AMD Athlon X4 950 vs Intel Core i7-2760QM Comparison

AMD
AMD

AMD Athlon X4 950

CORE STATE Bristol Ridge
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 3.5 Base / 3.8 GHz Turbo
CACHE —
MAX TDP 65W
ARCHITECTURE Excavator
nm
PROCESS 28 nm
LAUNCH DATE 2017
VS
Intel
INTEL

Core i7-2760QM

CORE STATE Sandy Bridge
CORE SPECS 4 Cores / 8 Threads
CLOCK SPEED 2.4 Base / 3.5 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 45W
ARCHITECTURE Sandy Bridge
nm
PROCESS 32 nm
LAUNCH DATE 2011

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
306
366
cinebench_cinebench_r20_multicore
1,277
1,525
cinebench_cinebench_r20_singlecore
180
215
cinebench_cinebench_r23_multicore
3,041
3,631
cinebench_cinebench_r23_singlecore
429
512
cinebench_cinebench_r15_singlecore
N/A
51
geekbench_multicore
N/A
1,625
geekbench_singlecore
N/A
534

Analysis: AMD Athlon X4 950 vs Intel Core i7-2760QM

The Intel Core i7-2760QM and AMD Athlon X4 950 represent two very different approaches to quad-core computing, separated by six years of design philosophy. The data shows a surprisingly consistent performance gap across every shared benchmark, with the older Intel mobile part outperforming the newer AMD desktop chip by roughly 19% in all measured tests. This consistency is remarkable, suggesting a fundamental architectural advantage rather than a workload-specific quirk.

Head-to-Head Benchmarks

The head-to-head results tell a clear story of Intel dominance. In Cinebench R15 multi-core, the i7-2760QM scores 366 against the Athlon's 306, a 19.6% delta — the largest margin in any test. The pattern holds almost identically across the board: Cinebench R20 multi-core shows 1525 vs 1277 (19.4% advantage), while R23 multi-core delivers 3631 vs 3041, again 19.4% ahead. Single-core results mirror this exact gap, with R20 single-core at 215 vs 180 and R23 single-core at 512 vs 429, both showing 19.4% and 19.3% deltas respectively.

What makes this particularly interesting is that the Athlon X4 950 has significantly higher clock speeds. The AMD part runs at a 3.50 GHz base clock with a 3.80 GHz boost, while the Intel chip starts at just 2.40 GHz and boosts to 3.50 GHz. Despite the raw clock disadvantage, the i7-2760QM wins every single benchmark by nearly one-fifth. This points to IPC (instructions per cycle) superiority in the Sandy Bridge architecture, or perhaps the benefit of simultaneous multithreading (8 threads vs 4) in multi-core tests. Yet even in single-core tests, where thread count shouldn't matter, the Intel chip wins by the same margin — suggesting the architectural efficiency gap is real and consistent.

The average benchmark scores tell a similar story: the i7-2760QM averages 1057 across all tests, while the Athlon X4 950 averages 1047. Both CPUs sit at the 29th percentile of all CPUs tracked, placing them in the same performance tier overall. The nearest rivals confirm this positioning — the Intel chip trades blows within 0.2% of the Pentium G4600, Ryzen 5 2500U, Core i3-4350, and FX-8320E, while the Athlon sits within 0.2% of the PRO A10-8770, Core i5-6350HQ, PRO A10-9700, and Pentium Gold G5620.

Where Each One Wins

Looking strictly at the data, the Intel Core i7-2760QM wins every head-to-head benchmark — all five tests, with zero wins for the Athlon. This is a clean sweep, but the practical implications deserve examination. The Intel chip's wins span both multi-core and single-core workloads, meaning it should excel in everything from heavily threaded rendering tasks to lightly threaded everyday applications.

The Athlon X4 950's advantages lie outside the benchmark suite. It's a desktop part on the AMD Socket AM4 platform, which means it supports DDR4 memory with a 38.4 GB/s memory bandwidth figure stated in the specs. The Intel chip's memory support field is not specified, though it uses dual-channel memory. The Athlon also has an active production status, while the Intel chip is end-of-life. For a system builder, the Athlon's platform currency could be a practical win even if its raw compute performance trails.

In threaded workloads specifically, the i7-2760QM's 8 threads give it a theoretical scheduling advantage over the Athlon's 4 threads. The consistent ~19% margin in multi-core tests likely reflects this, though the similar margin in single-core tests suggests thread count alone doesn't explain the entire gap. The data implies the Intel core design itself is simply more efficient per clock.

Architecture Differences

The architectural divide here is stark. The Intel Core i7-2760QM uses the Sandy Bridge architecture on a 32 nm process, fabricated by Intel with 1,160 million transistors on a 216 mm² die. The AMD Athlon X4 950 uses the older Excavator architecture (codenamed Bristol Ridge) on a 28 nm process from GlobalFoundries, packing 3,100 million transistors into a 250 mm² die. That's nearly three times the transistor count on a slightly larger die, yet the AMD chip still loses consistently.

Cache configurations differ dramatically. The Intel chip has a three-level hierarchy: 64 KB L1 per core, 256 KB L2 per core, and 6 MB shared L3. The AMD part lists 320 KB L1 total and 2 MB L2 total, with no L3 cache at all. The lack of a shared L3 cache on the Athlon could explain its multi-core deficit — the Intel chip's 6 MB shared pool allows cores to exchange data more efficiently.

