AMD Phenom II X6 1065T vs Intel Core i7-960 Comparison

AMD
AMD

AMD Phenom II X6 1065T

CORE STATE Thuban
CORE SPECS 6 Cores / 6 Threads
CLOCK SPEED 2.9 Base / 3.4 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 125W
ARCHITECTURE K10
nm
PROCESS 45 nm
LAUNCH DATE 2010
VS
Intel
INTEL

Core i7-960

CORE STATE Bloomfield
CORE SPECS 4 Cores / 8 Threads
CLOCK SPEED 3.2 Base / 3.47 GHz Turbo
CACHE 8 MB (shared)
MAX TDP 130W
ARCHITECTURE Nehalem
nm
PROCESS 45 nm
LAUNCH DATE 2009

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
290
290
cinebench_cinebench_r20_multicore
1,212
1,211
cinebench_cinebench_r20_singlecore
170
170
cinebench_cinebench_r23_multicore
2,888
2,885
cinebench_cinebench_r23_singlecore
407
407

Analysis: AMD Phenom II X6 1065T vs Intel Core i7-960

The AMD Phenom II X6 1065T and the Intel Core i7-960 are two end-of-life desktop processors that, despite their different architectures and core configurations, land on exactly the same average benchmark score of 993. Both sit at the 27th percentile of all CPUs, and their nearest rival lists are nearly identical, including each other, the Intel Core i7-965, and the Intel Xeon W3565, all with a deltaPct of 0. The data paints a picture of two chips that are statistical equals in the Cinebench suite, yet they achieve that parity through fundamentally different design philosophies—one using six physical cores, the other using four cores with Hyper-Threading.

Where Each One Wins

The head-to-head benchmark results are remarkably one-sided in declared wins, with the AMD Phenom II X6 1065T taking all five tests, but the actual score differences are negligible. In the Cinebench R15 multicore test, both processors score exactly 290, a perfect tie. The R20 multicore test shows the AMD chip ahead by a single point, 1212 versus 1211, a deltaPct of just 0.1%. The R23 multicore test repeats this pattern, with AMD at 2888 and Intel at 2885, again a 0.1% advantage. The single-core tests are dead even: both score 170 in Cinebench R20 single-core and 407 in Cinebench R23 single-core.

The practical takeaway is that the AMD Phenom II X6 1065T wins on paper in every benchmark, but the margins are so thin they fall within noise. The Intel Core i7-960 does not win a single benchmark, yet it also does not lose by any meaningful margin. The real story is not about which chip is faster—it is about how two very different designs converge on the same performance level. The AMD chip’s advantage, such as it is, comes entirely from its extra two physical cores, which help it edge ahead in multi-threaded workloads like Cinebench R23 multicore, while the Intel chip’s higher base and boost clocks—3.20 GHz and 3.47 GHz versus 2.90 GHz and 3.40 GHz—keep it competitive in single-threaded tasks, where the scores are identical.

Architecture Differences

The architectural divide between these two chips is stark. The AMD Phenom II X6 1065T uses the K10 architecture on the Thuban codename, built on a 45 nm process at GlobalFoundries with 904 million transistors on a 346 mm² die. It features six cores and six threads, each core with 128 KB of L1 cache and 512 KB of L2 cache, plus a shared 6 MB L3 cache. The Intel Core i7-960, in contrast, uses the Nehalem architecture on the Bloomfield codename, also on a 45 nm process but at Intel’s own foundry, with just 731 million transistors on a smaller 263 mm² die. It packs four cores and eight threads, with smaller per-core caches—64 KB of L1 and 256 KB of L2—but a larger 8 MB shared L3 cache.

Memory support further differentiates the two. The AMD chip supports both DDR2 and DDR3 memory in a dual-channel configuration, with a memory bandwidth of 21.3 GB/s, and it supports ECC memory. The Intel chip supports only DDR3, but in a triple-channel configuration, and does not support ECC memory. The memory bandwidth field for the Intel chip is null in the data, so no direct comparison can be made, but the triple-channel setup suggests a different approach to memory throughput. Both use PCIe Gen 2. The AMD chip’s integrated graphics are listed as “on certain motherboards (Chipset feature),” while the Intel chip has no integrated graphics listed at all, meaning any display output must come from a discrete GPU.

