AMD Phenom II X6 1075T vs Intel Core i3-4330 Comparison

AMD
AMD

AMD Phenom II X6 1075T

CORE STATE Thuban
CORE SPECS 6 Cores / 6 Threads
CLOCK SPEED 3 Base / 3.5 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 125W
ARCHITECTURE K10
nm
PROCESS 45 nm
LAUNCH DATE 2010
VS
Intel
INTEL

Core i3-4330

CORE STATE Haswell
CORE SPECS 2 Cores / 4 Threads
CLOCK SPEED 3.5 Base
CACHE 4 MB (shared)
MAX TDP 54W
ARCHITECTURE Haswell
nm
PROCESS 22 nm
LAUNCH DATE 2013

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
299
298
cinebench_cinebench_r20_multicore
1,249
1,245
cinebench_cinebench_r20_singlecore
176
175
cinebench_cinebench_r23_multicore
2,975
2,966
cinebench_cinebench_r23_singlecore
420
418

Analysis: AMD Phenom II X6 1075T vs Intel Core i3-4330

Where Each One Wins

The benchmark data presents an unusually one-sided picture. Across all five Cinebench tests, the AMD Phenom II X6 1075T wins every single comparison, though by margins that are almost negligible. The largest advantage appears in Cinebench R20 single-core, where the AMD part leads by 0.6%. The other four tests — Cinebench R15 multi-core, R20 multi-core, R23 multi-core, and R23 single-core — all show the AMD processor ahead by 0.3% or 0.5%. This means the Intel Core i3-4330, despite its newer architecture and higher base clock, cannot secure a single benchmark victory.

The practical implication is that these two processors are effectively tied in raw compute performance. The AMD Phenom II X6 1075T's wins are so narrow that they fall within typical run-to-run variance for most workloads. The win count of 5 to 0 in favor of AMD is technically decisive, but the actual deltas tell a story of near-parity. For single-threaded tasks, the Intel part's 3.50 GHz base clock versus AMD's 3.00 GHz base clock does not translate into a measurable advantage — the AMD chip's 3.50 GHz boost clock closes that gap entirely.

For multi-threaded workloads, one might expect the AMD Phenom II X6 1075T's six cores to overpower the Intel Core i3-4330's two cores with four threads. Yet the Cinebench multi-core results show only a 0.3% difference. This suggests that the Intel part's architectural efficiency per core compensates for its core-count disadvantage. The data does not support a scenario where either processor is clearly superior for a specific use case; instead, the benchmarks indicate that users should base their choice on platform considerations rather than raw performance.

Architecture Differences

The architectural gap between these two processors spans multiple generations and fundamentally different design philosophies. The AMD Phenom II X6 1075T uses the K10 architecture on the Thuban codename, built on a 45 nm process by GlobalFoundries. It packs 904 million transistors into a 346 mm² die. The Intel Core i3-4330 employs the Haswell architecture, fabricated on Intel's 22 nm process with 1,400 million transistors in a much smaller 177 mm² die. This density difference reflects the three-year gap between their releases — the AMD part launched in September 2010, while the Intel part arrived in August 2013.

Core configuration differs starkly. The AMD processor offers six physical cores with six threads, each core carrying 128 KB of L1 cache and 512 KB of L2 cache, plus a shared 6 MB L3 cache. The Intel processor provides two physical cores with four threads via Hyper-Threading, each core with 64 KB of L1 and 256 KB of L2, and a shared 4 MB L3 cache. The AMD chip's larger per-core caches and triple the core count contrast with Intel's smaller, more efficient cores.

Memory support also diverges. The AMD Phenom II X6 1075T supports both DDR2 and DDR3 memory in a dual-channel configuration with a rated bandwidth of 21.3 GB/s, and it supports ECC memory. The Intel Core i3-4330 supports only DDR3, also dual-channel, but its memory bandwidth figure is not provided in the data, and it lacks ECC support. Platform connectivity differs as well — AMD uses PCIe Gen 2, while Intel provides PCIe Gen 3.

