AMD Opteron 4226 vs AMD Phenom II X6 1065T Comparison
AMD Opteron 4226
Phenom II X6 1065T
PERFORMANCE BENCHMARKS
Analysis: AMD Opteron 4226 vs AMD Phenom II X6 1065T
The Verdict
The data presents a remarkably close contest between two six-core AMD processors from different eras and intended markets. The AMD Opteron 4226, a server/workstation part built on the Bulldozer architecture, wins all five head-to-head benchmark comparisons against the AMD Phenom II X6 1065T, a desktop K10 chip. However, the margins are extraordinarily thin. The largest victory is a 0.6% lead in Cinebench R20 single-core, while the multicore deltas are 0.1% or 0.3%. The average benchmark scores reinforce this: the Opteron 4226 sits at 995, while the Phenom II X6 1065T trails at 993. Both processors occupy the 27th percentile among all CPUs, indicating they deliver nearly identical overall performance. The Opteron 4226 wins every benchmark, yet the practical difference is negligible. Buyers with a Socket C32 platform should choose the Opteron 4226 for its consistent, if marginal, benchmark edge and lower TDP of 95 watts versus 125 watts. Those on Socket AM3 have no reason to switch, as the Phenom II X6 1065T matches the Opteron within a fraction of a percent across all tested workloads.
Architecture Differences
The two chips represent fundamentally different AMD design philosophies. The Opteron 4226 uses the Bulldozer architecture, codenamed Valencia, built on a 32 nm process node. It packs 1,200 million transistors into a 315 mm² die. In contrast, the Phenom II X6 1065T uses the older K10 architecture, codenamed Thuban, fabricated on a 45 nm process. It contains 904 million transistors spread across a larger 346 mm² die. Both were produced by GlobalFoundries, but the process shrink gives the Opteron a denser design.
Cache configurations differ substantially. The Opteron 4226 has 288 KB of L1 cache, 6 MB of L2 cache, and 8 MB of shared L3 cache. The Phenom II X6 1065T allocates cache per core: 128 KB of L1 and 512 KB of L2 per core, totaling roughly 768 KB L1 and 3 MB L2 across six cores, with 6 MB of shared L3. The Opteron's larger L3 cache (8 MB vs 6 MB) and different L2 distribution reflect its server-oriented design. Memory support also diverges: the Opteron supports DDR3 only via dual-channel, while the Phenom supports both DDR2 and DDR3. Memory bandwidth favors the Opteron at 25.6 GB/s versus 21.3 GB/s for the Phenom. Both support ECC memory and PCIe Gen 2. The Opteron lacks integrated graphics entirely, while the Phenom's integrated graphics are listed as a chipset feature on certain motherboards. The Opteron targets the Socket C32 platform for server/workstation use, whereas the Phenom uses Socket AM3 for desktop systems.
Head-to-Head Benchmarks
The benchmark results show a consistent but minuscule advantage for the Opteron 4226 across all five Cinebench tests. In Cinebench R15 multicore, the Opteron scores 291 against the Phenom's 290, a 0.3% lead. This pattern repeats in Cinebench R20 multicore, where the Opteron scores 1213 versus 1212, a 0.1% edge. The single-core tests tell a similar story: Cinebench R20 single-core has the Opteron at 171 and the Phenom at 170, yielding a 0.6% advantage — the largest delta in the entire comparison. Cinebench R23 multicore shows the Opteron at 2890 versus 2888 (0.1%), and Cinebench R23 single-core shows 408 versus 407 (0.2%). Across all five tests, the Opteron wins by an average of roughly 0.26%.
These results suggest the architectural differences between Bulldozer and K10 have essentially no measurable impact in these Cinebench workloads. The Opteron's higher memory bandwidth (25.6 GB/s vs 21.3 GB/s) and larger L3 cache (8 MB vs 6 MB) do not translate into meaningful performance gains. The base clock difference — the Phenom runs at 2.90 GHz base and 3.40 GHz boost, while the Opteron runs at 2.70 GHz base and 3.10 GHz boost — appears to be offset by the Opteron's architectural efficiencies. The data implies that for these specific rendering tasks, both chips are effectively equivalent, with the Opteron holding a razor-thin edge that would be imperceptible in real-world use.