The manufacturing differences are notable: AMD’s chip is larger and has more transistors, yet both are 45 nm parts. The Intel chip’s smaller die and lower transistor count suggest a more efficient design per area, but the AMD chip compensates with raw core count. Neither chip has an unlocked multiplier, so overclocking is limited on both. The release dates differ by over a year, with the Intel chip launching in October 2009 and the AMD chip in December 2010.

FAQ

Q: Which processor has more physical cores?

A: The AMD Phenom II X6 1065T has six physical cores, while the Intel Core i7-960 has four physical cores. The Intel chip compensates with Hyper-Threading, giving it eight threads total versus the AMD chip’s six threads.

Q: Are the single-core performance scores identical?

A: Yes, in both Cinebench R20 single-core and R23 single-core, both processors score exactly 170 and 407, respectively. The head-to-head data shows a deltaPct of 0 for both tests.

Q: How do the multi-core scores compare?

A: The AMD chip wins all three multi-core tests, but by razor-thin margins. In Cinebench R15, both score 290. In R20, AMD scores 1212 versus Intel’s 1211, a 0.1% difference. In R23, AMD scores 2888 versus Intel’s 2885, again a 0.1% difference.

Q: Do both processors support the same memory types?

A: No. The AMD chip supports both DDR2 and DDR3 in dual-channel mode, while the Intel chip supports only DDR3 in triple-channel mode. The AMD chip also supports ECC memory, which the Intel chip does not.

Q: What is the average benchmark score for each processor?

A: Both processors have an identical average benchmark score of 993. They also share the same percentile ranking of 27 among all CPUs.

Q: Which processor has a larger L3 cache?

A: The Intel Core i7-960 has a larger shared L3 cache of 8 MB, while the AMD Phenom II X6 1065T has a shared 6 MB L3 cache. The Intel chip’s L1 and L2 caches are smaller per core, however.

Specification Differences

The two processors differ across nearly every core specification. The AMD Phenom II X6 1065T offers six cores and six threads, while the Intel Core i7-960 offers four cores and eight threads. Base clocks are 2.90 GHz for AMD and 3.20 GHz for Intel, with boost clocks of 3.40 GHz and 3.47 GHz, respectively. The TDP is 125 watts for AMD and 130 watts for Intel, a modest difference. Sockets are incompatible: AMD uses Socket AM3, while Intel uses Socket 1366.

The cache hierarchy diverges completely. AMD provides 128 KB of L1 and 512 KB of L2 per core, with 6 MB of shared L3. Intel provides 64 KB of L1 and 256 KB of L2 per core, with 8 MB of shared L3. The transistor counts differ significantly, with AMD at 904 million and Intel at 731 million, and die sizes are 346 mm² versus 263 mm². Memory support is another split: AMD handles DDR2 and DDR3 in dual-channel with ECC, while Intel handles only DDR3 in triple-channel without ECC. The AMD chip reports a memory bandwidth of 21.3 GB/s, while the Intel chip’s bandwidth is not listed. Both use PCIe Gen 2. The AMD chip has integrated graphics as a chipset feature on certain motherboards, while the Intel chip has none listed. Both are end-of-life parts with locked multipliers. The part numbers are HDT65TWFK6DGRHDT65TWFRBOX for AMD and SLBEU for Intel.

Head-to-Head Benchmarks

The Cinebench results tell a story of near-perfect parity. In Cinebench R15 multicore, the score is a flat 290 for both, with the AMD chip declared the winner only by default, as the deltaPct is 0. Moving to Cinebench R20 multicore, the AMD chip scores 1212 against the Intel chip’s 1211, a deltaPct of 0.1%. This is the largest winning margin for AMD in any test, and it is still just one point. The Cinebench R23 multicore test shows AMD at 2888 and Intel at 2885, again a 0.1% deltaPct. Single-core tests are exact ties: 170 in R20 and 407 in R23, both with a deltaPct of 0.

