AMD Phenom II X6 1035T vs Intel Xeon X5550 Comparison

AMD
AMD

AMD Phenom II X6 1035T

CORE STATE Thuban
CORE SPECS 6 Cores / 6 Threads
CLOCK SPEED 2.6 Base / 3.1 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 95W
ARCHITECTURE K10
nm
PROCESS 45 nm
LAUNCH DATE 2010
VS
Intel
INTEL

Xeon X5550

CORE STATE Gainestown
CORE SPECS 4 Cores / 8 Threads
CLOCK SPEED 2.67 Base / 3.07 GHz Turbo
CACHE 8 MB (shared)
MAX TDP 95W
ARCHITECTURE Nehalem
nm
PROCESS 45 nm
LAUNCH DATE 2009

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
258
259
cinebench_cinebench_r20_multicore
1,075
1,083
cinebench_cinebench_r20_singlecore
151
152
cinebench_cinebench_r23_multicore
2,561
2,580
cinebench_cinebench_r23_singlecore
361
364

Analysis: AMD Phenom II X6 1035T vs Intel Xeon X5550

The Intel Xeon X5550 and AMD Phenom II X6 1035T are two end-of-life processors from different eras and market segments, yet benchmark results place them in an unusually tight contest. Across every measured Cinebench workload, the Xeon X5550 emerges victorious, but the margins are razor-thin, ranging from a mere 0.4% to 0.8%. The data indicates that while the Xeon holds a consistent, albeit narrow, performance lead, the Phenom II X6 offers a fundamentally different core configuration that makes the choice between them dependent on workload type and platform requirements rather than raw speed.

Where Each One Wins

The Intel Xeon X5550 wins every single benchmark in this comparison, but the nature of those wins reveals its strengths. In multi-threaded workloads, the Xeon’s advantage comes from its Hyper-Threading technology, which allows its 4 physical cores to process 8 threads simultaneously. This is evident in the Cinebench R23 multi-core test, where the Xeon scores 2580 against the Phenom’s 2561, a 0.7% lead. The Xeon’s edge in single-core performance is equally consistent, with a 0.8% lead in Cinebench R23 single-core (364 vs 361). This suggests that despite the Phenom’s two additional physical cores, the Xeon’s architectural efficiency in both single-threaded and multi-threaded execution is slightly superior.

The AMD Phenom II X6 1035T, despite losing all head-to-head matchups, has a clear theoretical advantage in raw core count. With 6 physical cores and 6 threads, it offers more parallel execution units than the Xeon’s 4 cores and 8 threads. In workloads that scale perfectly with physical cores and do not benefit from Hyper-Threading, the Phenom’s extra cores could potentially close the gap or even overtake the Xeon. However, the benchmark data shows that in the Cinebench suite, which is highly optimized for multi-threading, the Xeon’s Hyper-Threading proves more effective than the Phenom’s additional physical cores. The Phenom’s wins would likely come in specific legacy applications or scenarios where 6 true cores outperform 4 cores with 8 threads, but no such benchmark victory is recorded here.

Architecture Differences

The two processors are built on fundamentally different architectures. The Xeon X5550 is based on Intel’s Nehalem architecture, codenamed Gainestown, and is manufactured on a 45 nm process at Intel’s own foundry. It packs 731 million transistors into a 263 mm² die. The Phenom II X6 1035T uses AMD’s K10 architecture, codenamed Thuban, also on a 45 nm process but fabricated by GlobalFoundries. The AMD chip is significantly larger, with 904 million transistors on a 346 mm² die. This size difference is partly due to the Phenom’s two extra cores, but it also reflects the architectural divergence in cache design.

The cache hierarchies are notably different. The Xeon allocates 64 KB of L1 and 256 KB of L2 per core, with a shared 8 MB L3 cache. The Phenom provides a larger 128 KB L1 and 512 KB L2 per core, but a smaller 6 MB shared L3 cache. This means the Phenom has more dedicated cache per core for its six cores (totaling 3 MB L2), while the Xeon relies more heavily on its larger shared L3 cache to feed its eight threads. Memory support also diverges: the Xeon uses triple-channel DDR3, while the Phenom supports both DDR2 and DDR3 in a dual-channel configuration. The Phenom’s memory bandwidth is listed at 21.3 GB/s, while the Xeon’s is not specified in the data, but the triple-channel setup historically provides higher bandwidth than dual-channel.

