AMD Athlon X4 880K vs Intel Core i3-9100HL Comparison

AMD
AMD

AMD Athlon X4 880K

CORE STATE Godaveri
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 4 Base / 4.2 GHz Turbo
CACHE —
MAX TDP 95W
ARCHITECTURE Steamroller
nm
PROCESS 28 nm
LAUNCH DATE —
VS
Intel
INTEL

Core i3-9100HL

CORE STATE Coffee Lake
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 1600 Base / 2.9 GHz Turbo
CACHE 6 MB (shared)
MAX TDP 25W
ARCHITECTURE Coffee Lake
nm
PROCESS 14 nm
LAUNCH DATE 2019

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
313
311
cinebench_cinebench_r20_multicore
1,307
1,299
cinebench_cinebench_r20_singlecore
184
183
cinebench_cinebench_r23_multicore
3,114
3,094
cinebench_cinebench_r23_singlecore
439
436

Analysis: AMD Athlon X4 880K vs Intel Core i3-9100HL

Head-to-Head Benchmarks

The benchmark data shows a remarkably consistent, if narrow, victory for the AMD Athlon X4 880K across every tested workload. In the five Cinebench comparisons, the AMD part wins all five, with the Intel Core i3-9100HL failing to take a single test. The margins, however, are slim, ranging from 0.5% to 0.7%. This is not a case of one chip decisively outclassing the other, but rather a pattern of small, repeatable advantages for the AMD processor.

Starting with multi-core performance, the Athlon X4 880K scores 313 in Cinebench R15 multicore against the i3-9100HL’s 311, a 0.6% lead. The gap holds steady in Cinebench R20 multicore, where the AMD chip posts 1307 versus 1299, again a 0.6% delta. The Cinebench R23 multicore result follows the same script: 3114 for the Athlon versus 3094 for the Intel part, a 0.6% advantage. These three results tell a coherent story—the Athlon X4 880K sustains a roughly half-percent edge in threaded workloads, regardless of the Cinebench version. The consistency across R15, R20, and R23 suggests the advantage is structural rather than an artifact of a single test build.

Single-core results are similarly tight. In Cinebench R20 singlecore, the Athlon scores 184 against the i3-9100HL’s 183, a 0.5% lead. Cinebench R23 singlecore shows the widest margin of the entire comparison: the AMD part hits 439, the Intel part 436, a 0.7% delta. While 0.7% is still a marginal difference, it is the largest relative win for either chip in this head-to-head. The fact that the Athlon wins single-core tests by a similar margin to its multi-core wins indicates that the performance gap is not dependent on thread scheduling or core count scaling, but rather reflects a fundamental per-thread throughput difference.

The overall average benchmark scores reinforce the picture. The Athlon X4 880K carries an average score of 1071, while the i3-9100HL sits at 1065. That difference of six points translates to the AMD chip’s 30th percentile ranking among all CPUs, versus the Intel chip’s 29th percentile. These percentile figures place both processors in the lower third of the CPU landscape, but the Athlon consistently edges ahead.

Looking at the nearest rivals for each chip provides additional context. The Athlon’s closest competitor is the AMD Opteron 3380, with an identical average score of 1071 and a delta of 0%. The Intel Core i5-5287U and Intel Core i3-4170T both score 1072, a 0.1% deficit for the Athlon, while the Intel Processor N95 scores 1070, a 0.1% advantage. For the i3-9100HL, the nearest rival is the Intel Xeon W3580 at 1064 (0.1% ahead of the i3), followed by the Core i5-2380P at 1063 (0.2% ahead), the Core i5-4570TE at 1062 (0.3% ahead), and the AMD Opteron 4376 HE at 1061 (0.4% ahead). The i3-9100HL is thus positioned slightly below the Athlon, but both chips inhabit the same performance tier, surrounded by older server and desktop parts.

FAQ

Q: Which processor wins in multi-core performance?

A: The AMD Athlon X4 880K wins in all three multi-core tests. It scores 313 versus 311 in Cinebench R15, 1307 versus 1299 in Cinebench R20, and 3114 versus 3094 in Cinebench R23. Each victory carries a 0.6% delta.

Q: Is the single-core performance difference larger than the multi-core difference?

