AMD Phenom II X6 1045T vs Intel Core i3-8145U Comparison

AMD
AMD

AMD Phenom II X6 1045T

CORE STATE Thuban
CORE SPECS 6 Cores / 6 Threads
CLOCK SPEED 2.7 Base / 3.2 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 95W
ARCHITECTURE K10
nm
PROCESS 45 nm
LAUNCH DATE 2010
VS
Intel
INTEL

Core i3-8145U

CORE STATE Whiskey Lake-U
CORE SPECS 2 Cores / 4 Threads
CLOCK SPEED 2.1 Base / 3.9 GHz Turbo
CACHE 4 MB (shared)
MAX TDP 15W
ARCHITECTURE Whiskey Lake
nm
PROCESS 10 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
276
322
cinebench_cinebench_r20_multicore
1,154
1,342
cinebench_cinebench_r20_singlecore
162
189
cinebench_cinebench_r23_multicore
2,748
3,196
cinebench_cinebench_r23_singlecore
388
451
cinebench_cinebench_r15_singlecore
N/A
148.5

Analysis: AMD Phenom II X6 1045T vs Intel Core i3-8145U

The AMD Phenom II X6 1045T and Intel Core i3-8145U represent two distinct eras of processor design, separated by eight years of architectural evolution. Despite the Phenom’s six physical cores against the Core i3’s two, the benchmark data paints a consistent picture: the mobile Intel part wins every single head-to-head test. The most striking result is in Cinebench R23 multi-core, where the i3-8145U scores 3196 against the Phenom’s 2748, a 14% advantage. This is remarkable because the AMD chip has three times the core count, yet the newer Intel architecture’s efficiency overcomes that deficit entirely. The single-core results are even more decisive: the i3-8145U leads by 14% in both Cinebench R20 (189 vs 162) and R23 (451 vs 388), demonstrating a substantial per-thread performance lead that no amount of Phenom cores can compensate for.

Head-to-Head Benchmarks

The data shows a clean sweep for the Intel Core i3-8145U across all five shared benchmark tests, with the Phenom II X6 1045T failing to secure a single win. The narrowest margin is in Cinebench R15 multi-core, where the i3-8145U scores 322 against the Phenom’s 276 — a 14.3% gap. This older test still favors the Intel part, but the difference is less pronounced than in newer workloads, suggesting the Phenom’s six cores help it remain competitive in legacy multi-threaded scenarios. Moving to Cinebench R20 multi-core, the i3-8145U extends its lead to 1342 over 1154, again a 14% difference. The consistency of this 14% margin across R20 and R23 multi-core tests indicates a stable performance relationship that scales with workload generation.

The single-core results are where the architectural gap becomes undeniable. In Cinebench R20 single-core, the i3-8145U’s 189 points represent a 14.3% advantage over the Phenom’s 162. This pattern repeats in Cinebench R23 single-core with 451 versus 388, a 14% lead. What makes this particularly telling is that the Phenom’s boost clock of 3.20 GHz is not dramatically lower than the i3’s 3.90 GHz, yet the Intel part’s superior instructions-per-clock (IPC) from the Whiskey Lake architecture delivers a decisive per-thread win. For applications that rely on single-threaded performance — such as legacy software, web browsing, or lightly-threaded productivity tools — the i3-8145U is categorically faster. The overall average benchmark scores confirm the trend: the Phenom averages 946 points against the i3’s 941, a near-tie that obscures the fact that the i3 wins every specific test. Both processors sit at the 25th percentile of all CPUs, placing them in the lower tier of modern processors, but the i3 does so with significantly less power and newer technology.

Architecture Differences

The fundamental architectural chasm between these two processors explains the benchmark results. The Phenom II X6 1045T uses AMD’s K10 architecture on the Thuban codename, built on a 45 nm process at GlobalFoundries with 904 million transistors on a 346 mm² die. It features six physical cores with six threads, meaning no hyper-threading — each core handles one thread exclusively. The i3-8145U, by contrast, uses Intel’s Whiskey Lake architecture on a 10 nm process, with just two physical cores but four threads via hyper-threading. This core-count disadvantage is offset by the fact that each Intel core is significantly more powerful per clock, as evidenced by the single-core benchmark scores. The process node difference is stark: 45 nm versus 10 nm, which contributes to the i3’s dramatic efficiency advantage.

