AMD EPYC 7551P vs Intel Xeon Platinum 8180M Comparison

AMD
AMD

AMD EPYC 7551P

CORE STATE Naples
CORE SPECS 32 Cores / 64 Threads
CLOCK SPEED 2000 Base / 3 GHz Turbo
CACHE 64 MB (shared)
MAX TDP 180W
ARCHITECTURE Zen
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
Intel
INTEL

Xeon Platinum 8180M

CORE STATE Skylake-SP
CORE SPECS 28 Cores / 56 Threads
CLOCK SPEED 2.5 Base / 3.8 GHz Turbo
CACHE 38.5 MB (shared)
MAX TDP 205W
ARCHITECTURE Skylake
nm
PROCESS 14 nm
LAUNCH DATE 2017

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
3,276
2,826
cinebench_cinebench_r15_singlecore
462
398
cinebench_cinebench_r20_multicore
13,650
11,776
cinebench_cinebench_r20_singlecore
1,926
1,662
cinebench_cinebench_r23_multicore
32,500
28,040
cinebench_cinebench_r23_singlecore
4,588
3,958
geekbench_multicore
6,296
N/A
geekbench_singlecore
919
N/A

Analysis: AMD EPYC 7551P vs Intel Xeon Platinum 8180M

# Intel Xeon Platinum 8180M vs AMD EPYC 7551P

The benchmark data presents a clear and consistent picture: the AMD EPYC 7551P wins every single head-to-head benchmark in this comparison, across both multi-core and single-core workloads. The Intel Xeon Platinum 8180M, despite being a 28-core Skylake-SP part with a higher boost clock, trails the 32-core Naples-based EPYC in every Cinebench test by a remarkably uniform margin of roughly 13.7-13.9%. This consistency in the delta across all tests suggests a fundamental architectural and configuration advantage for the AMD part rather than a workload-specific quirk.

Where Each One Wins

The AMD EPYC 7551P is the outright winner in every benchmark category tested. In multi-core Cinebench R23, it scores 32,500 against the Xeon's 28,040, a 13.7% advantage. The single-core R23 result shows the same pattern: 4,588 for the EPYC versus 3,958 for the Xeon, a 13.7% gap. This is not a case of one part winning heavily in threaded workloads while the other takes single-threaded; the EPYC dominates both. The EPYC also holds a Geekbench score of 6,296 multi-core and 919 single-core, though the Xeon 8180M has no Geekbench result listed to compare.

The Intel Xeon Platinum 8180M does not win any of the six head-to-head benchmarks. Its strongest showing relative to the EPYC is in multi-core R23, where it still loses by the same 13.7% margin. However, the Xeon's average benchmark score across all listed tests is 8,110, which is slightly higher than the EPYC's 7,952 average. This average is skewed because the Xeon has fewer benchmark entries (six Cinebench tests) versus the EPYC's eight (six Cinebench plus two Geekbench). The EPYC's Geekbench scores are lower on an absolute scale, pulling its average down. In direct competition, the EPYC is faster.

The percentile ranking against all CPUs is identical for both: the 64th percentile. This means that despite the EPYC's clear victory in head-to-head tests, both processors sit at the same overall performance tier relative to the broader CPU landscape. The data suggests that in a mixed workload environment, the two parts are comparable in overall standing, but in the specific Cinebench workloads measured, the EPYC consistently outperforms.

Architecture Differences

The two processors come from different architectural lineages. The Intel Xeon Platinum 8180M is built on the Skylake-SP architecture, fabricated on Intel's 14 nm process with 8,000 million transistors. It features 28 cores and 56 threads, with a base clock of 2.50 GHz and a boost clock of 3.80 GHz. Its cache hierarchy is configured with 64 KB of L1 per core, 1 MB of L2 per core, and a shared 38.5 MB L3 cache. The Xeon supports DDR4 memory with ECC enabled, and it uses the Intel Socket 3647.

The AMD EPYC 7551P belongs to the EPYC 7001 series, using the Zen architecture with the codename Naples. It is also built on a 14 nm process, but at GlobalFoundries, with 4,800 million transistors and a die size of 213 mm². The EPYC packs 32 cores and 64 threads, with a base clock of 2.00 GHz and a boost clock of 3.00 GHz. Its cache layout differs significantly: 96 KB of L1 per core, 512 KB of L2 per core, and a much larger shared L3 of 64 MB. The EPYC supports DDR4 memory with ECC, utilizes an eight-channel memory bus, and offers a memory bandwidth of 170.6 GB/s. It uses the AMD Socket SP3 and has PCIe Gen 3 support.

The core count difference is the most obvious factor: 32 cores versus 28. However, the Intel part has a substantial clock advantage, with a 3.80 GHz boost versus the EPYC's 3.00 GHz. Despite this, the EPYC wins every benchmark. The larger L3 cache (64 MB versus 38.5 MB) and the eight-channel memory bus with higher bandwidth likely contribute to the EPYC's superior performance in these workloads. The Intel part also has a higher TDP at 205 watts versus the EPYC's 180 watts, meaning the EPYC achieves better performance with lower power draw according to the specifications. The AMD part is also multiplier unlocked, while the Intel part is locked. The EPYC's production status is listed as Active; the Xeon's status is not specified.

The Verdict

The data is unambiguous: the AMD EPYC 7551P is the faster processor across every benchmark tested. If the selection criterion is raw performance in Cinebench R15, R20, or R23, whether single-core or multi-core, the EPYC 7551P is the correct choice. The 13.7% consistent lead in multi-core tests and the 13.9% lead in the R15 single-core test demonstrate that the EPYC's architectural advantages—more cores, larger L3 cache, and wider memory bus—outweigh the Xeon's higher clock speeds.