A: Yes. In Cinebench R23 singlecore, the Athlon X4 880K leads by 0.7% (439 versus 436). In Cinebench R20 singlecore, the lead is 0.5% (184 versus 183). The multi-core margins are all 0.6%, so the single-core R23 result is the widest gap in the entire comparison.

Q: How do the overall average benchmark scores compare?

A: The Athlon X4 880K has an average benchmark score of 1071, which is higher than the i3-9100HL’s 1065. The Athlon ranks in the 30th percentile of all CPUs, while the i3-9100HL ranks in the 29th percentile.

Q: What are the closest rivals to each chip in the broader market?

A: The Athlon X4 880K’s nearest rival is the AMD Opteron 3380 with an identical average score of 1071. The i3-9100HL’s nearest rival is the Intel Xeon W3580 at 1064, which is 0.1% behind the i3’s score.

Q: Does the Intel chip have any benchmark where it outperforms the AMD chip?

A: No. The head-to-head data shows the AMD Athlon X4 880K winning all five benchmarks (Cinebench R15 multicore, R20 multicore, R20 singlecore, R23 multicore, R23 singlecore). The Intel Core i3-9100HL records zero wins.

Architecture Differences

The two processors are built on fundamentally different architectures and process technologies. The AMD Athlon X4 880K uses the Steamroller architecture, codenamed Godaveri, fabricated on a 28 nm process at GlobalFoundries. The Intel Core i3-9100HL uses the Coffee Lake architecture, also codenamed Coffee Lake, fabricated on a 14 nm process at Intel. The AMD chip is the older design, and the process node difference—28 nm versus 14 nm—is substantial, though the benchmark results do not reflect a corresponding performance gap.

Both chips feature four cores and four threads, so neither has an advantage in core count or simultaneous multithreading. The AMD part has a base clock of 4.00 GHz and a boost clock of 4.20 GHz. The Intel part has a base clock of 1600.00 MHz (1.60 GHz) and a boost clock of 2.90 GHz. The raw clock speed difference is large—the Athlon’s base clock is more than double the i3’s base clock—yet the benchmark scores are nearly identical. This suggests that the Intel architecture extracts significantly more instructions per clock, compensating for its much lower operating frequency.

Cache configurations differ markedly. The Athlon X4 880K has 256 KB of L1 cache and 4 MB of L2 cache, with no L3 cache at all. The i3-9100HL has 64 KB of L1 cache per core (totaling 256 KB), 256 KB of L2 cache per core (totaling 1 MB), and 6 MB of shared L3 cache. The presence of L3 cache on the Intel part is a notable architectural advantage, providing a larger on-die pool for frequently accessed data. Yet again, this advantage does not translate into a benchmark win.

Memory support is another area of divergence. The Athlon uses DDR3 memory with a dual-channel bus and a memory bandwidth of 34.1 GB/s. The i3-9100HL uses DDR4 memory with a dual-channel bus and a memory bandwidth of 42.7 GB/s. The Intel chip offers roughly 25% more memory bandwidth on paper, but the Cinebench workloads do not appear to be bandwidth-limited for either part.

The integrated graphics situation is asymmetric. The i3-9100HL includes Intel UHD Graphics 630, while the Athlon X4 880K has no integrated graphics listed. This means the Intel part can power a display without a discrete GPU, while the AMD part requires a separate graphics card. The Intel chip also supports ECC memory, a feature absent on the AMD chip. The Athlon, however, has an unlocked multiplier, making it a candidate for overclocking, whereas the i3-9100HL has a locked multiplier.

Physical characteristics also differ. The Athlon has a die size of 245 mm² and contains 2,411 million transistors. The i3-9100HL has a die size of 126 mm², with transistor count not listed. The Athlon’s die is nearly double the size of the Intel chip’s die, which is consistent with the older, less dense 28 nm process. The sockets are incompatible: the Athlon uses AMD Socket FM2+, while the i3-9100HL uses Intel BGA 1440.

The Verdict

The data presents a clear, if narrow, winner: the AMD Athlon X4 880K outperforms the Intel Core i3-9100HL in every benchmark recorded. The margins are small—never exceeding 0.7%—but they are uniform across five different Cinebench tests. The Athlon’s average benchmark score of 1071 exceeds the i3’s 1065, and the percentile rankings (30th versus 29th) reflect that same ordering. For any workload represented by Cinebench, the AMD part is the faster choice.