Integrated graphics represents another key split. The AMD processor has no built-in graphics; any display output relies on a chipset feature available on certain motherboards. The Intel Core i3-4330 includes Intel HD 4600 integrated graphics, making it a more self-contained solution for systems without a discrete GPU. The AMD part's socket is AMD Socket AM3, while Intel uses Socket 1150. Neither processor has an unlocked multiplier, so overclocking headroom is limited on both sides.

Head-to-Head Benchmarks

Walking through the five Cinebench results reveals consistent but tiny AMD advantages. In Cinebench R15 multi-core, the AMD Phenom II X6 1075T scores 299 against the Intel Core i3-4330's 298, a 0.3% lead. Cinebench R20 multi-core shows a similar pattern: 1249 for AMD versus 1245 for Intel, again 0.3%. The single-core tests produce marginally larger spreads. In Cinebench R20 single-core, AMD scores 176 to Intel's 175, a 0.6% difference — the largest margin anywhere in the comparison. Cinebench R23 single-core gives AMD 420 versus Intel's 418, a 0.5% edge, while R23 multi-core lands at 2975 versus 2966, another 0.3% gap.

These numbers place both processors at the same 28th percentile among all CPUs in the database. The average benchmark scores reinforce the parity: the AMD part averages 1024, and the Intel part averages 1020. Looking at their nearest rivals, the AMD Phenom II X6 1075T sits exactly level with the AMD Ryzen 5 PRO 2500U at a 0% delta, and within 0.1% of the Intel Core i7-975 and 0.2% of the Intel Pentium Gold G5600. The Intel Core i3-4330 trails the Pentium Gold G5600 by 0.2%, the Ryzen 5 PRO 2500U by 0.3%, and the Core i7-975 by 0.3%, while leading the Intel Core i3-4160 by 0.3%. Both processors inhabit a performance tier where a single-digit point swing in any benchmark could flip the winner.

The most notable observation is that the Intel Core i3-4330's higher base clock of 3.50 GHz — versus AMD's 3.00 GHz base and 3.50 GHz boost — produces no single-core victory. The AMD part matches or slightly exceeds Intel in every single-threaded test. This outcome suggests that the K10 architecture's per-core performance, when clocked at 3.50 GHz, is competitive with Haswell at 3.50 GHz in these specific workloads. For multi-core tests, the AMD chip's six physical cores should theoretically provide a 50% core advantage, yet the measured difference is only 0.3%. The data implies that Cinebench's scaling across six K10 cores versus four Haswell threads is remarkably balanced.

FAQ

Q: Which processor wins more benchmarks in this comparison?

A: The AMD Phenom II X6 1075T wins all five head-to-head benchmarks, with a 5-to-0 win count. However, the largest margin is only 0.6%, so the victories are extremely narrow.

Q: How do the single-core performances compare?

A: The AMD Phenom II X6 1075T leads in both single-core tests. In Cinebench R20 single-core, it scores 176 versus Intel's 175 (0.6% ahead), and in R23 single-core, it scores 420 versus 418 (0.5% ahead).

Q: Is there any benchmark where the Intel Core i3-4330 comes out ahead?

A: No. The Intel Core i3-4330 does not win any of the five tested benchmarks. Its best result is a near-tie in Cinebench R15 multi-core, where it scores 298 against AMD's 299.

Q: What is the core and thread difference between these two chips?

A: The AMD Phenom II X6 1075T has 6 cores and 6 threads, while the Intel Core i3-4330 has 2 cores and 4 threads. Despite this, their multi-core benchmark scores are within 0.3% of each other.

Q: Do both processors support the same memory types?

A: No. The AMD processor supports both DDR2 and DDR3 memory with ECC capability, while the Intel processor supports only DDR3 without ECC support.

Q: Which processor has integrated graphics?

A: The Intel Core i3-4330 includes Intel HD 4600 integrated graphics. The AMD Phenom II X6 1075T does not have integrated graphics, relying instead on a chipset feature available on certain motherboards.

