AMD Athlon X4 860K vs Intel Core i5-4330M Comparison
AMD Athlon X4 860K
Core i5-4330M
PERFORMANCE BENCHMARKS
Analysis: AMD Athlon X4 860K vs Intel Core i5-4330M
The AMD Athlon X4 860K and Intel Core i5-4330M are two processors from different eras and market segments, yet they land in a similar performance bracket. The data shows a consistent, if narrow, victory for the AMD desktop part across every shared benchmark. The Athlon X4 860K wins all five head-to-head tests, with margins ranging from 6.8% to 7.3%. This is a clear pattern: the AMD chip holds a small but uniform advantage in both single-threaded and multi-threaded workloads, despite the Intel part being a newer mobile design with a more modern architecture.
Head-to-Head Benchmarks
The most decisive win for the AMD Athlon X4 860K comes in the Cinebench R15 multicore test, where it scores 294 against the Intel Core i5-4330M’s 274. That is a 7.3% lead, the largest delta in the entire comparison. This result sets the tone for the multi-threaded tests, where the AMD’s four physical cores give it an edge over the Intel’s two cores with Hyper-Threading. In Cinebench R20 multicore, the Athlon X4 860K posts 1225 points versus 1145 for the i5-4330M, a 7% advantage. The Cinebench R23 multicore test repeats the pattern, with the AMD scoring 2918 and the Intel trailing at 2727, again a 7% difference.
Single-core performance tells a similar story, though the margins are slightly tighter. The Athlon X4 860K’s boost clock of 4.00 GHz appears to help it edge out the i5-4330M, which boosts to 3.80 GHz. In Cinebench R20 single-core, the AMD scores 172 against the Intel’s 161, a 6.8% lead. The Cinebench R23 single-core test shows the same 6.8% delta, with scores of 411 and 385 respectively. This is notable because Intel’s Haswell architecture is generally regarded as having stronger per-core efficiency than AMD’s Steamroller, yet the raw clock speed advantage of the Athlon X4 860K is enough to overcome that architectural gap.
The overall average benchmark score confirms the close nature of this matchup. The AMD Athlon X4 860K averages 943 points across all tests, while the Intel Core i5-4330M averages 938 points. The nearest rival data places both chips in the same performance tier. The Athlon X4 860K sits between the Intel Core i3-8145U (941 points, 0.2% behind) and the AMD A8-7670K (944 points, 0.1% ahead). The i5-4330M is similarly positioned, with the Intel Core i3-8145U 0.4% ahead and the AMD A8-7670K 0.7% ahead. In practical terms, these two CPUs are effectively peers, with the AMD part holding a slim but consistent edge in every measured workload.
FAQ
Q: Which processor is faster in multi-core workloads?
A: The AMD Athlon X4 860K wins all three multi-core benchmarks. It scores 294 vs 274 in Cinebench R15, 1225 vs 1145 in Cinebench R20, and 2918 vs 2727 in Cinebench R23. The margin is consistently 7% or 7.3%.
Q: Does the Intel Core i5-4330M win any benchmark?
A: No. The head-to-head data shows the AMD Athlon X4 860K winning all five tests, covering both single-core and multi-core workloads. The Intel part’s best result is a 6.8% deficit in single-core tests.
Q: How do these processors compare to their nearest rivals?
A: Both sit in the 25th percentile of all CPUs. The Athlon X4 860K has an average score of 943, placing it 0.1% behind the Intel Core i7-2715QE and 0.2% behind the Intel Core i3-8145U. The i5-4330M averages 938, putting it 0.4% behind the i3-8145U and i7-2715QE, and 0.5% behind the Athlon X4 860K.
Q: What is the core and thread configuration of each chip?
A: The AMD Athlon X4 860K has 4 cores and 4 threads. The Intel Core i5-4330M has 2 cores and 4 threads, using Hyper-Threading to reach the same thread count.
Q: Which processor has a higher boost clock?
A: The AMD Athlon X4 860K boosts to 4.00 GHz, while the Intel Core i5-4330M boosts to 3.80 GHz. The AMD part also has a higher base clock at 3.70 GHz versus 2.80 GHz.
Q: Do these processors belong to the same market segment?
A: No. The AMD Athlon X4 860K is a desktop processor, while the Intel Core i5-4330M is a mobile processor. This is reflected in their thermal design power: 95W for the AMD and 37W for the Intel.
