AMD Opteron 6282 SE vs Intel Core i7-4760HQ Comparison
AMD Opteron 6282 SE
Core i7-4760HQ
PERFORMANCE BENCHMARKS
Analysis: AMD Opteron 6282 SE vs Intel Core i7-4760HQ
The AMD Opteron 6282 SE and Intel Core i7-4760HQ occupy opposite ends of the hardware spectrum: a 16-core server processor built for dual-die scaling versus a 4-core mobile chip with integrated graphics. The benchmark data reveals a surprisingly consistent pattern — the Opteron wins every single head-to-head test, yet the margin is so narrow that the two parts land within 1% of each other in average performance. This page analyzes where each processor actually excels, what the architecture differences mean, and who should choose which based strictly on the measured results.
Where Each One Wins
The Opteron 6282 SE claims victory in all six Cinebench tests, from single-core to multi-core workloads. The largest measured advantage appears in the R23 multi-core test, where the AMD part scores 5427 against the Intel's 5355. That is a 1.3% lead, which is consistent across every benchmark iteration — the deltaPct never changes from 1.3% in any of the six comparisons. The Opteron also wins the single-core tests, scoring 766 in R23 single-core versus 756 for the i7-4760HQ.
However, the i7-4760HQ wins where the benchmarks do not measure: power efficiency and platform integration. The Intel part draws a 47W TDP compared to the Opteron's 140W, which means the mobile chip delivers nearly identical performance at roughly one-third the power envelope. The i7 also includes Intel HD 5200 integrated graphics, a feature the Opteron lacks entirely. For workloads that do not stress the CPU to its limits, the Intel part's lower thermal footprint makes it the practical winner for mobile or compact systems.
The Opteron wins on raw core count and memory bandwidth. With 16 cores and threads versus the i7's 4 cores and 8 threads, the AMD part should theoretically dominate multi-threaded tasks. Yet the data shows only a marginal 1.3% lead, indicating that the Opteron's Bulldozer architecture does not scale efficiently with its core count in Cinebench workloads. The Opteron also doubles the memory bandwidth at 51.2 GB/s versus 25.6 GB/s, and supports ECC memory, which the i7 does not.
Architecture Differences
The two processors come from fundamentally different design philosophies. The Opteron 6282 SE uses AMD's Bulldozer architecture, codenamed Interlagos, built on a 32nm process. It packs 2,400 million transistors across a dual-die design, with each die measuring 315 mm² — totaling 2x 315 mm². The i7-4760HQ uses Intel's Haswell architecture, codenamed Crystalwell, on a 22nm process, with 1,400 million transistors on a single 264 mm² die. The process advantage gives Intel a smaller, denser chip despite having fewer cores.
Cache configurations tell a story of different priorities. The Opteron allocates 768 KB of L1 cache, 2 MB of L2 per module, and 8 MB of L3 per die. The i7 provides 64 KB of L1 per core, 256 KB of L2 per core, and 6 MB of shared L3. The Opteron's modular design shares cache resources across core pairs, while the Intel design dedicates cache per core. This explains why the Opteron's 16 cores cannot translate into a massive performance lead — the Bulldozer modules share execution resources, effectively halving the true independent core count.
Memory support differs sharply. The Opteron runs DDR3 over a quad-channel bus with 51.2 GB/s bandwidth and ECC support, ideal for server reliability. The i7 runs DDR3 over a dual-channel bus with 25.6 GB/s bandwidth and no ECC. The Opteron also uses PCIe Gen 2, while the i7 uses PCIe Gen 3 with 16 lanes from the CPU. The i7's integrated graphics and lower TDP make it a complete mobile package, whereas the Opteron is a bare server chip requiring a discrete GPU.
Head-to-Head Benchmarks
The data is uniform: the Opteron wins every test by exactly 1.3%. In Cinebench R15 multi-core, the Opteron scores 546 against 539. Single-core R15 shows 77 versus 76. R20 multi-core gives 2279 versus 2249, and single-core gives 321 versus 317. R23 multi-core yields 5427 versus 5355, and single-core 766 versus 756. The consistency of the 1.3% delta across all six tests suggests a fixed performance relationship rather than workload-specific variation.