The pattern is clear: the AMD chip’s six cores give it a slight edge in multi-threaded rendering, but the Intel chip’s higher clocks—3.20 GHz base and 3.47 GHz boost versus 2.90 GHz and 3.40 GHz—nearly erase that advantage. The Intel chip’s eight threads, despite coming from only four cores, are enough to keep it within a point of the AMD chip in every multi-core test. The single-core parity suggests that per-clock performance is effectively identical, or that the benchmark’s resolution is too coarse to differentiate them. The data shows no scenario where the Intel chip wins, but also no scenario where it loses by more than 0.1%. The average benchmark scores reinforce this: both sit at 993, with the nearest rival list showing the Intel Core i7-965 and Intel Xeon W3565 also at 993, and the Intel Core i3-8130U at 994 with a -0.1% deltaPct.

The Verdict

The data suggests that the choice between these two processors comes down to platform features rather than performance. The AMD Phenom II X6 1065T wins all five head-to-head benchmarks, but its largest margin is 0.1%, which is effectively a tie. Users who prioritize ECC memory support and compatibility with both DDR2 and DDR3 memory would favor the AMD chip. Users who need triple-channel DDR3 memory bandwidth would favor the Intel chip, although the exact bandwidth is not listed. The Intel chip’s smaller die and lower transistor count might appeal to those interested in power efficiency per area, though both have similar TDPs at 125 and 130 watts.

The AMD chip’s extra two physical cores are its primary advantage, delivering a consistent, if tiny, lead in multi-threaded workloads. The Intel chip’s higher clocks keep it competitive in single-threaded tasks, where the scores are identical. Neither chip offers an unlocked multiplier, so overclocking is not a differentiator. With both processors at the 27th percentile and an average score of 993, the data indicates that any performance difference is negligible. The verdict is straightforward: the AMD chip is the nominal winner in benchmarks, but the Intel chip is not meaningfully slower. The deciding factors should be the memory and socket requirements of the rest of the system, not raw compute performance.

DETAILED SPECIFICATIONS

SPECIFICATION
Phenom II X6 1065T
i7-960
Core Specs
Cores
6
4 -33.3%
Threads
6
8 +33.3%
Base Clock (GHz)
2.9
3.2 +10.3%
Boost Clock (GHz)
3.4
3.47 +2.1%
Frequency (GHz)
2.9
3.2 +10.3%
Turbo Clock (GHz)
3.4
3.47 +2.1%
Multiplier
14.5
24 +65.5%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
128 KB (per core)
64 KB (per core)
L2 Cache
512 KB (per core)
256 KB (per core)
L3 Cache
6 MB (shared)
8 MB (shared)
Power
TDP (W)
125
130 +4.0%
Architecture
Architecture
K10
Nehalem
Codename
Thuban
Bloomfield
Generation
Phenom II X6 (Thuban)
Core i7 (Bloomfield)
Process Size
45 nm
45 nm
Transistors
904 million
731 million
Die Size
346 mm²
263 mm²
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR2, DDR3
DDR3
Memory Bus
Dual-channel
Triple-channel
Memory Bandwidth
21.3 GB/s
—
ECC Memory
Yes
No
Platform
Socket
AMD Socket AM3
Intel Socket 1366
Chipsets
AMD 700 Series, AMD 800 Series, AMD 900 Series, nForce 630a, nForce 700a, nForce 900a
—
PCIe
Gen 2
Gen 2
Graphics
Integrated Graphics
On certain motherboards (Chipset feature)
—
Other
Market
Desktop
Desktop
Production Status
End-of-life
End-of-life
Part Number
HDT65TWFK6DGRHDT65TWFRBOX
SLBEU
Package
µPGA
FC-LGA8
View Phenom II X6 1065T Details View Core i7-960 Details