AMD Phenom II X6 1065T vs Intel Xeon W3565 Comparison
AMD Phenom II X6 1065T
Xeon W3565
PERFORMANCE BENCHMARKS
Analysis: AMD Phenom II X6 1065T vs Intel Xeon W3565
Where Each One Wins
The recorded benchmark data presents an unusual outcome: the Intel Xeon W3565 and AMD Phenom II X6 1065T produce identical scores across every tested workload. The database shows five head-to-head comparisons, and the Xeon W3565 is listed as the winner in all five, but each result carries a delta of 0%. That means neither processor actually outperforms the other in any measured test. The wins column for the Xeon is 5, and the Phenom has 0, yet the underlying scores are the same for both chips in every single case.
For multicore rendering, both CPUs score 290 in Cinebench R15 multicore, 1212 in Cinebench R20 multicore, and 2888 in Cinebench R23 multicore. For single-core workloads, both hit 170 in Cinebench R20 single-core and 407 in Cinebench R23 single-core. The average benchmark score for each processor is 993. Their percentile ranking against all CPUs in the database is identical at 27. There is no workload category where one chip pulls ahead, no rendering task where one finishes faster, and no single-threaded test where one shows an edge.
What this means in practical terms is that the Xeon W3565 and Phenom II X6 1065T are effectively interchangeable in the benchmarks the database covers. The Xeon wins the nominal head-to-head count only because the database assigns the win to the first listed item when scores tie. The data does not support a claim that either processor is better for a specific use case. For threaded workloads, both deliver the same Cinebench multicore numbers. For lightly threaded tasks, both deliver the same single-core numbers. The conclusion is straightforward: neither chip has a measurable advantage in the recorded tests.
Architecture Differences
The two processors come from different architectural lineages, and those differences show up in how they are built even though their benchmark results match. The Intel Xeon W3565 uses the Nehalem architecture with the Bloomfield codename, built on a 45 nm process at Intel's foundry. It packs 731 million transistors into a 263 mm² die. The AMD Phenom II X6 1065T uses the K10 architecture with the Thuban codename, also on a 45 nm process, but fabricated by GlobalFoundries. It contains 904 million transistors spread across a larger 346 mm² die. The AMD chip has more transistors and a larger physical footprint, yet the performance outcome is identical in the recorded tests.
Core and thread counts differ meaningfully. The Xeon W3565 has 4 cores and 8 threads, relying on simultaneous multithreading to reach its thread count. The Phenom II X6 1065T has 6 physical cores and 6 threads, with no multithreading. The Xeon compensates for fewer physical cores with hyperthreading, while the Phenom uses additional physical cores. The benchmark data shows that both approaches land on the same scores.
Cache hierarchies also diverge. The Xeon W3565 has 64 KB of L1 cache per core, 256 KB of L2 cache per core, and 8 MB of shared L3 cache. The Phenom II X6 1065T has 128 KB of L1 per core, 512 KB of L2 per core, and 6 MB of shared L3 cache. The AMD part provides larger per-core L1 and L2 caches but a smaller L3 pool. The Intel part offers a larger shared L3 cache but smaller per-core caches. Despite these structural differences, the measured performance is the same.
Memory support sets them apart as well. The Xeon W3565 supports DDR3 memory over a triple-channel memory bus. The Phenom II X6 1065T supports both DDR2 and DDR3 over a dual-channel memory bus, with a listed memory bandwidth of 21.3 GB/s. The Xeon does not have a memory bandwidth figure in the database, but the triple-channel configuration implies a wider path to memory. Both CPUs support ECC memory. Both use PCIe Gen 2. The Xeon has no integrated graphics. The Phenom lists integrated graphics as available on certain motherboards as a chipset feature.
Clock speeds favor the Intel part. The Xeon W3565 runs at a base clock of 3.20 GHz with a boost clock of 3.47 GHz. The Phenom II X6 1065T runs at 2.90 GHz base and 3.40 GHz boost. The Xeon is higher in both base and boost clocks, but the Phenom compensates with two extra physical cores. The net result in the database is a dead heat.
The market segments differ. The Xeon W3565 is a Server/Workstation processor on Intel Socket 1366. The Phenom II X6 1065T is a Desktop processor on AMD Socket AM3. The Xeon belongs to the Xeon (Bloomfield) generation, while the Phenom belongs to the Phenom II X6 (Thuban) generation. The Xeon's part number is SLBEV. The Phenom's part number is HDT65TWFK6DGRHDT65TWFRBOX. Neither processor has a multiplier unlocked. Both are end-of-life products. The Xeon was released on 2009-10-31, and the Phenom followed on 2010-12-06.
Head-to-Head Benchmarks
The head-to-head results in the database show complete parity. In Cinebench R15 multicore, the Xeon W3565 scores 290 and the Phenom II X6 1065T scores 290. The delta is 0%. In Cinebench R20 multicore, both score 1212. In Cinebench R20 single-core, both score 170. In Cinebench R23 multicore, both score 2888. In Cinebench R23 single-core, both score 407. Every single comparison ends in a tie.
The nearest rival data reinforces this picture. The Xeon W3565 lists the Phenom II X6 1065T as a rival with an average score of 993 and a delta of 0%. The Phenom II X6 1065T lists the Xeon W3565 as a rival with the same average score of 993 and the same delta of 0%. Both chips also tie with the Intel Core i7-965 and Intel Core i7-960, each of which has an average score of 993. The only rival with any delta is the Intel Core i3-8130U, which scores 994 and shows a delta of -0.1% relative to both processors, meaning the i3 is marginally ahead on average.
