AMD Phenom II X6 1075T vs Intel Pentium G4560 Comparison
AMD Phenom II X6 1075T
Pentium G4560
PERFORMANCE BENCHMARKS
Analysis: AMD Phenom II X6 1075T vs Intel Pentium G4560
The Intel Pentium G4560 and AMD Phenom II X6 1075T occupy the same performance percentile (28th) and have nearly identical average benchmark scores, yet they represent fundamentally different design philosophies separated by over six years of silicon evolution. The data shows a razor-thin but consistent victory for the Pentium G4560 across every single benchmark in the comparison, with the largest margin being a mere 0.7% in multi-core tests. This outcome is remarkable given that the Phenom II X6 offers three times the physical cores, highlighting how architectural efficiency and modern process technology can overcome raw core-count disadvantages.
The Verdict
The benchmark results indicate that the Intel Pentium G4560 is the superior processor in every measured workload, though the margins are so narrow that the choice largely depends on platform priorities rather than raw performance. For users prioritizing modern platform features, lower power consumption, and integrated graphics, the Pentium G4560 is the clear winner — it delivers a 0.7% advantage in Cinebench R15 multi-core (301 vs 299) and an identical 0.7% edge in Cinebench R20 multi-core (1258 vs 1249), while consuming less than half the power (51W TDP vs 125W). The Pentium also wins single-core tests by 0.6-0.7%, with Cinebench R23 single-core showing 423 vs 420.
However, the AMD Phenom II X6 1075T remains a compelling option for users with legacy AM3 motherboards, DDR2 or DDR3 memory, and workloads that might benefit from its six physical cores despite the benchmark parity. The data shows the Phenom II is essentially performance-equivalent, with its average benchmark score of 1024 sitting just 0.7% below the Pentium's 1031. The Phenom II also offers ECC memory support, which the Pentium lacks, and its 6 MB of shared L3 cache is double the Pentium's 3 MB. Given that the Phenom II is end-of-life and the Pentium is still active, the practical recommendation is for new builds to choose the Pentium G4560, while the Phenom II makes sense only for those already invested in the AM3 platform.
Architecture Differences
The two processors represent vastly different eras of CPU design. The Intel Pentium G4560 is built on a 14 nm process by Intel, while the AMD Phenom II X6 1075T uses a 45 nm process from GlobalFoundries. This process gap explains the dramatic power efficiency difference: the Pentium has a 51W TDP compared to the Phenom II's 125W TDP, despite the Phenom II having more cores.
The core configurations diverge significantly. The Pentium G4560 has 2 cores and 4 threads with Hyper-Threading, running at a base clock of 3.50 GHz. The Phenom II X6 1075T has 6 physical cores and 6 threads, with a base clock of 3.00 GHz and a boost clock of 3.50 GHz. The Phenom II's 904 million transistors on a 346 mm² die size reflect its older, less dense architecture, while the Pentium's modern Kaby Lake design achieves competitive performance with far fewer resources.
Cache hierarchies also differ markedly. The Pentium provides 64 KB of L1 and 256 KB of L2 per core, plus 3 MB of shared L3 cache. The Phenom II offers 128 KB of L1 and 512 KB of L2 per core, along with 6 MB of shared L3 cache. This means the Phenom II has more cache per core and double the total L3, yet the Pentium still matches or slightly exceeds its performance, underscoring the efficiency of the newer architecture.
Platform support is another major differentiator. The Pentium uses the Intel Socket 1151 interface with PCIe Gen 3 (16 lanes from the CPU), while the Phenom II uses the AMD Socket AM3 with PCIe Gen 2. The Pentium supports DDR4 memory with 38.4 GB/s bandwidth, whereas the Phenom II supports DDR2 and DDR3 with only 21.3 GB/s bandwidth. The Pentium includes Intel HD 610 integrated graphics, while the Phenom II relies on chipset-integrated graphics on certain motherboards. The Pentium does not support ECC memory, but the Phenom II does. These platform differences are arguably more significant than the raw performance gap, as they dictate which motherboards, memory types, and expansion cards can be used.
Head-to-Head Benchmarks
The head-to-head results show a remarkably consistent pattern of narrow Intel victories. Across all five Cinebench tests, the Pentium G4560 wins by margins ranging from 0.6% to 0.7%. The largest relative advantage appears in the multi-core tests, where the Pentium scores 301 vs 299 in Cinebench R15 (0.7% delta) and 1258 vs 1249 in Cinebench R20 (0.7% delta). This is particularly noteworthy because the Phenom II has three times the physical cores, suggesting that the Pentium's architectural efficiency and higher base clock compensate for its core deficit.