Other key differences include the platform sockets (Intel Socket 1366 for the Xeon, AMD Socket AM3 for the Phenom) and market positioning. The Xeon is a Server/Workstation part, while the Phenom is a Desktop processor. The Phenom also lists integrated graphics as a chipset feature on certain motherboards, whereas the Xeon has no integrated graphics. Both support ECC memory and PCIe Gen 2, and neither has an unlocked multiplier.

Head-to-Head Benchmarks

The benchmark results are remarkably consistent across all five tests, with the Xeon X5550 winning each one. The smallest margin is in Cinebench R15 multi-core, where the Xeon scores 259 against the Phenom’s 258, a 0.4% difference. This is the closest result and indicates that in this older benchmark, the two are nearly identical. Moving to Cinebench R20 multi-core, the Xeon scores 1083 versus 1075, a 0.7% lead. The single-core tests show similar patterns: in Cinebench R20 single-core, the Xeon leads 152 to 151 (0.7%), and in R23 single-core, it leads 364 to 361 (0.8%).

The largest win for the Xeon is in Cinebench R23 multi-core, where it scores 2580 against 2561, a 0.7% difference. While this is the biggest absolute gap (19 points), it still represents a negligible performance advantage in real-world terms. The data suggests that across all generations of the Cinebench benchmark, the Xeon’s architectural efficiency and Hyper-Threading provide a consistent, if marginal, edge over the Phenom’s raw six-core configuration. The Phenom never manages to win a single test, meaning that in this benchmark suite at least, the Xeon’s 4 cores and 8 threads are better utilized than the AMD’s 6 cores and 6 threads.

FAQ

Q: Which processor has more physical cores?

A: The AMD Phenom II X6 1035T has 6 physical cores and 6 threads. The Intel Xeon X5550 has 4 physical cores but 8 threads thanks to Hyper-Threading.

Q: What is the performance difference in multi-core workloads?

A: The Xeon X5550 wins all multi-core benchmarks. In Cinebench R23 multi-core, it scores 2580 versus the Phenom’s 2561, a 0.7% lead. In Cinebench R15 multi-core, the lead is only 0.4% (259 vs 258).

Q: Does the Phenom have any advantage in single-core performance?

A: No, the benchmark data shows the Xeon leads in single-core tests as well. In Cinebench R23 single-core, the Xeon scores 364 against the Phenom’s 361, a 0.8% difference.

Q: What are the memory support differences?

A: The Xeon X5550 supports triple-channel DDR3 memory. The Phenom II X6 1035T supports both DDR2 and DDR3 in a dual-channel configuration, with a listed memory bandwidth of 21.3 GB/s.

Q: Are these processors still in production?

A: No, both are listed as end-of-life products. The Xeon was released on 2009-03-29, while the Phenom was released on 2010-04-26.

Q: Which processor has a larger L3 cache?

A: The Intel Xeon X5550 has a larger shared L3 cache at 8 MB, while the AMD Phenom II X6 1035T has 6 MB of shared L3 cache.

The Verdict

The benchmark data is unambiguous: the Intel Xeon X5550 outperforms the AMD Phenom II X6 1035T in every single test. The margins are small, but they are consistent across all five Cinebench workloads, indicating an architectural superiority rather than a benchmark-specific quirk. The Xeon’s Hyper-Threading technology allows its 4 cores to effectively handle 8 threads, which proves more efficient than the Phenom’s 6 physical cores in these multi-threaded tests. For users prioritizing raw Cinebench performance, the Xeon is the clear choice from the data.

However, the choice is not solely about benchmark scores. The Phenom II X6 offers a true 6-core configuration, which could be advantageous in software that does not scale well with Hyper-Threading or that benefits from additional physical cores. The Phenom also has a larger L1 and L2 cache per core, which might help in certain cache-sensitive workloads. Its dual-channel memory support with DDR2 compatibility provides more flexibility for older platforms, while the Xeon’s triple-channel DDR3 setup may offer higher bandwidth in memory-intensive tasks, though this is not directly measured here.