The integrated graphics also separate them: the i7-2760QM includes Intel HD 3000, while the Athlon X4 950 has no integrated graphics specified. The Intel chip is a mobile part on Intel BGA 1224 with a 45 W TDP, while the Athlon is a desktop chip on AMD Socket AM4 with a 65 W TDP. The Athlon supports DDR4 memory and offers PCIe Gen 3 with 8 CPU lanes, while the Intel chip's PCIe support is unspecified. Neither chip has ECC memory support or an unlocked multiplier.

FAQ

Q: Which processor has more threads?

A: The Intel Core i7-2760QM has 8 threads (4 cores with Hyper-Threading), while the AMD Athlon X4 950 has 4 threads (4 cores without SMT).

Q: Does the AMD Athlon X4 950 have integrated graphics?

A: No, the specification list shows no integrated graphics for the Athlon X4 950. The Intel Core i7-2760QM includes Intel HD 3000 integrated graphics.

Q: How do they compare in single-core performance?

A: The Intel chip wins single-core tests by roughly 19%. In Cinebench R23 single-core, the i7-2760QM scores 512 vs the Athlon's 429, a 19.3% difference. Cinebench R20 single-core shows 215 vs 180, a 19.4% margin.

Q: Which CPU has the higher clock speed?

A: The AMD Athlon X4 950 has a 3.50 GHz base clock and 3.80 GHz boost clock, compared to the Intel's 2.40 GHz base and 3.50 GHz boost. Despite the clock advantage, the Intel chip wins all benchmarks.

Q: Are these processors in the same performance percentile?

A: Yes, both sit at the 29th percentile of all CPUs, with average benchmark scores of 1057 for Intel and 1047 for AMD.

Q: Do both processors support ECC memory?

A: No, neither CPU supports ECC memory according to the specification data.

The Verdict

The benchmark data is unambiguous: the Intel Core i7-2760QM is the faster processor in every measured workload, with a consistent ~19% lead across single-core and multi-core tests. This is particularly notable given that the Intel chip is a 2011 mobile processor while the AMD part is a 2017 desktop chip with higher clocks and a more modern platform. The i7-2760QM's 8 threads, 6 MB L3 cache, and superior per-core efficiency combine to overcome the Athlon's clock speed advantage.

However, the Athlon X4 950 offers platform advantages that the benchmarks don't capture. It's an active, currently-produced desktop part on the AM4 socket, supporting DDR4 memory with 38.4 GB/s bandwidth and PCIe Gen 3. The Intel chip is end-of-life, mobile-only, and lacks modern memory support. For someone building a new desktop system today, the Athlon's platform viability might outweigh its compute deficit — but for raw processing power, the data says Intel wins decisively.

Users who prioritize multi-threaded productivity, single-core responsiveness, or integrated graphics should choose the i7-2760QM based on its benchmark superiority. Users who need a current, actively-produced desktop platform with DDR4 support and PCIe Gen 3 should consider the Athlon X4 950, accepting its lower performance in exchange for platform currency.

Specification Differences

| Specification | Intel Core i7-2760QM | AMD Athlon X4 950 |

|---|---|---|

| Cores / Threads | 4 / 8 | 4 / 4 |

| Base Clock | 2.40 GHz | 3.50 GHz |

| Boost Clock | 3.50 GHz | 3.80 GHz |

| TDP | 45 W | 65 W |

| Socket | Intel BGA 1224 | AMD Socket AM4 |

| Architecture | Sandy Bridge | Excavator (Bristol Ridge) |

| Process Node | 32 nm | 28 nm |

| Foundry | Intel | GlobalFoundries |

| Transistors | 1,160 million | 3,100 million |

| Die Size | 216 mm² | 250 mm² |

| L1 Cache | 64 KB (per core) | 320 KB |

| L2 Cache | 256 KB (per core) | 2 MB |

| L3 Cache | 6 MB (shared) | None |

| Memory Support | Not specified | DDR4 |

| Memory Bandwidth | Not specified | 38.4 GB/s |

| PCIe | Not specified | Gen 3, 8 Lanes (CPU only) |

| Integrated Graphics | Intel HD 3000 | None |

| Market Segment | Mobile | Desktop |

| Production Status | End-of-life | Active |

| Release Date | 2011-09-03 | 2017-07-26 |

| Multiplier Unlocked | No | No |

DETAILED SPECIFICATIONS

SPECIFICATION
Athlon X4 950
i7-2760QM
Core Specs
Cores
4
4 0.0%
Threads
4
8 +100.0%
Base Clock (GHz)
3.5
2.4 -31.4%
Boost Clock (GHz)
3.8
3.5 -7.9%
Frequency (GHz)
3.5
2.4 -31.4%
Turbo Clock (GHz)
3.8
3.5 -7.9%
Multiplier
35
24 -31.4%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
320 KB
64 KB (per core)
L2 Cache
2 MB
256 KB (per core)
L3 Cache
—
6 MB (shared)
Power
TDP (W)
65
45 -30.8%
Architecture
Architecture
Excavator
Sandy Bridge
Codename
Bristol Ridge
Sandy Bridge
Generation
Athlon (Bristol Ridge)
Core i7 (Sandy Bridge)
Process Size
28 nm
32 nm
Transistors
3,100 million
1,160 million
Die Size
250 mm²
216 mm²
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR4
—
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
38.4 GB/s
—
ECC Memory
No
No
Platform
Socket
AMD Socket AM4
Intel BGA 1224
Chipsets
X370, B350, A320
—
PCIe
Gen 3, 8 Lanes(CPU only)
—
Graphics
Integrated Graphics
—
Intel HD 3000
Other
Market
Desktop
Mobile
Production Status
Active
End-of-life
Part Number
AD950XAGM44AB
SR02R
Package
µOPGA-1331
BGA2
Tj Max
90°C
—
View Athlon X4 950 Details View Core i7-2760QM Details