AMD Athlon Silver PRO 3125GE vs Intel Core i7-2600S Comparison
AMD Athlon Silver PRO 3125GE
Core i7-2600S
PERFORMANCE BENCHMARKS
Analysis: AMD Athlon Silver PRO 3125GE vs Intel Core i7-2600S
Head-to-Head Benchmarks
The benchmark data presents an unusually tight contest between the Intel Core i7-2600S and the AMD Athlon Silver PRO 3125GE. Across all six head-to-head Cinebench runs, the largest margin of victory is a mere 0.1%, making this one of the closest comparisons in the database. The Intel part claims four wins, while the AMD chip takes two, but the scores tell a story of near-parity rather than dominance.
In Cinebench R15, both processors deliver identical results. The multi-core test shows a score of 396 for each, a dead heat. The single-core test is equally matched at 55 points apiece. These are the only two benchmarks where the delta is exactly zero, yet they set the tone for the entire comparison. Moving to Cinebench R20, the AMD Athlon Silver PRO 3125GE edges ahead in multi-core with a score of 1653 against Intel's 1651, a delta of -0.1% favoring AMD. The single-core R20 test returns to parity, with both chips scoring 233. In Cinebench R23, the pattern repeats: AMD achieves 3938 multi-core points versus Intel's 3933, again a -0.1% delta, while the single-core test ties at 555 for both.
The overall average benchmark scores reinforce this picture. The Intel Core i7-2600S averages 1146 points across all tested workloads, while the AMD Athlon Silver PRO 3125GE averages 1138. That 8-point gap is well within the noise of any individual test. Both processors sit at the 32nd percentile among all CPUs in the database, placing them in the same performance tier. When comparing to nearest rivals, the Intel chip's closest competitor is the AMD Opteron 4284 at an identical 1146 average score, followed by the Intel Core i7-3612QE at 1147 (-0.1%) and the AMD Opteron 4332 HE at 1144 (+0.2%). The AMD Athlon Silver PRO 3125GE's nearest rival is the Intel Xeon E5640 at 1137 (+0.1%), with the Intel Core i5-2550K and i5-3570T both at 1136 (+0.2%), and the Intel Core i3-N300 at 1135 (+0.3%).
What is striking is that the AMD chip achieves this parity with half the cores and half the threads. The Intel i7-2600S packs 4 cores and 8 threads, while the Athlon Silver PRO 3125GE manages only 2 cores and 4 threads. Yet in multi-core workloads, the AMD part either ties or leads by a hair. This suggests that per-core efficiency differences are substantial, though the data does not break down per-core performance directly. In single-core tests, the two are perfectly matched across R15, R20, and R23, with identical scores of 55, 233, and 555 respectively.
The Verdict
The data paints a picture of functional equivalence for most users. The Intel Core i7-2600S wins 4 of 6 head-to-head benchmarks, but every one of those wins is a tie at 0% delta. The AMD Athlon Silver PRO 3125GE's two wins are both by -0.1%, a margin that is statistically negligible. If you are choosing based purely on Cinebench scores, the decision is effectively a coin flip with a slight edge to Intel in name only.
However, the specification gap tells a different story. The AMD chip does more with less. It matches the Intel processor's multi-core throughput while using only half the cores. This is reflected in the thermal and power envelope: the AMD Athlon Silver PRO 3125GE has a TDP of 35 watts against Intel's 65 watts. For systems where heat dissipation and power draw are constraints, the AMD part is the clear choice from a design perspective, though the benchmark data itself shows no performance penalty for the Intel chip's higher TDP.
The Intel Core i7-2600S is an end-of-life product released in 2011, while the AMD Athlon Silver PRO 3125GE is an active product from 2020. That nine-year gap in release dates matters for platform longevity and feature support. The AMD chip supports DDR4 memory with a measured bandwidth of 42.7 GB/s, whereas the Intel part is limited to DDR3. The AMD processor also supports ECC memory, which the Intel part does not. For professional or server-adjacent workloads where data integrity is paramount, ECC support is a decisive factor.
For users who need multi-threaded performance and already have an LGA 1155 platform, the Intel i7-2600S delivers that performance with 8 threads. For new builds, the AMD Athlon Silver PRO 3125GE offers the same benchmark performance with modern memory support, lower TDP, and ECC capability. The data neither endorses nor condemns either chip definitively; it simply shows that raw compute performance is indistinguishable between them.
FAQ
Q: Which processor has a higher average benchmark score?
A: The Intel Core i7-2600S has an average benchmark score of 1146, while the AMD Athlon Silver PRO 3125GE scores 1138. The difference is 8 points, or roughly 0.7% in Intel's favor.
