AMD Athlon Silver 3050U vs AMD PRO A10-9700E Comparison

AMD
AMD

AMD Athlon Silver 3050U

CORE STATE Dali
CORE SPECS 2 Cores / 4 Threads
CLOCK SPEED 2.2 Base / 3.2 GHz Turbo
CACHE 4 MB (shared)
MAX TDP 15W
ARCHITECTURE Zen
nm
PROCESS 14 nm
LAUNCH DATE 2020
VS
AMD
AMD

PRO A10-9700E

CORE STATE Bristol Ridge
CORE SPECS 4 Cores / 4 Threads
CLOCK SPEED 3 Base / 3.5 GHz Turbo
CACHE —
MAX TDP 35W
ARCHITECTURE Excavator
nm
PROCESS 28 nm
LAUNCH DATE 2016

PERFORMANCE BENCHMARKS

cinebench_cinebench_r15_multicore
252
259
cinebench_cinebench_r20_multicore
1,052
1,081
cinebench_cinebench_r20_singlecore
148
152
cinebench_cinebench_r23_multicore
2,505
2,574
cinebench_cinebench_r23_singlecore
353
363
geekbench_multicore
1,309
1,430
geekbench_singlecore
803
577

Analysis: AMD Athlon Silver 3050U vs AMD PRO A10-9700E

The AMD PRO A10-9700E and the AMD Athlon Silver 3050U are two processors separated by architecture, era, and intended platform, yet their aggregate benchmark scores land them within 0.2% of each other. The data shows a near-total sweep for one chip in multi-threaded and sustained workloads, while the other counters with a decisive victory in a single, critical metric. With an average benchmark score of 919 for the A10-9700E versus 917 for the Athlon Silver 3050U, these parts are statistical twins in overall performance, but the nature of their respective wins tells a more nuanced story about their strengths.

Head-to-Head Benchmarks

The AMD PRO A10-9700E wins six of the seven head-to-head benchmark comparisons, and in most of those contests, the victory is narrow but consistent. In the Cinebench suite, the A10-9700E holds a steady advantage across every iteration. In Cinebench R15 multicore, it scores 259 against the Athlon’s 252, a 2.8% lead. That exact 2.8% delta repeats in Cinebench R20 multicore (1081 vs 1052), Cinebench R23 multicore (2574 vs 2505), and even in the single-core variants: Cinebench R20 single-core shows 152 vs 148, and Cinebench R23 single-core shows 363 vs 353. This uniformity across different rendering workloads suggests a consistent, if modest, execution advantage for the older Excavator-based part in threaded and lightly threaded Cinebench tasks alike.

The Geekbench multicore test offers the A10-9700E its largest margin of victory. Here, it posts 1430 points against the Athlon’s 1309, a 9.2% swing. This is the most significant multi-threaded gap between the two, indicating that in this particular synthetic workload, the A10-9700E’s four physical cores provide a more substantial benefit than the Athlon’s two-core/four-thread configuration.

However, the Athlon Silver 3050U claims the single most lopsided result in the entire comparison. In Geekbench single-core, it scores 803 versus the A10-9700E’s 577. This is a 28.1% deficit for the PRO A10-9700E — by far the largest delta in either direction. The Athlon’s Zen architecture delivers a crushing blow in this test, reversing the narrative seen in the Cinebench single-core results, where the A10-9700E held a 2.8% lead. The discrepancy between the two single-core tests is stark: the Athlon wins Geekbench single-core by a landslide, yet loses Cinebench single-core by a small margin.

Where Each One Wins

The AMD PRO A10-9700E is the clear winner in multi-threaded and mixed workloads. Its six benchmark victories span the entire Cinebench suite, both multicore and singlecore, as well as Geekbench multicore. The data suggests this part is better suited for tasks that can leverage four physical cores, such as video encoding, 3D rendering, or any productivity application that scales across cores. The 9.2% lead in Geekbench multicore is particularly telling, as it indicates a robust advantage in a test that simulates a variety of real-world computing scenarios, from cryptography to image processing. For a desktop part with a 35W TDP, the A10-9700E consistently delivers higher throughput in these aggregated workloads.

