniformity indicates that the Intel processor’s architectural efficiency advantage applies equally across single-threaded and multi-threaded workloads.
The aggregate average benchmark scores are nearly identical, with the AMD at 1104 and the Intel at 1103. The nearest rival data confirms this proximity: the Intel Xeon E5-2603 v3 sits at 1103, just 0.1% below the AMD and exactly equal to the Intel. The AMD Athlon X4 845 scores 1106, 0.2% above the AMD, and the AMD Opteron 3280 also scores 1106. The Intel Pentium Gold G6500, a close relative of the G6605, scores 1101.
The Verdict
The data points to a straightforward conclusion: the Intel Pentium Gold G6605 outperforms the AMD PRO A12-9800 in every measured benchmark. The Intel part wins all five head-to-head tests with margins consistently near 16%. This advantage appears in both single-core and multi-core workloads, indicating a fundamental per-thread performance lead rather than a scaling artifact.
For users prioritizing raw rendering performance in Cinebench workloads, the Intel Pentium Gold G6605 is the better choice. Its 4.30 GHz base clock and 4 MB of shared L3 cache appear to deliver superior results despite having only 2 physical cores. The Intel part also offers higher memory bandwidth at 42.7 GB/s and double the PCIe lanes at 16 versus 8.
The AMD PRO A12-9800 does retain some advantages that are not captured in these benchmarks. It has 4 physical cores, which may benefit workloads that are sensitive to physical core count rather than thread count. It also uses the AM4 socket, which may offer a different upgrade path. However, based strictly on the benchmark data, the AMD part trails the Intel in all measured tests.
The aggregate scores being nearly identical — 1104 versus 1103 — means that in a broader benchmark suite, these processors would likely trade positions depending on workload mix. But for the Cinebench family of tests, which are representative of rendering and multi-threaded content creation, the Intel Pentium Gold G6605 is consistently ahead.
FAQ
Q: Which processor has more physical cores?
A: The AMD PRO A12-9800 has 4 physical cores and 4 threads. The Intel Pentium Gold G6605 has 2 physical cores and 4 threads.
Q: Does the Intel Pentium Gold G6605 win any benchmarks against the AMD PRO A12-9800?
A: Yes, the Intel part wins all five head-to-head benchmarks, including Cinebench R15 multicore, R20 multicore, R20 single-core, R23 multicore, and R23 single-core.
Q: How large is the performance gap between these two processors?
A: The Intel Pentium Gold G6605 leads by margins between 15.6% and 15.9% across all five head-to-head tests. The deltas are -15.9% in R15 multicore, -15.9% in R20 multicore, -15.6% in R20 single-core, -15.9% in R23 multicore, and -15.8% in R23 single-core.
Q: What are the clock speeds of these processors?
A: The AMD PRO A12-9800 has a base clock of 3.80 GHz and a boost clock of 4.20 GHz. The Intel Pentium Gold G6605 has a base clock of 4.30 GHz with no boost clock listed.
Q: Do both processors support ECC memory?
A: No. Both the AMD PRO A12-9800 and the Intel Pentium Gold G6605 have ECC memory support listed as false.
Q: How do their memory bandwidth figures compare?
A: The Intel Pentium Gold G6605 offers 42.7 GB/s of memory bandwidth, while the AMD PRO A12-9800 offers 38.4 GB/s. Both use dual-channel DDR4 memory.