The largest single difference in the entire comparison is that -0.1% delta against the Core i3-8130U, and it applies equally to both the Xeon and the Phenom. There is no test where one of these two CPUs beats the other by any margin. The database records the Xeon as the winner in all five head-to-head tests, but that designation comes from the order of comparison, not from any actual performance advantage.
For users looking at raw numbers, the takeaway is that Cinebench scores are identical across all versions tested. Multicore scaling from R15 to R20 to R23 shows both processors rising together from 290 to 1212 to 2888. Single-core scaling from R20 to R23 shows both rising from 170 to 407. The ratio of improvement is the same for both chips, which reinforces the idea that their architectural differences do not translate into measurable performance differences in these workloads.
FAQ
Q: Which processor has more cores?
A: The AMD Phenom II X6 1065T has 6 cores and 6 threads. The Intel Xeon W3565 has 4 cores and 8 threads.
Q: Do the two CPUs differ in benchmark performance?
A: No. Every recorded benchmark score is identical. Both score 290 in Cinebench R15 multicore, 1212 in Cinebench R20 multicore, 170 in Cinebench R20 single-core, 2888 in Cinebench R23 multicore, and 407 in Cinebench R23 single-core. Their average benchmark score is 993 for both.
Q: What is the clock speed difference?
A: The Xeon W3565 has a base clock of 3.20 GHz and a boost clock of 3.47 GHz. The Phenom II X6 1065T has a base clock of 2.90 GHz and a boost clock of 3.40 GHz. The Xeon is faster in both measures.
Q: Which CPU has a larger cache?
A: The Xeon W3565 has 8 MB of shared L3 cache, while the Phenom II X6 1065T has 6 MB of shared L3 cache. The Phenom has larger per-core L1 and L2 caches (128 KB and 512 KB per core) compared to the Xeon (64 KB and 256 KB per core).
Q: Do both processors support ECC memory?
A: Yes, both the Xeon W3565 and the Phenom II X6 1065T support ECC memory.
Q: Which processor has a higher average benchmark score?
A: Neither. Both have an average benchmark score of 993, and both sit at the 27th percentile among all CPUs in the database.
Specification Differences
The following specifications differ between the Intel Xeon W3565 and the AMD Phenom II X6 1065T:
- Manufacturer: Intel versus AMD
- Cores: 4 versus 6
- Threads: 8 versus 6
- Base clock: 3.20 GHz versus 2.90 GHz
- Boost clock: 3.47 GHz versus 3.40 GHz
- TDP: 130 W versus 125 W
- Socket: Intel Socket 1366 versus AMD Socket AM3
- Architecture: Nehalem versus K10
- Codename: Bloomfield versus Thuban
- Generation: Xeon (Bloomfield) versus Phenom II X6 (Thuban)
- Foundry: Intel versus GlobalFoundries
- Transistors: 731 million versus 904 million
- Die size: 263 mm² versus 346 mm²
- L1 cache: 64 KB per core versus 128 KB per core
- L2 cache: 256 KB per core versus 512 KB per core
- L3 cache: 8 MB shared versus 6 MB shared
- Memory support: DDR3 versus DDR2, DDR3
- Memory bus: Triple-channel versus Dual-channel
- Memory bandwidth: Not listed versus 21.3 GB/s
- Integrated graphics: None versus On certain motherboards (Chipset feature)
- Market segment: Server/Workstation versus Desktop
- Release date: 2009-10-31 versus 2010-12-06
- Part number: SLBEV versus HDT65TWFK6DGRHDT65TWFRBOX
Fields that are the same include process node (45 nm), ECC memory support (both true), PCIe generation (Gen 2 for both), production status (end-of-life for both), multiplier unlock status (false for both), and launch MSRP (not listed for either).
The Verdict
The benchmark data makes one point clear: there is no measurable performance difference between the Intel Xeon W3565 and the AMD Phenom II X6 1065T in the workloads recorded. Every Cinebench score, from R15 to R23, single-core and multicore, is identical. The average benchmark score is 993 for both. The percentile rank is 27 for both. The nearest rival lists are the same, with the same rival scores and the same deltas. The Xeon has a higher clock speed, but the Phenom has more physical cores. Those factors cancel out in the database.
The decision between the two should rest on platform and feature preferences, not on performance. The Xeon W3565 is a server and workstation part on Intel Socket 1366 with triple-channel DDR3 memory support. The Phenom II X6 1065T is a desktop part on AMD Socket AM3 with dual-channel memory support for both DDR2 and DDR3. The Xeon offers a higher boost clock of 3.47 GHz and a larger shared L3 cache of 8 MB. The Phenom offers two additional physical cores, larger per-core caches, and a lower TDP of 125 W compared to 130 W.
For users building or upgrading a system around an existing Intel 1366 motherboard, the Xeon W3565 is the matching choice. For users with an AMD AM3 platform, the Phenom II X6 1065T fits that socket. The data shows that neither processor will outperform the other in rendering or single-threaded tasks. The Xeon wins the nominal head-to-head count, but only because the database defaults to the first item in tied comparisons. The real conclusion from the recorded measurements is that these two CPUs deliver identical performance, and the selection should be made on socket compatibility, memory channel preference, and platform availability. Both are end-of-life products, so availability in the current market will likely factor into any decision. The benchmark results do not favor one over the other.