AMD Athlon X4 845 vs Intel Pentium Gold G6500 Comparison
AMD Athlon X4 845
Pentium Gold G6500
PERFORMANCE BENCHMARKS
Analysis: AMD Athlon X4 845 vs Intel Pentium Gold G6500
The AMD Athlon X4 845 and Intel Pentium Gold G6500 are closely matched processors, with benchmark results showing the AMD part winning every single head-to-head test, albeit by very narrow margins. The data indicates that while the Athlon X4 845 edges out the Pentium Gold G6500 across all measured Cinebench workloads, the differences are so small they are effectively within run-to-run variance, making the choice between them a matter of platform preferences rather than raw performance dominance.
Head-to-Head Benchmarks
The benchmark data is remarkably one-sided in terms of win counts, with the AMD Athlon X4 845 taking all five head-to-head tests against the Intel Pentium Gold G6500. However, the margins are consistently razor-thin. In Cinebench R15 multi-core, the Athlon scores 324 against the Pentium's 322, a delta of just 0.6%. That is the largest margin of victory in any test. The pattern holds across the newer Cinebench versions: in Cinebench R20 multi-core, the Athlon posts 1350 versus 1343, a 0.5% lead; in single-core R20 it is 190 versus 189, again a 0.5% delta. The R23 results follow suit with the Athlon at 3215 against 3199 in multi-core (0.5%) and 453 against 451 in single-core (0.4%). The data shows a consistent, if tiny, advantage for the AMD chip in every scenario tested.
Considering the overall average benchmark score, the Athlon X4 845 sits at 1106, while the Pentium Gold G6500 is at 1101. This 0.5% aggregate difference places both processors at the 31st percentile of all CPUs, meaning they perform on par with a large swath of older mid-range desktop parts. The nearest rivals listed for the Athlon include the AMD Opteron 3280 at an identical 1106 average score and the AMD PRO A12-8870 at 1107, showing the Athlon's performance is typical for its generation. The Pentium's nearest rivals include the Intel Pentium Gold G6605 at 1103 and the Intel Core i5-3450S at 1099, confirming the G6500 is similarly positioned in the performance hierarchy. In direct comparison, the numbers show the Athlon's 5-0 sweep, but the single-digit point differences make it clear that no workload will feel materially different between these two chips.
Architecture Differences
The fundamental architectural split between these two CPUs is stark. The AMD Athlon X4 845 is built on a 28 nm process by GlobalFoundries, utilizing the Excavator architecture (Carrizo codename), while the Intel Pentium Gold G6500 uses a 14 nm process from Intel with the Comet Lake architecture. This process generation gap is significant, but the core configurations tell the more important story. The Athlon packs four physical cores with four threads, while the Pentium has only two physical cores but uses Hyper-Threading to reach four threads. This means the AMD processor offers true quad-core execution, whereas the Intel relies on simultaneous multithreading to match the thread count.
Cache configurations differ substantially. The Athlon X4 845 has 320 KB of L1 cache and 2 MB of L2 cache, with no L3 cache present. In contrast, the Pentium Gold G6500 provides 64 KB of L1 per core, 256 KB of L2 per core, and a shared 4 MB L3 cache. The Intel chip's L3 cache is a notable advantage for frequently accessed data, while the AMD chip's larger aggregate L1 (320 KB versus 128 KB on the Pentium) helps with certain workloads. The transistor counts and die sizes are only listed for the AMD part (3,100 million transistors on a 250 mm² die), with no comparable data provided for the Intel chip.
Clock speeds and power draw are also divergent. The Athlon X4 845 has a base clock of 3.50 GHz and a boost clock of 3.80 GHz, with a 65 W TDP. The Pentium Gold G6500 has a higher base clock of 4.10 GHz with no boost clock listed, yet manages a lower 58 W TDP. The Intel chip achieves its higher clock speed at lower power consumption, a clear efficiency advantage. Memory support differs as well: the Athlon uses DDR3 with 34.1 GB/s bandwidth, while the Pentium uses DDR4 with 42.7 GB/s. Both run dual-channel memory, but the Intel platform's newer memory standard provides higher theoretical bandwidth. The PCIe configurations also differ, with the Athlon offering 8 CPU lanes of PCIe Gen 3 versus the Pentium's 16 lanes of Gen 3, giving the Intel chip more headroom for expansion. The Athlon has an unlocked multiplier, while the Pentium is locked. Notably, the Intel chip includes integrated UHD Graphics 630, whereas the Athlon has no integrated graphics listed, requiring a discrete GPU in all configurations.
Where Each One Wins
Based strictly on the benchmark data, the AMD Athlon X4 845 wins every measured workload. The multi-core tests (Cinebench R15, R20, and R23) all favor the Athlon, with the R15 result showing the largest margin at 0.6% ahead. This suggests that applications which scale across four physical cores see a slight benefit from the AMD's design, even if the per-core efficiency is lower. The Athlon's four physical cores likely contribute to its edge in multi-threaded rendering tasks, as evidenced by its consistent lead in all three multi-core Cinebench runs.
