AMD Athlon Silver PRO 3125GE vs Intel Core i3-N300 Comparison
AMD Athlon Silver PRO 3125GE
Core i3-N300
PERFORMANCE BENCHMARKS
Analysis: AMD Athlon Silver PRO 3125GE vs Intel Core i3-N300
The Verdict
The benchmark data presents a genuinely split decision between the AMD Athlon Silver PRO 3125GE and the Intel Core i3-N300, with each processor taking two decisive victories in the six head-to-head Cinebench runs. The Intel part wins four of the six tests, including dominant margins in both R20 multicore (2849 vs 1653, a 42% advantage) and R20 single-core (401 vs 233, a 41.9% edge). However, the AMD chip strikes back hard in the R23 suite, where it leads by 54.7% in multicore (3938 vs 2546) and by 8.2% in single-core (555 vs 513). The overall average benchmark scores are nearly identical — 1138 for AMD versus 1135 for Intel — and both sit at the 32nd percentile of all CPUs, meaning they occupy the exact same performance tier despite their wildly different architectures.
For users whose workloads resemble Cinebench R20 — which tends to favor sustained multi-threaded throughput and higher single-thread clocks — the Intel Core i3-N300 is the clear choice. Its eight Gracemont cores and 3.70 GHz boost clock deliver decisive wins in both R20 tests and in the R15 multicore test (416 vs 396). Conversely, for workloads that behave more like Cinebench R23 — which often rewards different memory access patterns and cache behavior — the AMD Athlon Silver PRO 3125GE’s Zen+ architecture with its 4 MB shared L3 and dual-channel DDR4 memory bus proves superior, especially in multicore where it nearly doubles the Intel part’s score. The R15 single-core test (85 vs 55, a 35.3% Intel win) and R23 single-core (555 vs 513, an 8.2% AMD win) further illustrate that these processors trade blows depending on the rendering engine version.
The practical verdict: choose the Intel Core i3-N300 if your primary applications align with R20-style scaling and you need the higher single-core score in older Cinebench versions; choose the AMD Athlon Silver PRO 3125GE if your workloads resemble R23’s characteristics, where its multicore lead is overwhelming. System builders should also note that the AMD part is a desktop AM4 socket part with ECC memory support, while the Intel part is a mobile BGA 1264 part without ECC — a distinction that may matter for embedded or reliability-focused deployments.
Architecture Differences
The two processors could hardly be more different internally. The AMD Athlon Silver PRO 3125GE is built on the Zen+ architecture (codename Picasso, part of the Athlon Zen Dali generation) using a 12 nm process from GlobalFoundries. It packs 2 cores and 4 threads with a fixed 3.40 GHz base clock and no boost clock. The Intel Core i3-N300, by contrast, uses the Gracemont architecture (also its codename) on Intel’s 10 nm process, featuring 8 cores and 8 threads — no simultaneous multithreading — with a 100 MHz base clock and a 3.70 GHz boost clock. That base clock figure is notable: the Intel part’s nominal base is extremely low, relying entirely on boost behavior to reach its performance envelope.
Cache configurations diverge significantly. Both parts share 96 KB of L1 per core, but the AMD chip has 512 KB of L2 per core and 4 MB of shared L3, while the Intel chip offers 2 MB of L2 per module and 6 MB of shared L3. The AMD part’s L3 advantage is smaller in total capacity, but its per-core allocation is larger given only two cores. The Intel part’s L2 is organized per module, which reflects its hybrid core topology. The AMD processor uses dual-channel DDR4 memory with 42.7 GB/s of bandwidth and supports ECC; the Intel processor supports both DDR4 and DDR5 but only in single-channel configuration, delivering 38.4 GB/s and no ECC. That memory bandwidth gap of 4.3 GB/s (42.7 vs 38.4) is modest but consistent with the AMD part’s advantage in R23 multicore.
PCIe connectivity also differs: the AMD part provides Gen 3 with 8 lanes (CPU only), while the Intel part provides Gen 3 with 9 lanes (CPU only). Integrated graphics differ as well — AMD uses Radeon Vega 3, Intel uses UHD Graphics 770. The AMD part is a 35 W TDP desktop chip on Socket AM4, while the Intel part is a 7 W TDP mobile chip on BGA 1264. Release dates are about two and a half years apart: July 2020 for AMD, January 2023 for Intel. The Intel part has a launch MSRP of $309; the AMD part has no listed launch MSRP. Neither processor has an unlocked multiplier.
Where Each One Wins
The Intel Core i3-N300 wins decisively in Cinebench R15 and R20 across both single-core and multicore tests. Its R15 single-core score of 85 versus AMD’s 55 represents a 35.3% lead, the largest single-test margin for Intel. In R20, the Intel part scores 401 single-core and 2849 multicore, versus AMD’s 233 and 1653 — leads of 41.9% and 42%, respectively. These results suggest that for workloads resembling R15 and R20, the Intel part’s eight Gracemont cores and 3.70 GHz boost clock provide substantial advantages, particularly in single-threaded tasks where its boost clock far exceeds AMD’s fixed 3.40 GHz.