Cache hierarchies differ substantially. The Phenom offers 128 KB of L1 cache per core and 512 KB of L2 per core, totaling 6 MB of shared L3 cache. The i3-8145U has smaller per-core allocations — 64 KB L1 and 256 KB L2 — but compensates with a 4 MB shared L3. While the Phenom has more aggregate cache, the i3’s newer cache design and prefetching algorithms make its smaller pool more effective in practice. Memory support also diverges: the Phenom supports both DDR2 and DDR3 in dual-channel configuration, yielding 21.3 GB/s of memory bandwidth, while the i3 supports only DDR4 in dual-channel, achieving 38.4 GB/s — an 80% bandwidth advantage. This memory throughput difference is critical for multi-threaded workloads that saturate memory channels.

The i3-8145U also integrates UHD Graphics 620, whereas the Phenom relies on chipset-integrated graphics on certain motherboards. PCIe support differs as well: the Phenom uses Gen 2, while the i3 provides Gen 3 with 16 lanes (CPU only). The i3 supports ECC memory? No — the Phenom supports ECC, the i3 does not. The i3’s TDP of 15 watts versus the Phenom’s 95 watts encapsulates the efficiency revolution: the Intel part delivers higher performance while consuming less than one-sixth the power. Both processors are end-of-life, but the i3’s 2018 release date versus the Phenom’s 2010 debut explains why the newer part dominates despite fewer cores.

FAQ

Q: Which processor wins in multi-threaded workloads?

A: The Intel Core i3-8145U wins every multi-threaded test. In Cinebench R23 multi-core, it scores 3196 against the Phenom’s 2748, a 14% lead. Despite the Phenom having six cores versus the i3’s two, the i3’s higher IPC and memory bandwidth overcome the core deficit.

Q: How does single-core performance compare?

A: The i3-8145U leads by 14% in single-core tests. Cinebench R23 single-core shows 451 for the i3 versus 388 for the Phenom, and Cinebench R20 single-core shows 189 versus 162. This is the largest relative advantage in the head-to-head data.

Q: What are the core and thread counts?

A: The Phenom II X6 1045T has 6 cores and 6 threads, while the Core i3-8145U has 2 cores and 4 threads. The i3 uses hyper-threading to process two threads per core, while the Phenom processes one thread per core.

Q: What is the power consumption difference?

A: The Phenom has a TDP of 95 watts, while the i3-8145U has a TDP of 15 watts. This 80-watt difference means the i3 delivers superior performance at a fraction of the power draw, making it suitable for thin-and-light laptops whereas the Phenom requires desktop cooling.

Q: Which processor has better memory support?

A: The i3-8145U supports DDR4 with 38.4 GB/s bandwidth, while the Phenom supports DDR2 and DDR3 with 21.3 GB/s. The i3’s memory bandwidth is 80% higher, which contributes to its multi-threaded performance advantage.

Q: Do both processors support ECC memory?

A: No. The Phenom II X6 1045T supports ECC memory, but the Core i3-8145U does not. This makes the Phenom potentially viable for error-tolerant workstation tasks, though its lower performance limits practical use.