In single-core performance, the Pentium maintains its edge, though the margins are slightly smaller. Cinebench R20 single-core shows 177 vs 176 (0.6% delta), and Cinebench R23 single-core shows 423 vs 420 (0.7% delta). These single-core results are expected given the Pentium's 3.50 GHz base clock versus the Phenom II's 3.00 GHz base clock (though the Phenom II boosts to 3.50 GHz, the data does not indicate how sustained boost performance compares).
The overall average benchmark scores reinforce this picture. The Pentium G4560 has an average benchmark score of 1031, while the Phenom II X6 1075T scores 1024, a difference of 0.7%. Both processors sit at the 28th percentile of all CPUs, meaning they are performance peers in the broader market context. The nearest rivals for each processor further contextualize their standing: the Pentium's closest competitor is the AMD A10-9700 with a score of 1034 (0.3% ahead), while the Phenom II's closest is the Intel Processor N150 at 1025 (0.1% ahead). These rival scores are so close that they fall within what would typically be considered benchmark noise, yet the consistent direction of the Pentium's wins across all tests suggests a genuine, if small, performance advantage.
FAQ
Q: Which processor has better multi-core performance?
A: The Intel Pentium G4560 wins all multi-core tests, though by narrow margins. In Cinebench R15 multi-core, it scores 301 vs 299 (0.7% ahead), and in Cinebench R23 multi-core, it scores 2996 vs 2975 (0.7% ahead). This is despite the AMD Phenom II X6 1075T having 6 physical cores versus the Pentium's 2 cores with 4 threads.
Q: What is the power consumption difference?
A: The Intel Pentium G4560 has a 51W TDP, while the AMD Phenom II X6 1075T has a 125W TDP. This means the Pentium consumes less than half the power of the Phenom II, making it significantly more energy-efficient for desktop builds.
Q: Do these processors support the same memory types?
A: No. The Intel Pentium G4560 supports DDR4 memory with 38.4 GB/s bandwidth, while the AMD Phenom II X6 1075T supports DDR2 and DDR3 memory with 21.3 GB/s bandwidth. The Pentium's memory bandwidth is approximately 80% higher than the Phenom II's.
Q: Which processor has integrated graphics?
A: The Intel Pentium G4560 includes Intel HD 610 integrated graphics. The AMD Phenom II X6 1075T does not have integrated graphics on the CPU die; instead, it relies on chipset-integrated graphics available on certain motherboards.
Q: What is the production status of each processor?
A: The Intel Pentium G4560 is marked as "Active" in production, while the AMD Phenom II X6 1075T is marked as "End-of-life." This suggests the Pentium is still available for new systems, whereas the Phenom II is obsolete.
Q: Which processor supports ECC memory?
A: The AMD Phenom II X6 1075T supports ECC memory, while the Intel Pentium G4560 does not. This makes the Phenom II a potential option for users requiring error-correcting memory, despite its older platform.
Where Each One Wins
The Intel Pentium G4560 wins in every benchmark category included in the comparison, but its advantages extend beyond raw scores. The Pentium's active production status makes it a viable choice for new builds, whereas the Phenom II's end-of-life status limits its appeal to legacy system upgrades. The Pentium's 51W TDP versus the Phenom II's 125W TDP makes it the clear winner for power-constrained or compact systems, and its DDR4 support with 38.4 GB/s bandwidth provides a modern memory ecosystem advantage over the Phenom II's DDR2/DDR3 with 21.3 GB/s. The integrated Intel HD 610 graphics eliminate the need for a discrete GPU in basic systems, whereas the Phenom II's chipset-dependent graphics are less integrated and less capable. The Pentium also benefits from PCIe Gen 3 support, which offers double the bandwidth of the Phenom II's PCIe Gen 2.
The AMD Phenom II X6 1075T wins in specific legacy scenarios. Its 6 MB of shared L3 cache is double the Pentium's 3 MB, which could benefit workloads with high cache locality, though the benchmark data does not show a measured advantage. The Phenom II's ECC memory support is a genuine feature absent from the Pentium, making it relevant for users who require error correction. The Phenom II also supports both DDR2 and DDR3 memory, providing flexibility for users with existing RAM modules from the AM3 era. Its 6 physical cores, while not translating to benchmark wins in Cinebench, might offer better responsiveness in highly threaded legacy applications that are not reflected in the tested workloads. For users with existing AM3 motherboards, the Phenom II represents a drop-in upgrade path without changing platforms, whereas adopting the Pentium requires a new Socket 1151 motherboard.
The data ultimately shows a performance tie within 0.7%, with the modern platform features of the Pentium G4560 making it the more future-proof and efficient choice. The Phenom II X6 1075T remains a viable option only for those locked into the AM3 ecosystem or requiring ECC memory and legacy DDR2/DDR3 support.