For workloads that resemble these Cinebench tests, which are representative of rendering and general CPU compute, the EPYC 7551P is the superior part. The Xeon Platinum 8180M does have a higher boost clock of 3.80 GHz, which might suggest an advantage in lightly threaded, latency-sensitive tasks, but the single-core benchmark results show the opposite: the EPYC wins single-core R15, R20, and R23 by the same margin. There is no benchmark in the data where the Xeon comes out ahead.

The choice is straightforward. If the workload is similar to the tested benchmarks, the AMD EPYC 7551P should be selected. The Intel Xeon Platinum 8180M offers no performance advantage in any measured category. However, both parts sit at the 64th percentile of all CPUs, indicating that in the broader ecosystem, they are peers in overall standing. For a specific deployment where the EPYC's 32 cores, 64 MB L3, and eight-channel memory are beneficial, it wins.

FAQ

Q: Which processor is faster in multi-core Cinebench R23?

A: The AMD EPYC 7551P scores 32,500 versus the Intel Xeon Platinum 8180M's 28,040, giving the EPYC a 13.7% advantage.

Q: Does the Intel Xeon Platinum 8180M win any benchmark?

A: No. In the six head-to-head benchmarks listed (Cinebench R15, R20, and R23, each in single-core and multi-core), the EPYC 7551P wins all of them.

Q: How do the core counts compare?

A: The Intel Xeon Platinum 8180M has 28 cores and 56 threads, while the AMD EPYC 7551P has 32 cores and 64 threads.

Q: What is the memory bandwidth of the AMD EPYC 7551P?

A: The EPYC 7551P has an eight-channel memory bus with a memory bandwidth of 170.6 GB/s. The Xeon 8180M's memory bandwidth is not specified in the data.

Q: Are both processors on the same manufacturing process?

A: Yes, both are built on a 14 nm process. The Intel part is fabricated by Intel, while the EPYC is fabricated by GlobalFoundries.

Q: What is the average benchmark score for each processor?

A: The Intel Xeon Platinum 8180M has an average benchmark score of 8,110, and the AMD EPYC 7551P has an average of 7,952. This average is based on different numbers of tests for each part.

Head-to-Head Benchmarks

The head-to-head data is remarkable for its consistency. In Cinebench R15 multi-core, the EPYC 7551P scores 3,276 against the Xeon's 2,826, a delta of -13.7%. The single-core R15 test shows 462 versus 398, a delta of -13.9%. These are the only two benchmarks with slightly different deltas; the remaining four all show exactly -13.7%.

In Cinebench R20 multi-core, the EPYC scores 13,650 versus the Xeon's 11,776. The single-core R20 result is 1,926 versus 1,662. Both show a -13.7% delta. Cinebench R23 multi-core follows with 32,500 versus 28,040, and single-core with 4,588 versus 3,958, again both at -13.7%.

This uniformity is striking. A 13.7% performance gap across different generations of the Cinebench suite and across both single-threaded and multi-threaded tests indicates that the EPYC's advantage is not workload-dependent. It is not a case of the EPYC's extra cores helping in multi-core but falling behind in single-core; the EPYC wins both by the same proportion. The single-core wins are particularly notable because the Xeon has a 3.80 GHz boost clock versus the EPYC's 3.00 GHz. The EPYC's 13.9% lead in R15 single-core, despite an 800 MHz deficit in boost clock, points to a significant per-clock efficiency advantage for the Zen architecture in this test, along with the benefits of its larger L3 cache.

The EPYC also has a Geekbench multi-core score of 6,296 and a single-core score of 919, but the Xeon has no Geekbench results in the data, so no direct comparison can be made there. The wins A and wins B counters confirm the sweep: 0 wins for the Xeon, 6 for the EPYC. In every measurable head-to-head metric, the AMD EPYC 7551P is the faster part, and the margin is consistent enough to suggest that this performance relationship will hold across similar workloads.

DETAILED SPECIFICATIONS

SPECIFICATION
EPYC 7551P
Platinum 8180M
Core Specs
Cores
32
28 -12.5%
Threads
64
56 -12.5%
Base Clock (GHz)
2,000
2.5 -99.9%
Boost Clock (GHz)
3
3.8 +26.7%
Frequency (GHz)
2,000
2.5 -99.9%
Turbo Clock (GHz)
3
3.8 +26.7%
Multiplier
20
25 +25.0%
SMP CPUs
1
8 +700.0%
Cache
L1 Cache
96 KB (per core)
64 KB (per core)
L2 Cache
512 KB (per core)
1 MB (per core)
L3 Cache
64 MB (shared)
38.5 MB (shared)
Power
TDP (W)
180
205 +13.9%
Architecture
Architecture
Zen
Skylake
Codename
Naples
Skylake-SP
Generation
EPYC (Zen (Naples))
Xeon Platinum (Skylake-SP)
Process Size
14 nm
14 nm
Transistors
4,800 million
8,000 million
Die Size
213 mm²
—
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR4
DDR4
Memory Bus
Eight-channel
—
Memory Bandwidth
170.6 GB/s
—
ECC Memory
Yes
Yes
Platform
Socket
AMD Socket SP3
Intel Socket 3647
PCIe
Gen 3
—
Other
Market
Server/Workstation
Server/Workstation
Production Status
Active
—
Part Number
PS755PBDVIHAF
—
Package
FCLGA-4094
FC-LGA3647
View EPYC 7551P Details View Xeon Platinum 8180M Details