The single-core tests are nearly dead even, with the Athlon winning by just 0.5% in R20 and 0.4% in R23. This is notable because the Intel Pentium has a substantially higher base clock of 4.10 GHz compared to the Athlon's 3.80 GHz boost. The data suggests that despite the clock speed disadvantage, the AMD Excavator architecture holds its own in single-threaded performance against the Comet Lake design. For workloads that are lightly threaded, the difference between 453 and 451 points in R23 single-core is imperceptible in practice.
The Intel Pentium Gold G6500's advantages are found outside the Cinebench results. Its lower 58 W TDP versus the Athlon's 65 W, combined with its higher base clock, indicates better power efficiency per clock. The integrated UHD Graphics 630 provides a built-in display output solution that the Athlon completely lacks, which is a decisive factor for systems without a discrete graphics card. The 16 PCIe Gen 3 lanes on the Intel platform double the AMD's 8 lanes, offering more bandwidth for GPUs or NVMe storage. The 4 MB shared L3 cache and DDR4 support with 42.7 GB/s bandwidth further tilt the platform-level features toward Intel.
The Verdict
The benchmark results are unambiguous: the AMD Athlon X4 845 wins all five head-to-head tests against the Intel Pentium Gold G6500. However, the margins are so narrow—never exceeding 0.6%—that no real-world application will show a meaningful difference between the two. The data shows both processors scoring within 0.5% of each other in average benchmark score (1106 versus 1101), and both sit at the 31st percentile of all CPUs, indicating they occupy the same performance tier.
The choice between these two comes down to platform requirements rather than performance. Users building a new system in 2020 or later would favor the Pentium Gold G6500 for its active production status, DDR4 memory support, integrated graphics, lower TDP, and double the PCIe lanes. The Athlon X4 845, released in early 2016 and now end-of-life, requires a legacy FM2+ motherboard with DDR3 memory, which limits its upgrade path and modern feature set. For those with an existing FM2+ platform seeking a small performance boost, the Athlon's consistent, if marginal, benchmark wins make it a valid choice. For anyone starting fresh, the Intel chip's platform advantages—including the absence of a discrete GPU requirement—make it the more practical option, despite losing every benchmark test.
FAQ
Q: Which processor has a higher single-core score in Cinebench R23?
A: The AMD Athlon X4 845 scores 453 in Cinebench R23 single-core, compared to the Intel Pentium Gold G6500's 451, giving the AMD chip a 0.4% lead.
Q: What is the difference in multi-core performance in Cinebench R20?
A: The Athlon X4 845 scores 1350 while the Pentium Gold G6500 scores 1343, a difference of 0.5% in favor of the AMD processor.
Q: Do both processors support the same memory type?
A: No. The AMD Athlon X4 845 supports DDR3 memory with 34.1 GB/s bandwidth, while the Intel Pentium Gold G6500 supports DDR4 with 42.7 GB/s bandwidth. Both use dual-channel memory configurations.
Q: Does the Intel Pentium Gold G6500 include integrated graphics?
A: Yes, the Intel Pentium Gold G6500 includes UHD Graphics 630. The AMD Athlon X4 845 has no integrated graphics listed in its specifications.
Q: How do the two processors compare in terms of physical cores and threads?
A: The AMD Athlon X4 845 has 4 physical cores and 4 threads, while the Intel Pentium Gold G6500 has 2 physical cores and 4 threads, meaning the Intel chip uses Hyper-Threading to reach its thread count.
Q: What is the average benchmark score for each processor?
A: The AMD Athlon X4 845 has an average benchmark score of 1106, and the Intel Pentium Gold G6500 has an average benchmark score of 1101. Both processors rank at the 31st percentile of all CPUs.
Specification Differences
| Specification | AMD Athlon X4 845 | Intel Pentium Gold G6500 |
|---|---|---|
| Cores | 4 | 2 |
| Threads | 4 | 4 |
| Base Clock | 3.50 GHz | 4.10 GHz |
| Boost Clock | 3.80 GHz | None |
| TDP | 65 W | 58 W |
| Socket | AMD Socket FM2+ | Intel Socket 1200 |
| Architecture | Excavator | Comet Lake |
| Process Node | 28 nm | 14 nm |
| Foundry | GlobalFoundries | Intel |
| L1 Cache | 320 KB | 64 KB (per core) |
| L2 Cache | 2 MB | 256 KB (per core) |
| L3 Cache | None | 4 MB (shared) |
| Memory Support | DDR3 | DDR4 |
| Memory Bandwidth | 34.1 GB/s | 42.7 GB/s |
| PCIe | Gen 3, 8 Lanes (CPU only) | Gen 3, 16 Lanes (CPU only) |
| Integrated Graphics | None | UHD Graphics 630 |
| Production Status | End-of-life | Active |
| Multiplier Unlocked | Yes | No |
| Transistors | 3,100 million | Not listed |
| Die Size | 250 mm² | Not listed |