AMD Phenom II X6 1035T vs Intel Pentium G4560T Comparison
AMD Phenom II X6 1035T
Pentium G4560T
PERFORMANCE BENCHMARKS
Analysis: AMD Phenom II X6 1035T vs Intel Pentium G4560T
The Intel Pentium G4560T and the AMD Phenom II X6 1035T represent two very different eras of desktop computing, one a modern low-power dual-core with hyper-threading, the other a legacy six-core powerhouse from AMD’s K10 architecture. Benchmark data from this database shows a remarkably tight contest, with the AMD chip winning every single head-to-head test, yet the margins are so narrow that the overall average benchmark score difference is less than one percent. This analysis examines the performance data, architectural gaps, and specification differences to determine where each processor holds a genuine advantage.
Head-to-Head Benchmarks
The head-to-head results are striking for their uniformity. Across all five compared tests, the AMD Phenom II X6 1035T emerges as the winner, but the victory margins are razor-thin. In Cinebench R15 multicore, the Phenom scores 258 against the Pentium’s 256, a delta of -0.8% from the Intel part’s perspective. The pattern continues in Cinebench R20 multicore, where the Phenom’s 1075 beats the Pentium’s 1068 by just 0.7%. Even in single-core tests, where Intel’s Kaby Lake architecture traditionally excels, the AMD chip holds a lead: Cinebench R20 single-core shows 151 versus 150, a 0.7% edge, and Cinebench R23 single-core shows 361 versus 359, a 0.6% advantage.
The largest gap appears in Cinebench R23 multicore, where the Phenom scores 2561 against the Pentium’s 2544, still only a 0.7% difference. This is a remarkable outcome given the architectural chasm between the two. The Pentium’s two cores with four threads are leveraging a modern 14 nm process and much higher instructions-per-clock, while the Phenom’s six physical cores at a lower 2.60 GHz base clock rely on brute core count. The data suggests that in these particular Cinebench workloads, the extra four physical cores of the AMD part just barely outweigh the Intel chip’s superior per-core efficiency.
It is notably the Pentium G4560T has a Geekbench multicore score of 1237 and a single-core score of 594, while the Phenom II X6 1035T lacks Geekbench results in this dataset. The average benchmark score for the Pentium is 887, placing it in the 24th percentile of all CPUs, while the Phenom’s average is 881, in the 23rd percentile. The nearest rivals for the Pentium include the AMD PRO A8-8650B with an identical average score of 887 and a 0% delta, and the Intel Core i3-6100 at 888 with a -0.2% delta. The Phenom’s nearest rivals include the Intel Core i3-1000NG4 at 881 with a 0% delta and the AMD Athlon Silver 7120U also at 881. These percentile rankings confirm that both processors sit in the same performance tier, despite their vastly different designs.
FAQ
Q: Which processor wins the majority of benchmark comparisons?
A: The AMD Phenom II X6 1035T wins all five head-to-head benchmark tests in this database, including Cinebench R15, R20, and R23 in both single-core and multicore modes. The Intel Pentium G4560T has zero wins in the head-to-head comparison.
Q: How large is the performance gap in multi-core workloads?
A: The largest multi-core gap is in Cinebench R23, where the Phenom scores 2561 versus the Pentium’s 2544, a difference of 0.7%. In Cinebench R15, the gap is 258 versus 256, also a 0.7% difference.
Q: Is the Intel Pentium G4560T competitive in single-core performance?
A: The data shows it is nearly identical to the Phenom. In Cinebench R20 single-core, the Pentium scores 150 versus 151 for the AMD chip, a 0.7% deficit. In Cinebench R23 single-core, the scores are 359 versus 361, a 0.6% difference.
Q: What do the overall percentile rankings indicate about these CPUs?
A: The Pentium G4560T is in the 24th percentile of all CPUs, with an average benchmark score of 887. The Phenom II X6 1035T is in the 23rd percentile, with an average score of 881. This places both firmly in the entry-level performance tier.
Q: Does the Pentium have any benchmark data that the Phenom lacks?
A: Yes, the Pentium G4560T has Geekbench multicore and single-core scores of 1237 and 594, respectively. The Phenom II X6 1035T does not have any Geekbench entries in this dataset.
Q: Which processor has a higher boost clock?
A: The AMD Phenom II X6 1035T has a boost clock of 3.10 GHz, while the Intel Pentium G4560T has no boost clock listed, operating solely at its 2.90 GHz base frequency.