The context, however, matters. Both chips are end-of-life products, and both sit in the lower third of CPU performance rankings. The Athlon X4 880K achieves its wins through raw clock speed—a 4.20 GHz boost versus the i3’s 2.90 GHz—while the i3-9100HL compensates with a more modern 14 nm architecture and a 6 MB L3 cache. The result is a statistical tie in real-world terms, with the Athlon’s advantage being consistent but practically negligible.

The Intel Core i3-9100HL offers features the Athlon lacks, which may sway a purchasing decision despite the benchmark deficit. The i3-9100HL includes integrated UHD Graphics 630, supports ECC memory, and uses DDR4 memory with higher bandwidth. It also has a much lower TDP of 25 watts versus the Athlon’s 95 watts, making it a more power-efficient choice for thermally constrained systems. The Athlon counters with an unlocked multiplier, enabling overclocking headroom that the locked i3 cannot provide.

Buyers prioritizing raw benchmark performance should choose the AMD Athlon X4 880K, as it wins all five tests and holds a higher average score. Buyers prioritizing power efficiency, integrated graphics, ECC memory support, or newer memory technology should choose the Intel Core i3-9100HL, accepting a marginal performance trade-off. The data does not support a decisive victory for either part; it supports a narrow performance edge for AMD and a broader feature set for Intel.

Specification Differences

| Specification | AMD Athlon X4 880K | Intel Core i3-9100HL |

|---|---|---|

| Architecture | Steamroller | Coffee Lake |

| Codename | Godaveri | Coffee Lake |

| Process Node | 28 nm | 14 nm |

| Foundry | GlobalFoundries | Intel |

| Base Clock | 4.00 GHz | 1600.00 MHz |

| Boost Clock | 4.20 GHz | 2.90 GHz |

| TDP | 95 W | 25 W |

| Socket | AMD Socket FM2+ | Intel BGA 1440 |

| Die Size | 245 mm² | 126 mm² |

| Transistors | 2,411 million | Not listed |

| L1 Cache | 256 KB | 64 KB (per core) |

| L2 Cache | 4 MB | 256 KB (per core) |

| L3 Cache | None | 6 MB (shared) |

| Memory Support | DDR3 | DDR4 |

| Memory Bandwidth | 34.1 GB/s | 42.7 GB/s |

| ECC Memory | No | Yes |

| Integrated Graphics | None | UHD Graphics 630 |

| Multiplier Unlocked | Yes | No |

| Launch MSRP | Not listed | $225 |

| Release Date | Not listed | 2019-03-31 |

DETAILED SPECIFICATIONS

SPECIFICATION
Athlon X4 880K
i3-9100HL
Core Specs
Cores
4
4 0.0%
Threads
4
4 0.0%
Base Clock (GHz)
4
1,600 +39900.0%
Boost Clock (GHz)
4.2
2.9 -31.0%
Frequency (GHz)
4
1,600 +39900.0%
Turbo Clock (GHz)
4.2
2.9 -31.0%
Multiplier
40
16 -60.0%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
256 KB
64 KB (per core)
L2 Cache
4 MB
256 KB (per core)
L3 Cache
—
6 MB (shared)
Power
TDP (W)
95
25 -73.7%
Architecture
Architecture
Steamroller
Coffee Lake
Codename
Godaveri
Coffee Lake
Generation
Athlon (Godaveri)
Core i3 (Coffee Lake Refresh)
Process Size
28 nm
14 nm
Transistors
2,411 million
—
Die Size
245 mm²
126 mm²
Foundry
GlobalFoundries
Intel
Memory
Memory Support
DDR3
DDR4
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
34.1 GB/s
42.7 GB/s
ECC Memory
No
Yes
Platform
Socket
AMD Socket FM2+
Intel BGA 1440
Chipsets
A88X, A85X, A78, A75, A68H
—
PCIe
Gen 3, 16 Lanes(CPU only)
Gen 3, 16 Lanes(CPU only)
Graphics
Integrated Graphics
—
UHD Graphics 630
Other
Market
Desktop
Desktop
Production Status
End-of-life
End-of-life
Launch Price
—
$225
Part Number
AD880KXBJCSBX
SRFEK
Package
µPGA
FC-BGA
Tj Max
—
100°C
View Athlon X4 880K Details View Core i3-9100HL Details