Architecture Differences
The two processors come from fundamentally different design philosophies. The AMD Athlon X4 860K uses the Steamroller architecture, built on a 28 nm process at GlobalFoundries. It is a desktop part with a die size of 245 mm² and 2,411 million transistors. The Intel Core i5-4330M uses the Haswell architecture, manufactured on Intel’s 22 nm process, with a much smaller die at 118 mm² and 1,400 million transistors. This difference in process node and die size explains part of the power envelope gap, though the benchmark data shows that the larger, older AMD chip still manages to outperform the newer Intel part.
Cache hierarchies also differ significantly. The AMD Athlon X4 860K has 256 KB of L1 cache and 4 MB of L2 cache, with no L3 cache at all. The Intel Core i5-4330M has 64 KB of L1 cache per core, 256 KB of L2 cache per core, and 3 MB of shared L3 cache. Intel’s inclusion of a shared L3 cache is a notable architectural advantage for workloads that benefit from larger cached working sets, yet the benchmark results show the AMD chip overcoming this with its higher clock speeds and additional physical cores.
Memory support is another point of divergence. Both support DDR3 memory and dual-channel configurations, but the AMD Athlon X4 860K lists a memory bandwidth of 34.1 GB/s, while the Intel part does not specify a bandwidth figure. The AMD chip also supports PCIe Gen 3 with 16 CPU lanes, while the Intel mobile part has no PCIe specification listed. Neither processor supports ECC memory. The AMD Athlon X4 860K has no integrated graphics, while the Intel Core i5-4330M includes Intel HD 5000 graphics, which is typical for a mobile part.
The AMD Athlon X4 860K has an unlocked multiplier, making it a candidate for overclocking, whereas the Intel Core i5-4330M is locked. The AMD part is also marked as end-of-life, while the Intel part has no production status listed. The release dates are close, with the AMD launching on 2014-08-11 and the Intel on 2013-08-31, but the AMD is a desktop chip with a 95W TDP and the Intel is a mobile chip with a 37W TDP. These architectural and physical differences are substantial, yet they result in remarkably similar benchmark scores.
The Verdict
The data points to a clear, though narrow, winner: the AMD Athlon X4 860K. It outperforms the Intel Core i5-4330M in every single benchmark measured, with margins between 6.8% and 7.3%. For users prioritizing raw compute performance in Cinebench workloads, the AMD chip is the better choice. Its four physical cores and higher clock speeds (3.70 GHz base, 4.00 GHz boost) give it a consistent edge over the Intel’s two cores and four threads running at lower clocks (2.80 GHz base, 3.80 GHz boost).
However, the Intel Core i5-4330M is not without its merits. It is a mobile processor with a 37W TDP, which is less than half the 95W TDP of the AMD part. It includes integrated Intel HD 5000 graphics, which the AMD chip lacks entirely. It also has a more modern 22 nm process and a smaller die, which may indicate better efficiency for its intended laptop use case. The Intel part also features a shared 3 MB L3 cache, which the AMD chip does not have.
For a desktop user who already has a discrete graphics card and cares about multi-threaded performance, the AMD Athlon X4 860K is the data-backed choice. For a mobile user who needs integrated graphics and low power consumption, the Intel Core i5-4330M is the only viable option, despite its slight performance deficit. The average benchmark scores (943 vs 938) and percentile rankings (both 25th) show that these are closely matched processors, but the AMD chip takes the performance crown in every test where they can be directly compared.
Specification Differences
The AMD Athlon X4 860K and Intel Core i5-4330M differ in nearly every physical and technical specification. The AMD part has 4 cores and 4 threads, while the Intel part has 2 cores and 4 threads. Base clocks are 3.70 GHz for the AMD and 2.80 GHz for the Intel; boost clocks are 4.00 GHz and 3.80 GHz respectively. Thermal design power is 95W for the AMD and 37W for the Intel. The AMD uses Socket FM2+, while the Intel uses Socket G3. The AMD is built on a 28 nm node at GlobalFoundries with 2,411 million transistors on a 245 mm² die; the Intel uses a 22 nm node at Intel with 1,400 million transistors on a 118 mm² die.
Cache configurations are completely different: the AMD has 256 KB L1 and 4 MB L2 with no L3, while the Intel has 64 KB L1 per core, 256 KB L2 per core, and 3 MB shared L3. Memory support is DDR3 for both, but the AMD specifies dual-channel with 34.1 GB/s bandwidth, while the Intel does not list a memory bus or bandwidth. The AMD supports PCIe Gen 3 with 16 CPU lanes; the Intel has no PCIe specification. The AMD has no integrated graphics, while the Intel includes Intel HD 5000. The AMD is a desktop part with an unlocked multiplier and end-of-life status; the Intel is a mobile part with a locked multiplier and no production status. The AMD launched on 2014-08-11, the Intel on 2013-08-31.