Architecture Differences
The architectural divide between these two processors is vast. The Intel Pentium G4560T is built on the Kaby Lake architecture using a 14 nm process node manufactured by Intel. It features two physical cores with four threads via hyper-threading, a design that emphasizes high single-thread throughput and energy efficiency. The Phenom II X6 1035T, in contrast, uses AMD’s K10 architecture under the Thuban codename, fabricated on a 45 nm process by GlobalFoundries. This is a much older and larger design, with six physical cores and no simultaneous multi-threading, meaning it has exactly six threads.
Cache configurations further illustrate the divide. The Pentium has 64 KB of L1 cache per core and 256 KB of L2 per core, with a shared 3 MB L3 cache. The Phenom has 128 KB of L1 per core and 512 KB of L2 per core, plus a shared 6 MB L3 cache. The Phenom’s larger caches are a direct result of its more numerous and wider cores, but the Pentium’s smaller cache sizes are compensated by its more efficient memory controller and newer process. The Phenom also supports ECC memory, while the Pentium does not, a feature that suggests the AMD chip was aimed at entry-level servers or workstations in its era.
Memory support also differs fundamentally. The Pentium uses DDR4 memory with a dual-channel bus and a peak bandwidth of 38.4 GB/s. The Phenom supports both DDR2 and DDR3, also dual-channel, but with a significantly lower peak bandwidth of 21.3 GB/s. This memory bandwidth advantage for the Intel chip is substantial and likely contributes to its ability to keep pace with the AMD part in multi-core tests despite having fewer cores. The Phenom’s PCIe support is Gen 2, while the Pentium offers PCIe Gen 3 with 16 lanes from the CPU, a modern standard that allows for faster peripheral connectivity.
Specification Differences
The specification table reveals several critical differences beyond the obvious core count. The Pentium G4560T has a base clock of 2.90 GHz with no boost clock, while the Phenom II X6 1035T runs at a 2.60 GHz base but can boost to 3.10 GHz. The thermal design power is a major differentiator: the Pentium draws only 35 W, while the Phenom consumes 95 W, a nearly threefold increase in power requirement. The Pentium uses the Intel Socket 1151, while the Phenom uses the older AMD Socket AM3, meaning they are not interchangeable in any system.
The process node difference is stark: 14 nm for Intel versus 45 nm for AMD. The Phenom’s transistor count is listed as 904 million on a 346 mm² die, while the Pentium’s transistor count and die size are not provided in this dataset. The Pentium includes Intel HD 610 integrated graphics, while the Phenom relies on a chipset feature for graphics on certain motherboards. The Pentium’s memory support is DDR4 only, whereas the Phenom supports both DDR2 and DDR3. The Pentium’s production status is listed as Active, while the Phenom is End-of-life. The Pentium was released on 2017-01-02, while the Phenom’s release date is 2010-04-26, a gap of nearly seven years.
Where Each One Wins
Despite the Phenom’s clean sweep in head-to-head tests, the use-case analysis is more nuanced. The AMD Phenom II X6 1035T wins in every Cinebench benchmark, but the margins are so small that they would be imperceptible in real-world applications. Its victory in single-core tests, albeit by less than 1%, is surprising and indicates that the older K10 architecture is not as far behind as one might expect. The Phenom also offers ECC memory support, which is a meaningful feature for users running memory-intensive workloads that require error correction, a capability the Pentium lacks entirely.
The Intel Pentium G4560T wins decisively in efficiency and platform modernity. Its 35 W TDP versus the Phenom’s 95 W TDP means it generates far less heat and requires a much smaller power supply, making it suitable for compact or passively cooled systems. The Pentium’s DDR4 memory support and 38.4 GB/s bandwidth are roughly 80% higher than the Phenom’s 21.3 GB/s, which can benefit applications that are memory-bandwidth sensitive. The integrated Intel HD 610 graphics provide a complete solution without needing a discrete GPU, whereas the Phenom’s graphics capability is dependent on motherboard chipsets. The Pentium’s PCIe Gen 3 support also allows for faster NVMe SSDs and modern expansion cards compared to the Phenom’s Gen 2.
In terms of raw compute for multi-threaded rendering, the Phenom’s six cores give it a theoretical advantage, and the benchmark data confirms it wins all Cinebench tests. However, the difference is so marginal that a user would likely not notice any speed difference in daily use. The Pentium, with its lower power draw and newer platform, is the better choice for a low-power media server or a basic office PC where efficiency and modern connectivity matter more than the last few percentage points of multi-core performance. The Phenom’s end-of-life status and legacy socket make it a poor choice for new builds, while the Pentium remains active in production. Ultimately, the benchmark scores suggest these two CPUs deliver nearly identical performance, but the Pentium achieves this with a fraction of the power and on a much more modern platform.