AMD Athlon X4 880K vs AMD Opteron 3380 Comparison

AMD
AMD

AMD Athlon X4 880K

CORE STATE Godaveri
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 4 Base / 4.2 GHz Turbo
CACHE —
MAX TDP 95W
ARCHITECTURE Steamroller
nm
PROCESS 28 nm
LAUNCH DATE —
VS
AMD
AMD

Opteron 3380

CORE STATE Delhi
CORE SPECS 8 Cores / 8 Threads
CLOCK SPEED 2.6 Base / 3.6 GHz Turbo
CACHE 8 MB (shared)
MAX TDP 65W
ARCHITECTURE K10
nm
PROCESS 32 nm
LAUNCH DATE 2012

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
313
373
cinebench_cinebench_r20_multicore
1,307
1,555
cinebench_cinebench_r20_singlecore
184
219
cinebench_cinebench_r23_multicore
3,114
3,704
cinebench_cinebench_r23_singlecore
439
522
cinebench_cinebench_r15_singlecore
N/A
52

Analysis: AMD Athlon X4 880K vs AMD Opteron 3380

Head-to-Head Benchmarks

The benchmark data is unambiguous: the AMD Opteron 3380 wins every single head-to-head comparison, taking all five Cinebench tests outright. The Athlon X4 880K does not log a single victory, which makes this less of a rivalry and more of a rout. The Opteron 3380 leads by roughly 16% in every workload measured, with deltas of -16.1%, -15.9%, -16%, -15.9%, and -15.9% across the five tests. These are consistent margins, not isolated wins.

In Cinebench R15 multi-core, the Opteron 3380 scores 373 against the Athlon’s 313, a 60-point gap. That 16.1% advantage carries over to Cinebench R20 multi-core, where the Opteron posts 1555 versus 1307. The single-core results tell the same story: the Opteron 3380 hits 219 in Cinebench R20 single-core, while the Athlon X4 880K manages 184. In Cinebench R23, the Opteron leads 3704 to 3114 in multi-core and 522 to 439 in single-core. Every delta is nearly identical, hovering right around 16%, which suggests the Opteron’s advantage is structural rather than workload-specific.

The aggregate benchmarks reinforce this picture. Both CPUs have an identical average benchmark score of 1071, which explains why they appear as direct rivals in the database. The Athlon X4 880K sits at the 30th percentile of all CPUs, while the Opteron 3380 is at the 29th. That one-percentile difference is negligible in real terms, but the head-to-head results show the Opteron pulling ahead consistently. The nearest rivals for both are the Intel Core i5-5287U and Intel Core i3-4170T (both at 1072 average score, -0.1% delta) and the Intel Processor N95 (1070, +0.1% delta), which means these two AMD parts are firmly in the same performance class as those low-power Intel chips.

Architecture Differences

The two CPUs come from entirely different design lineages. The Athlon X4 880K uses AMD’s Steamroller architecture, codenamed Godaveri, built on a 28 nm process at GlobalFoundries. It packs 2,411 million transistors into a 245 mm² die. The Opteron 3380, by contrast, uses the older K10 architecture, codenamed Delhi, on a 32 nm process, with 1,200 million transistors spread across a larger 315 mm² die. The process node difference is significant: 28 nm versus 32 nm, which typically means better power efficiency per transistor for the newer part, though the Opteron’s lower TDP complicates that simple story.

Core counts differ sharply. The Athlon X4 880K has 4 cores and 4 threads, while the Opteron 3380 doubles that to 8 cores and 8 threads. That explains the Opteron’s multi-core wins despite its much lower clock speeds. The Athlon runs at a 4.00 GHz base clock and 4.20 GHz boost, while the Opteron is far more modest at 2.60 GHz base and 3.60 GHz boost. The Opteron’s 8 cores at lower clocks clearly outpace the Athlon’s 4 cores at higher clocks in threaded workloads.

Cache hierarchies diverge as well. The Athlon has 256 KB of L1 and 4 MB of L2, with no L3 cache at all. The Opteron ups L1 to 384 KB, L2 to 8 MB, and adds 8 MB of shared L3 cache. That extra cache capacity is a major factor in the Opteron’s consistent lead, especially in single-threaded tests where the Athlon’s higher clocks should have given it an edge but did not. Memory support is DDR3 dual-channel for both, but the Athlon has slightly higher theoretical bandwidth at 34.1 GB/s versus 29.9 GB/s for the Opteron. The Athlon also runs PCIe Gen 3 with 16 lanes from the CPU, while the Opteron is limited to PCIe Gen 2.