Q: How do the two chips compare in Cinebench R23 multi-core?
A: The AMD Athlon Silver PRO 3125GE scores 3938, and the Intel Core i7-2600S scores 3933. AMD leads by 5 points, a delta of -0.1% when calculated from Intel's perspective.
Q: Are there any benchmarks where the two processors tie exactly?
A: Yes. In Cinebench R15 multi-core (396 each), R15 single-core (55 each), R20 single-core (233 each), and R23 single-core (555 each), both processors produce identical scores.
Q: What is the TDP difference between the two?
A: The Intel Core i7-2600S has a TDP of 65 watts, while the AMD Athlon Silver PRO 3125GE has a TDP of 35 watts. The AMD part consumes 30 fewer watts.
Q: Which processor supports ECC memory?
A: Only the AMD Athlon Silver PRO 3125GE supports ECC memory. The Intel Core i7-2600S does not.
Q: What are the core counts and process nodes?
A: The Intel Core i7-2600S has 4 cores and 8 threads on a 32 nm node. The AMD Athlon Silver PRO 3125GE has 2 cores and 4 threads on a 12 nm node. The AMD chip uses a smaller process node.
Specification Differences
The two processors differ across nearly every major specification. The Intel Core i7-2600S uses 4 cores with 8 threads, while the AMD Athlon Silver PRO 3125GE uses 2 cores with 4 threads. Base clocks are 2.80 GHz for Intel and 3.40 GHz for AMD; the Intel part has a boost clock of 3.80 GHz, while the AMD part has no listed boost clock. TDP is 65 watts for Intel and 35 watts for AMD. The Intel chip fits the Intel Socket 1155, while the AMD chip uses the AMD Socket AM4.
Cache hierarchies diverge significantly. The Intel Core i7-2600S has 64 KB L1 per core, 256 KB L2 per core, and 8 MB shared L3. The AMD Athlon Silver PRO 3125GE has 96 KB L1 per core, 512 KB L2 per core, and 4 MB shared L3. Memory support differs: Intel uses DDR3 with dual-channel bus, while AMD uses DDR4 with dual-channel bus and a measured bandwidth of 42.7 GB/s. ECC memory is supported only on the AMD chip. PCIe lanes are 16 for Intel and 8 for AMD, both Gen 3. Integrated graphics are the Intel HD 2000 versus the Radeon Vega 3. Transistor counts are 1,160 million for Intel and 4,940 million for AMD. Die sizes are 216 mm² for Intel and 210 mm² for AMD. Production statuses are end-of-life for Intel and active for AMD. The release dates are 2011 for Intel and 2020 for AMD.
Architecture Differences
The architectural gap between these two parts is substantial. The Intel Core i7-2600S is built on the Sandy Bridge architecture, a 32 nm design from Intel with a die size of 216 mm². The AMD Athlon Silver PRO 3125GE uses the Zen+ architecture, specifically the Picasso codename, on a 12 nm process from GlobalFoundries with a die size of 210 mm². Despite similar die sizes, the transistor counts are wildly different: AMD packs 4,940 million transistors versus Intel's 1,160 million. This reflects the fundamental design philosophy shift between a 2011 Intel architecture and a 2020 AMD architecture.
The cache designs reflect different strategies. Intel allocates 64 KB L1 and 256 KB L2 per core, with a shared 8 MB L3. AMD provides 96 KB L1 and 512 KB L2 per core, with a shared 4 MB L3. The AMD chip has more per-core cache but half the total L3. The Intel part supports 16 PCIe Gen 3 lanes, double the AMD chip's 8 lanes. Both have integrated graphics, but the Intel HD 2000 is a much older GPU compared to the Radeon Vega 3.
The memory architecture is a major differentiator. The Intel Core i7-2600S is limited to DDR3, while the AMD Athlon Silver PRO 3125GE supports DDR4 with a bandwidth of 42.7 GB/s. ECC support on the AMD part is notable, as it allows for error-correcting memory in compatible systems. The Intel part has no such capability. The AMD chip also has a lower TDP of 35 watts, which is a direct consequence of the smaller 12 nm process and lower core count. The Intel part's 65-watt TDP is higher but still within the range of a typical desktop processor.
The generations are clearly demarcated: Core i7 (Sandy Bridge) for Intel, and Athlon (Zen (Dali)) for AMD. The Intel part is a quad-core with Hyper-Threading, while the AMD part is a dual-core with simultaneous multithreading. Neither part has an unlocked multiplier. The production statuses reflect their lifecycles: the Intel chip is end-of-life, while the AMD chip remains active. The part numbers are SR00E for Intel and YD3125C6M2OFH for AMD.