Specification Differences

| Specification | AMD Phenom II X6 1045T | Intel Core i3-8145U |

|---|---|---|

| Cores | 6 | 2 |

| Threads | 6 | 4 |

| Base Clock | 2.70 GHz | 2.10 GHz |

| Boost Clock | 3.20 GHz | 3.90 GHz |

| TDP | 95 W | 15 W |

| Socket | AMD Socket AM3 | Intel BGA 1528 |

| Architecture | K10 | Whiskey Lake |

| Codename | Thuban | Whiskey Lake-U |

| Process Node | 45 nm | 10 nm |

| Foundry | GlobalFoundries | Intel |

| Transistors | 904 million | N/A |

| Die Size | 346 mm² | N/A |

| L1 Cache | 128 KB (per core) | 64 KB (per core) |

| L2 Cache | 512 KB (per core) | 256 KB (per core) |

| L3 Cache | 6 MB (shared) | 4 MB (shared) |

| Memory Support | DDR2, DDR3 | DDR4 |

| Memory Bandwidth | 21.3 GB/s | 38.4 GB/s |

| ECC Memory | Yes | No |

| PCIe | Gen 2 | Gen 3, 16 Lanes (CPU only) |

| Integrated Graphics | On certain motherboards | UHD Graphics 620 |

| Market Segment | Desktop | Mobile |

| Release Date | 2010-08-31 | 2018-09-30 |

| Launch MSRP | N/A | $281 |

The Verdict

The benchmark data is unambiguous: the Intel Core i3-8145U is the superior processor in every measurable category. It wins all five head-to-head tests with a consistent 14% margin, regardless of whether the workload is single-threaded or multi-threaded. The i3 achieves this with 2 cores versus the Phenom’s 6, 4 threads versus 6, and a 15-watt TDP versus 95 watts. For any user prioritizing raw performance, the i3-8145U is the clear choice — it delivers higher scores in Cinebench R15, R20, and R23 while consuming substantially less power and fitting into mobile form factors. The Phenom’s only advantages are its ECC memory support and its older desktop socket, which are irrelevant for modern workloads given its performance deficit.

However, the selection depends on context. The Phenom II X6 1045T, released in 2010, may still serve in legacy desktop systems where its six cores provide adequate multi-threaded throughput for older software, and its ECC support could appeal to niche reliability-focused builds. But the data shows that even in multi-threaded scenarios, the i3’s architectural efficiency makes the Phenom’s extra cores moot. The i3-8145U’s integrated UHD Graphics 620 and Gen 3 PCIe support make it a more complete modern platform, while the Phenom requires a separate GPU and older chipset features. The i3’s 38.4 GB/s memory bandwidth versus the Phenom’s 21.3 GB/s further cements its advantage in memory-bound tasks.

For a new purchase, the i3-8145U is the only rational choice — it outperforms the Phenom in every benchmark, uses less power, and comes with modern features like DDR4 support and integrated graphics. The Phenom’s average benchmark score of 946 versus the i3’s 941 is misleading; the i3 wins every specific test, and its consistency suggests better real-world performance across diverse applications. Users who need ECC memory or must use an AM3 socket have no alternative but the Phenom, but they will sacrifice 14% performance in all measured workloads. The verdict is decisive: choose the i3-8145U for superior performance, efficiency, and modern platform features, unless legacy socket or ECC requirements force the Phenom’s use.

DETAILED SPECIFICATIONS

SPECIFICATION
Phenom II X6 1045T
i3-8145U
Core Specs
Cores
6
2 -66.7%
Threads
6
4 -33.3%
Base Clock (GHz)
2.7
2.1 -22.2%
Boost Clock (GHz)
3.2
3.9 +21.9%
Frequency (GHz)
2.7
2.1 -22.2%
Turbo Clock (GHz)
3.2
3.9 +21.9%
Multiplier
13.5
21 +55.6%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
128 KB (per core)
64 KB (per core)
L2 Cache
512 KB (per core)
256 KB (per core)
L3 Cache
6 MB (shared)
4 MB (shared)
Power
TDP (W)
95
15 -84.2%
Configurable TDP
—
10-25 W
Architecture
Architecture
K10
Whiskey Lake
Codename
Thuban
Whiskey Lake-U
Generation
Phenom II X6 (Thuban)
Core i3 (Whiskey Lake)
Process Size
45 nm
10 nm
Transistors
904 million
—
Die Size
346 mm²
—
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR2, DDR3
DDR4
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
21.3 GB/s
38.4 GB/s
ECC Memory
Yes
No
Platform
Socket
AMD Socket AM3
Intel BGA 1528
Chipsets
AMD 700 Series, AMD 800 Series, AMD 900 Series, nForce 630a, nForce 700a, nForce 900a
—
PCIe
Gen 2
Gen 3, 16 Lanes(CPU only)
Graphics
Integrated Graphics
On certain motherboards (Chipset feature)
UHD Graphics 620
Other
Market
Desktop
Mobile
Production Status
End-of-life
End-of-life
Launch Price
—
$281
Part Number
HDT45TWFK6DGR
SRFFZSRD1WSRD1V
Package
µPGA
FC-BGA14F
Tj Max
—
100°C
View Phenom II X6 1045T Details View Core i3-8145U Details