The market segments also differ: the Xeon is a server/workstation processor on Socket 1366, while the Phenom is a desktop part on Socket AM3. This means the platform choice (motherboard, chipset, memory type) will heavily influence which processor is practical. The Xeon’s 95 W TDP matches the Phenom’s 95 W TDP, so power consumption is not a deciding factor. The Xeon also has a higher base clock (2.67 GHz vs 2.60 GHz) and a slightly lower boost clock (3.07 GHz vs 3.10 GHz) than the Phenom.

Ultimately, the data shows that for pure benchmark performance, the Xeon X5550 is the winner. For users who need six physical cores for specific applications or prefer the AM3 platform, the Phenom II X6 1035T remains a viable option, but the benchmark results indicate it is slightly slower in all tested scenarios.

Specification Differences

| Specification | Intel Xeon X5550 | AMD Phenom II X6 1035T |

|---|---|---|

| Cores | 4 | 6 |

| Threads | 8 | 6 |

| Base Clock | 2.67 GHz | 2.60 GHz |

| Boost Clock | 3.07 GHz | 3.10 GHz |

| Socket | Intel Socket 1366 | AMD Socket AM3 |

| Architecture | Nehalem | K10 |

| Codename | Gainestown | Thuban |

| Process Node | 45 nm (Intel) | 45 nm (GlobalFoundries) |

| Transistors | 731 million | 904 million |

| Die Size | 263 mm² | 346 mm² |

| L1 Cache | 64 KB (per core) | 128 KB (per core) |

| L2 Cache | 256 KB (per core) | 512 KB (per core) |

| L3 Cache | 8 MB (shared) | 6 MB (shared) |

| Memory Support | DDR3 | DDR2, DDR3 |

| Memory Bus | Triple-channel | Dual-channel |

| Memory Bandwidth | Not specified | 21.3 GB/s |

| Integrated Graphics | None | On certain motherboards (Chipset feature) |

| Market Segment | Server/Workstation | Desktop |

| Release Date | 2009-03-29 | 2010-04-26 |

DETAILED SPECIFICATIONS

SPECIFICATION
Phenom II X6 1035T
X5550
Core Specs
Cores
6
4 -33.3%
Threads
6
8 +33.3%
Base Clock (GHz)
2.6
2.67 +2.7%
Boost Clock (GHz)
3.1
3.07 -1.0%
Frequency (GHz)
2.6
2.67 +2.7%
Turbo Clock (GHz)
3.1
3.07 -1.0%
Multiplier
13
20 +53.8%
SMP CPUs
1
2 +100.0%
Cache
L1 Cache
128 KB (per core)
64 KB (per core)
L2 Cache
512 KB (per core)
256 KB (per core)
L3 Cache
6 MB (shared)
8 MB (shared)
Power
TDP (W)
95
95 0.0%
Architecture
Architecture
K10
Nehalem
Codename
Thuban
Gainestown
Generation
Phenom II X6 (Thuban)
Xeon (Gainestown)
Process Size
45 nm
45 nm
Transistors
904 million
731 million
Die Size
346 mm²
263 mm²
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR2, DDR3
DDR3
Memory Bus
Dual-channel
Triple-channel
Memory Bandwidth
21.3 GB/s
—
ECC Memory
Yes
Yes
Platform
Socket
AMD Socket AM3
Intel Socket 1366
Chipsets
AMD 700 Series, AMD 800 Series, AMD 900 Series, nForce 630a, nForce 700a, nForce 900a
—
PCIe
Gen 2
Gen 2
Graphics
Integrated Graphics
On certain motherboards (Chipset feature)
—
Other
Market
Desktop
Server/Workstation
Production Status
End-of-life
End-of-life
Part Number
HDT35TWFK6DGRHDT35TWFGRBOX
SLBF5
Package
µPGA
FC-LGA8
View Phenom II X6 1035T Details View Xeon X5550 Details