The socket situation is a hard divider. The Athlon X4 880K uses AMD Socket FM2+, while the Opteron 3380 uses AMD Socket AM3+. They are not interchangeable, so a motherboard choice locks you into one platform. The Opteron’s market segment is Server/Workstation, while the Athlon is a Desktop part. Both are end-of-life, but the Opteron has a documented release date of 2012-12-03, whereas the Athlon’s release date is absent from the data. The Athlon has an unlocked multiplier; the Opteron does not. The Opteron’s launch MSRP was $229, which can be stated once here as context, but no pricing commentary is warranted beyond that.

The Verdict

The data points one direction: the AMD Opteron 3380 is the better processor in every benchmark measured. It wins all five Cinebench tests by a nearly uniform margin of about 16%, whether the workload is single-core or multi-core. The Opteron’s 8 cores and 8 threads, combined with 8 MB of L3 cache, overcome the Athlon’s clock speed advantage of 4.00 GHz base versus 2.60 GHz. Even in single-threaded Cinebench R23, where the Athlon’s 4.20 GHz boost should theoretically shine, the Opteron still leads 522 to 439.

Who should pick the Athlon X4 880K? Strictly from the data, almost no one. It loses every benchmark, has no L3 cache, and its only advantages are a higher clock speed, a smaller die, and an unlocked multiplier. If overclocking is a priority, the unlocked multiplier is a genuine feature, but the Opteron’s locked multiplier means you cannot do the same. The Athlon also has a lower TDP at 95 watts versus the Opteron’s 65 watts, so the Opteron is actually more power-efficient despite having twice the cores.

Who should pick the Opteron 3380? Anyone who needs multi-threaded throughput, which the Cinebench results clearly reward. The Opteron’s 373 versus 313 in R15, 1555 versus 1307 in R20, and 3704 versus 3114 in R23 are all decisive. Its server/workstation heritage shows in the 8-core design and the shared L3 cache. The trade-off is platform: AM3+ versus FM2+, and PCIe Gen 2 versus Gen 3. If you are building fresh, the Opteron’s socket is older, but the performance data says it is the stronger chip.

Specification Differences

The two CPUs differ in nearly every major specification category. The Athlon X4 880K has 4 cores and 4 threads, while the Opteron 3380 has 8 cores and 8 threads. Base clocks are 4.00 GHz for the Athlon versus 2.60 GHz for the Opteron; boost clocks are 4.20 GHz versus 3.60 GHz. TDP is 95 watts for the Athlon and 65 watts for the Opteron, meaning the Opteron draws less power despite having twice the cores.

Architecture and process node are different: Steamroller on 28 nm for the Athlon, K10 on 32 nm for the Opteron. The Athlon uses 2,411 million transistors on a 245 mm² die, while the Opteron uses 1,200 million transistors on a 315 mm² die. Cache differs across all levels: L1 is 256 KB versus 384 KB, L2 is 4 MB versus 8 MB, and the Opteron adds 8 MB of shared L3 while the Athlon has none. Memory bandwidth favors the Athlon at 34.1 GB/s versus 29.9 GB/s, though both are dual-channel DDR3. PCIe is Gen 3 with 16 lanes for the Athlon, Gen 2 for the Opteron. The Opteron has integrated graphics available as a chipset feature on certain motherboards, while the Athlon has none listed. The Athlon’s multiplier is unlocked; the Opteron’s is not. Sockets are FM2+ versus AM3+. The Opteron has a release date of 2012-12-03 and a launch MSRP of $229; the Athlon has neither in the data.

FAQ

Q: Which CPU wins in multi-core performance?

A: The AMD Opteron 3380 wins all multi-core tests. In Cinebench R15, it scores 373 versus 313 for the Athlon X4 880K. In R20, it scores 1555 versus 1307. In R23, it scores 3704 versus 3114. Each win is by roughly 16%.

Q: Does the Athlon X4 880K win in single-core performance?

A: No. Despite a higher base clock of 4.00 GHz versus 2.60 GHz, the Athlon loses every single-core test. In Cinebench R20 single-core, the Opteron scores 219 versus 184. In R23 single-core, it scores 522 versus 439.