The average benchmark scores narrow the gap further. The Opteron averages 1569, while the i7 averages 1549. That is a 1.3% difference, matching the head-to-head deltas. The Opteron sits in the 39th percentile of all CPUs, and the i7 in the 38th — essentially tied. The nearest rivals for each processor underscore this parity: the Opteron's closest competitor is the Intel Core i3-8300 at 1564 (0.3% delta), while the i7's closest is the Intel Core i5-4690S at 1551 (-0.1% delta). Both processors land in the same performance tier as mid-range desktop chips from several generations later.
What the benchmarks do not show is any scenario where the i7 wins. The winsA count is 6, winsB is 0. Yet the margins are so slim that real-world differences would likely be imperceptible. The Opteron's advantage of 1.3% is within run-to-run variance for most workloads. The more meaningful difference is the power draw: 47W versus 140W means the i7 delivers 93W less heat output, which is critical for mobile devices or dense server racks.
The Verdict
The Opteron 6282 SE wins on paper, but the i7-4760HQ wins in practice for most users. The data shows the Opteron leads by 1.3% in every benchmark, yet it consumes nearly three times the power. For a server environment where ECC memory and quad-channel bandwidth matter, the Opteron is the correct choice — its 51.2 GB/s memory bandwidth and 16 cores serve workloads that the i7 cannot handle, despite the similar Cinebench scores.
For mobile or compact systems, the i7-4760HQ is the only viable option. It has integrated graphics, a 47W TDP, and PCIe Gen 3 support. The Opteron has no integrated graphics and requires a server motherboard with Socket G34. The i7's 4 cores and 8 threads with 6 MB of shared L3 cache are sufficient for most desktop tasks, and the lower power draw allows for thinner, quieter designs.
The average benchmark scores tell the real story: 1569 versus 1549, a 1.3% gap. Both processors are end-of-life products, but the i7 launched in 2014 compared to the Opteron's 2011 release. The Opteron's higher launch MSRP of $1019 reflects its server positioning, but the performance data does not justify that premium in Cinebench workloads. Users needing raw multi-core throughput should look at the 16-core Opteron, while those prioritizing efficiency and portability should pick the i7.
FAQ
Q: Which processor has more cores?
A: The AMD Opteron 6282 SE has 16 cores and 16 threads, while the Intel Core i7-4760HQ has 4 cores and 8 threads.
Q: Does the Opteron always beat the i7 in benchmarks?
A: Yes, the Opteron wins all six head-to-head Cinebench tests, but the margin is consistently 1.3% in each test.
Q: Which processor supports ECC memory?
A: The AMD Opteron 6282 SE supports ECC memory, while the Intel Core i7-4760HQ does not.
Q: What is the power consumption difference?
A: The Opteron has a TDP of 140W, while the i7 has a TDP of 47W.
Q: Does the i7 have integrated graphics?
A: Yes, the Intel Core i7-4760HQ includes Intel HD 5200 integrated graphics, while the Opteron has none.
Q: What is the memory bandwidth difference?
A: The Opteron provides 51.2 GB/s over a quad-channel bus, while the i7 provides 25.6 GB/s over a dual-channel bus.
Specification Differences
| Specification | AMD Opteron 6282 SE | Intel Core i7-4760HQ |
|---|---|---|
| Cores | 16 | 4 |
| Threads | 16 | 8 |
| Base Clock | 2.60 GHz | 2.10 GHz |
| Boost Clock | 3.30 GHz | 3.30 GHz |
| TDP | 140W | 47W |
| Socket | AMD Socket G34 | Intel BGA 1364 |
| Architecture | Bulldozer | Haswell |
| Codename | Interlagos | Crystalwell |
| Process Node | 32 nm | 22 nm |
| Transistors | 2,400 million | 1,400 million |
| Die Size | 2x 315 mm² | 264 mm² |
| L1 Cache | 768 KB | 64 KB (per core) |
| L2 Cache | 2 MB (per module) | 256 KB (per core) |
| L3 Cache | 8 MB (per die) | 6 MB (shared) |
| Memory Bus | Quad-channel | Dual-channel |
| Memory Bandwidth | 51.2 GB/s | 25.6 GB/s |
| ECC Memory | Yes | No |
| PCIe | Gen 2 | Gen 3, 16 Lanes (CPU only) |
| Integrated Graphics | None | Intel HD 5200 |
| Market Segment | Server/Workstation | Mobile |
| Release Date | 2011-11-13 | 2014-01-31 |
| Launch MSRP | $1019 | Not available |