Specification Differences
The two processors differ across several key specifications. The Opteron 4226 has a base clock of 2.70 GHz and a boost clock of 3.10 GHz, while the Phenom II X6 1065T runs faster at 2.90 GHz base and 3.40 GHz boost. The Opteron has a TDP of 95 watts, significantly lower than the Phenom's 125 watts, despite the Phenom's higher clocks. The Opteron uses Socket C32, while the Phenom uses Socket AM3. The Opteron is built on a 32 nm process with 1,200 million transistors on a 315 mm² die; the Phenom uses a 45 nm process with 904 million transistors on a 346 mm² die. Cache layouts differ as described above: the Opteron has 288 KB L1, 6 MB L2, and 8 MB shared L3; the Phenom has 128 KB L1 and 512 KB L2 per core, plus 6 MB shared L3. Memory support shows the Opteron limited to DDR3, while the Phenom supports DDR2 and DDR3. Memory bandwidth favors the Opteron at 25.6 GB/s versus 21.3 GB/s. The Opteron has no integrated graphics, while the Phenom lists integrated graphics as a chipset feature on certain motherboards. The Opteron's market segment is Server/Workstation; the Phenom's is Desktop. The Opteron launched with an MSRP of $125, while the Phenom has no launch MSRP listed. The Opteron's release date is 2011-11-13, and the Phenom's is 2010-12-06. Both have locked multipliers and are end-of-life products.
FAQ
Q: Which processor is faster in multi-core workloads?
A: The AMD Opteron 4226 wins all three multi-core benchmarks. It scores 291 in Cinebench R15, 1213 in R20, and 2890 in R23, versus 290, 1212, and 2888 respectively for the Phenom II X6 1065T. The deltas are 0.3%, 0.1%, and 0.1%.
Q: How do the single-core performances compare?
A: The Opteron 4226 also leads in single-core tests. It scores 171 in Cinebench R20 single-core and 408 in R23 single-core, against 170 and 407 for the Phenom. The largest gap is 0.6% in R20 single-core.
Q: Do the two chips have the same number of cores and threads?
A: Yes. Both the AMD Opteron 4226 and the AMD Phenom II X6 1065T have 6 cores and 6 threads.
Q: What is the power consumption difference?
A: The Opteron 4226 has a TDP of 95 watts, while the Phenom II X6 1065T has a TDP of 125 watts. This means the Opteron draws 30 watts less under load, despite having similar performance.
Q: Which processor has more cache?
A: The Opteron 4226 has a larger L3 cache at 8 MB shared, compared to 6 MB shared for the Phenom. The Opteron also has 6 MB of L2 cache total, while the Phenom has 512 KB per core, which totals approximately 3 MB across six cores.
Q: Are these processors compatible with the same motherboards?
A: No. The Opteron 4226 uses AMD Socket C32, while the Phenom II X6 1065T uses AMD Socket AM3. They are not interchangeable between platforms.
Where Each One Wins
The AMD Opteron 4226 wins every benchmark in this comparison, but the margins are so small that its victories are symbolic rather than practical. The Opteron's strongest showing is a 0.6% lead in Cinebench R20 single-core, where it scores 171 versus 170. In all other tests, the lead is 0.1% to 0.3%. The Opteron also holds advantages in memory bandwidth (25.6 GB/s vs 21.3 GB/s), L3 cache size (8 MB vs 6 MB), and power efficiency (95 W TDP vs 125 W). These factors make the Opteron the technically superior choice for server/workstation environments where lower power consumption and higher memory throughput matter, even if the raw compute scores are nearly identical.
The AMD Phenom II X6 1065T wins no benchmarks outright, but it holds its own through near-parity. It matches the Opteron within 0.1% in Cinebench R20 multicore and R23 multicore, and within 0.2% in R23 single-core. The Phenom's higher base and boost clocks (2.90 GHz base, 3.40 GHz boost versus 2.70 GHz and 3.10 GHz) likely explain why it keeps pace despite the Opteron's architectural advantages. The Phenom also supports both DDR2 and DDR3 memory, offering flexibility for desktop systems with older memory infrastructure. Its integrated graphics capability via certain motherboards' chipsets provides a display output option that the Opteron entirely lacks. For desktop users already on Socket AM3, the Phenom's performance is statistically indistinguishable from the Opteron's, making it the practical choice for that platform. The Opteron's wins are consistent but so marginal that they only matter in scenarios where every fraction of a percent counts, such as tightly bound server workloads running many instances of the same benchmark.