Q: What is the difference in core counts?

A: The Athlon X4 880K has 4 cores and 4 threads. The Opteron 3380 has 8 cores and 8 threads. This core advantage is the primary reason the Opteron wins all multi-threaded benchmarks.

Q: Do these CPUs support the same socket?

A: No. The Athlon X4 880K uses AMD Socket FM2+, while the Opteron 3380 uses AMD Socket AM3+. They are not cross-compatible, so motherboard choice is a hard constraint.

Q: Which CPU has more cache?

A: The Opteron 3380 has more cache at every level. It has 384 KB L1, 8 MB L2, and 8 MB of shared L3. The Athlon has 256 KB L1 and 4 MB L2, with no L3 cache.

Q: What is the power draw difference?

A: The Opteron 3380 has a TDP of 65 watts, while the Athlon X4 880K has a TDP of 95 watts. The Opteron uses less power despite having twice the cores.

Where Each One Wins

The Opteron 3380 wins everywhere in the benchmark suite. It takes all five Cinebench tests, with deltas of about 16% across the board. That includes both multi-core and single-core workloads, which is unusual. Normally, a higher-clocked CPU like the Athlon X4 880K would be expected to win at least the single-threaded tests. The data shows the opposite: the Opteron’s 522 single-core R23 score beats the Athlon’s 439 by 15.9%. The Opteron’s 8 MB of L3 cache likely compensates for its lower clock speed, giving it an edge even in lightly threaded work.

The Athlon X4 880K has no benchmark wins to claim. Its only potential advantages are qualitative, not measured in the data. It has an unlocked multiplier, which allows manual overclocking, and it uses a 28 nm process versus 32 nm, which suggests a more modern manufacturing node. It also has higher memory bandwidth at 34.1 GB/s versus 29.9 GB/s and PCIe Gen 3 versus Gen 2. But none of these translate into a single benchmark victory.

For use-case planning, the Opteron 3380 is the choice for any workload that scales with cores and threads. The 8-core, 8-thread design delivered consistent 16% wins in Cinebench, which is a proxy for rendering and other multi-threaded tasks. Its 65-watt TDP also makes it a more power-efficient option for always-on server or workstation duties. The Athlon X4 880K, with its unlocked multiplier, is the only option for overclocking enthusiasts, but the data offers no indication that overclocking would close a 16% gap. Without benchmark evidence of overclocked performance, the Opteron 3380 remains the data-backed recommendation for every measured workload.

DETAILED SPECIFICATIONS

SPECIFICATION
Athlon X4 880K
Opteron 3380
Core Specs
Cores
4
8 +100.0%
Threads
4
8 +100.0%
Base Clock (GHz)
4
2.6 -35.0%
Boost Clock (GHz)
4.2
3.6 -14.3%
Frequency (GHz)
4
2.6 -35.0%
Turbo Clock (GHz)
4.2
3.6 -14.3%
Multiplier
40
13 -67.5%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
256 KB
384 KB
L2 Cache
4 MB
8 MB
L3 Cache
—
8 MB (shared)
Power
TDP (W)
95
65 -31.6%
Architecture
Architecture
Steamroller
K10
Codename
Godaveri
Delhi
Generation
Athlon (Godaveri)
Opteron (Delhi)
Process Size
28 nm
32 nm
Transistors
2,411 million
1,200 million
Die Size
245 mm²
315 mm²
Foundry
GlobalFoundries
—
Memory
Memory Support
DDR3
DDR3
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
34.1 GB/s
29.9 GB/s
ECC Memory
No
No
Platform
Socket
AMD Socket FM2+
AMD Socket AM3+
Chipsets
A88X, A85X, A78, A75, A68H
AMD 700 Series, AMD 800 Series, AMD 900 Series
PCIe
Gen 3, 16 Lanes(CPU only)
Gen 2
Graphics
Integrated Graphics
—
On certain motherboards (Chipset feature)
Other
Market
Desktop
Server/Workstation
Production Status
End-of-life
End-of-life
Launch Price
—
$229
Part Number
AD880KXBJCSBX
OS3380OLW8KHK
Package
µPGA
µPGA
Tj Max
—
70°C
View Athlon X4 880K Details View Opteron 3380 Details