The Verdict

The benchmark data points to a clear conclusion: these two processors are performance equivalents in the tested workloads, with the AMD Phenom II X6 1075T holding a nominal edge. Users prioritizing raw compute performance should note that the AMD chip wins every benchmark, but the margins are so small that real-world differences will be imperceptible. The AMD part's advantages lie in its six physical cores and larger cache hierarchy, which may benefit workloads that scale beyond four threads, even if Cinebench does not show a significant gap.

The Intel Core i3-4330 offers its own set of advantages that are not reflected in the benchmark scores. It includes integrated graphics, eliminating the need for a separate GPU in basic systems. It uses a newer 22 nm process, resulting in a lower 54 W TDP versus AMD's 125 W TDP — a meaningful difference for power-constrained builds. The Intel part also supports PCIe Gen 3, which may matter for modern expansion cards. Its smaller die size and higher transistor count suggest better manufacturing efficiency.

For users building a system from scratch, the choice depends on platform needs. Those who need integrated graphics, lower power consumption, or PCIe Gen 3 support should favor the Intel Core i3-4330. Those who already own an AM3 motherboard, require ECC memory support, or want six physical cores for legacy multi-threaded software should consider the AMD Phenom II X6 1075T. The performance data does not favor either processor in a meaningful way, so platform compatibility and feature requirements should drive the decision.

Specification Differences

| Specification | AMD Phenom II X6 1075T | Intel Core i3-4330 |

|---|---|---|

| Cores | 6 | 2 |

| Threads | 6 | 4 |

| Base Clock | 3.00 GHz | 3.50 GHz |

| Boost Clock | 3.50 GHz | None |

| TDP | 125 W | 54 W |

| Socket | AMD Socket AM3 | Intel Socket 1150 |

| Architecture | K10 | Haswell |

| Codename | Thuban | Haswell |

| Process Node | 45 nm | 22 nm |

| Foundry | GlobalFoundries | Intel |

| Transistors | 904 million | 1,400 million |

| Die Size | 346 mm² | 177 mm² |

| L1 Cache | 128 KB per core | 64 KB per core |

| L2 Cache | 512 KB per core | 256 KB per core |

| L3 Cache | 6 MB shared | 4 MB shared |

| Memory Support | DDR2, DDR3 | DDR3 |

| Memory Bandwidth | 21.3 GB/s | Not specified |

| ECC Memory | Yes | No |

| PCIe | Gen 2 | Gen 3 |

| Integrated Graphics | Chipset feature | Intel HD 4600 |

| Release Date | 2010-09-20 | 2013-08-31 |

| Part Number | HDT75TFBK6DGRHDT75TFBGRBOX | SR1NM |

DETAILED SPECIFICATIONS

SPECIFICATION
Phenom II X6 1075T
i3-4330
Core Specs
Cores
6
2 -66.7%
Threads
6
4 -33.3%
Base Clock (GHz)
3
3.5 +16.7%
Boost Clock (GHz)
3.5
—
Frequency (GHz)
3
3.5 +16.7%
Turbo Clock (GHz)
3.5
—
Multiplier
15
35 +133.3%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
128 KB (per core)
64 KB (per core)
L2 Cache
512 KB (per core)
256 KB (per core)
L3 Cache
6 MB (shared)
4 MB (shared)
Power
TDP (W)
125
54 -56.8%
Architecture
Architecture
K10
Haswell
Codename
Thuban
Haswell
Generation
Phenom II X6 (Thuban)
Core i3 (Haswell)
Process Size
45 nm
22 nm
Transistors
904 million
1,400 million
Die Size
346 mm²
177 mm²
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR2, DDR3
DDR3
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
21.3 GB/s
—
ECC Memory
Yes
No
Platform
Socket
AMD Socket AM3
Intel Socket 1150
Chipsets
AMD 700 Series, AMD 800 Series, AMD 900 Series, nForce 630a, nForce 700a, nForce 900a
—
PCIe
Gen 2
Gen 3
Graphics
Integrated Graphics
On certain motherboards (Chipset feature)
Intel HD 4600
Other
Market
Desktop
Desktop
Production Status
End-of-life
—
Part Number
HDT75TFBK6DGRHDT75TFBGRBOX
SR1NM
Package
µPGA
FC-LGA12C
View Phenom II X6 1075T Details View Core i3-4330 Details