The AMD Athlon Silver PRO 3125GE wins in both R23 tests, and its multicore victory is the single largest margin in the entire head-to-head set. The AMD part scores 3938 in R23 multicore versus Intel’s 2546, a 54.7% advantage, and 555 in R23 single-core versus 513, an 8.2% lead. The R23 multicore result is especially striking given that the AMD chip has only 2 cores and 4 threads versus Intel’s 8 cores and 8 threads. This implies that R23’s rendering workload is highly sensitive to memory bandwidth and cache efficiency, where the AMD part’s dual-channel DDR4 (42.7 GB/s) and per-core L2/L3 allocation prove more effective than Intel’s single-channel memory (38.4 GB/s) and shared L3.
For specific use cases: the Intel part is better suited for older Cinebench versions, tasks that scale with thread count in R15/R20-style engines, and scenarios where single-core boost clocks matter more than memory bandwidth. The AMD part is preferable for R23-style rendering, multi-threaded workloads that benefit from dual-channel memory, and any deployment requiring ECC memory support (which the Intel part lacks). The AMD part’s desktop socket and 35 W TDP also make it more appropriate for always-on systems, while the Intel part’s 7 W TDP and mobile socket target low-power embedded or laptop designs.
FAQ
Q: Which processor has the higher average benchmark score?
A: The AMD Athlon Silver PRO 3125GE has an average benchmark score of 1138, while the Intel Core i3-N300 scores 1135. The difference is 0.3%, and both sit at the 32nd percentile of all CPUs.
Q: How large is the Intel part’s lead in Cinebench R20 multicore?
A: The Intel Core i3-N300 scores 2849 in R20 multicore versus AMD’s 1653, a 42% advantage. This is the second-largest margin in the head-to-head data.
Q: What explains the AMD part’s massive R23 multicore win?
A: The AMD Athlon Silver PRO 3125GE scores 3938 in R23 multicore versus Intel’s 2546, a 54.7% lead. The data suggests the AMD part’s dual-channel DDR4 memory (42.7 GB/s) and 4 MB shared L3 provide a significant advantage in the R23 rendering engine despite having only 2 cores versus Intel’s 8.
Q: Does the Intel Core i3-N300 support ECC memory?
A: No. The Intel part lists ECC memory support as false. The AMD Athlon Silver PRO 3125GE lists ECC memory support as true.
Q: What are the memory bandwidth figures for each processor?
A: The AMD part provides 42.7 GB/s via dual-channel DDR4. The Intel part provides 38.4 GB/s via single-channel DDR4 or DDR5. The AMD part’s bandwidth is 4.3 GB/s higher.
Q: Which processor has the higher boost clock?
A: The Intel Core i3-N300 has a boost clock of 3.70 GHz. The AMD Athlon Silver PRO 3125GE has no boost clock, operating at a fixed base clock of 3.40 GHz.
Head-to-Head Benchmarks
The six Cinebench tests reveal a clear pattern: the Intel Core i3-N300 dominates the older R15 and R20 versions, while the AMD Athlon Silver PRO 3125GE wins the newer R23 suite. In Cinebench R15 multicore, the Intel part scores 416 against AMD’s 396, a 4.8% lead. The R15 single-core test shows a much larger gap: Intel scores 85 against AMD’s 55, a 35.3% margin. That R15 single-core result is the third-largest delta in the dataset and underscores how Intel’s 3.70 GHz boost clock outperforms AMD’s fixed 3.40 GHz in lightly threaded legacy workloads.
Moving to R20, the Intel advantage grows substantially. In R20 multicore, Intel scores 2849 versus AMD’s 1653 — a 42% lead that reflects the eight-core Gracemont design’s ability to scale with multi-threaded rendering. The R20 single-core test shows a similar 41.9% gap (401 vs 233), indicating that Intel’s single-core advantage persists even in this newer rendering engine. At this point in the benchmark sequence, Intel has won all four tests, with margins ranging from 4.8% to 42%.
The R23 suite flips the script dramatically. In R23 multicore, the AMD Athlon Silver PRO 3125GE scores 3938 versus Intel’s 2546, a 54.7% lead that stands as the largest margin in the entire head-to-head set. This result is counterintuitive given the Intel part’s 8 cores versus AMD’s 2, but the data clearly shows that R23’s workload favors the AMD chip’s dual-channel memory subsystem and cache layout. The R23 single-core test also goes to AMD, with a score of 555 versus 513, an 8.2% lead. This single-core win is notable because it contradicts the R15 and R20 single-core results, suggesting that R23’s engine has different memory latency and bandwidth sensitivities that favor the AMD design.
The final tally shows Intel winning 4 tests and AMD winning 2. However, the magnitude of AMD’s R23 multicore win (54.7%) exceeds the magnitude of any single Intel win (the 42% R20 multicore and 41.9% R20 single-core are close but smaller). The average benchmark scores — 1138 for AMD, 1135 for Intel — reflect this balance, with the two parts separated by just 0.3% overall. The nearest rival data corroborates this: both processors are clustered with the Intel Core i5-3570T (1136), Intel Core i5-2550K (1136), and Intel Xeon E5640 (1137), all within 0.3% of each other. This places the two chips in a tightly contested performance tier where specific workload characteristics — not raw core counts or clock speeds — determine the winner.