The AMD Athlon Silver 3050U wins in one specific, high-impact metric: Geekbench single-core. With a score of 803, it outperforms the A10-9700E by 226 points. This is a massive margin, and it points to the superior IPC (instructions per clock) of the Zen architecture. For applications that are heavily dependent on single-thread performance — such as web browsing, office productivity, light coding, or any software that is poorly optimized for multi-threading — the Athlon Silver 3050U is the stronger choice. Its 15W TDP also positions it as a more power-efficient option for mobile devices, where thermal and battery constraints are paramount. The trade-off is clear: the Athlon wins where responsiveness and per-core speed matter, while the A10-9700E wins where raw core count and sustained throughput are required.

Architecture Differences

The architectural gap between these two processors is fundamental. The AMD PRO A10-9700E is built on the Excavator architecture, codenamed Bristol Ridge, and fabricated on a 28nm process at GlobalFoundries. It features four cores and four threads, with a base clock of 3.00 GHz and a boost clock of 3.50 GHz. Its cache hierarchy includes 320 KB of L1 and 2 MB of L2, with no L3 cache present. The die size is 250 mm², and it packs 3,100 million transistors. It uses the AMD Socket AM4 platform and is classified as a desktop part with a 35W TDP.

The AMD Athlon Silver 3050U is a fundamentally newer design. It uses the Zen architecture, codenamed Dali, and is built on a 14nm process, also at GlobalFoundries. It has just two cores but supports four threads via SMT (simultaneous multithreading), with a base clock of 2.20 GHz and a boost clock of 3.20 GHz. Its cache is organized differently: 96 KB of L1 and 512 KB of L2 per core, plus a 4 MB shared L3 cache — a critical addition that the A10-9700E lacks entirely. The die is significantly smaller at 148 mm², yet it contains 3,500 million transistors, reflecting the denser 14nm process. It uses the AMD Socket FP5, is designed for mobile platforms, and has a much lower 15W TDP.

Both chips support DDR4 memory in dual-channel configuration with a memory bandwidth of 38.4 GB/s, and neither supports ECC memory. Both also offer PCIe Gen 3 with 8 lanes from the CPU. The integrated graphics differ: the A10-9700E features a Radeon R7, while the Athlon Silver 3050U features a Radeon Vega 3. The A10-9700E was released in October 2016, while the Athlon Silver 3050U arrived in January 2020, marking a generational leap in process technology and core design. The A10-9700E’s lack of L3 cache is a significant handicap in modern workloads, while the Athlon’s shared 4 MB L3 helps compensate for its lower core count.

The Verdict

The benchmark data paints a clear picture for distinct use cases. The AMD PRO A10-9700E is the better choice for users who prioritize multi-threaded performance and are willing to accept a larger power envelope. Its consistent 2.8% lead across all Cinebench tests and its 9.2% advantage in Geekbench multicore make it the superior part for rendering, compiling, or any workload that scales with physical cores. Its four cores are a tangible asset, and its 35W TDP, while higher, is appropriate for a desktop platform where cooling is less constrained. For a system built on Socket AM4, this part delivers dependable throughput in heavily threaded tasks.

The AMD Athlon Silver 3050U is the better pick for single-threaded performance and power efficiency. Its 28.1% lead in Geekbench single-core is a decisive factor for everyday computing, where most applications still rely on one or two threads. The Zen architecture’s superior IPC, combined with a 4 MB L3 cache, provides a snappier experience in web browsing, office applications, and light productivity. The 15W TDP makes it ideal for thin-and-light laptops where battery life is critical. However, its two physical cores limit its ceiling in multi-threaded tasks, as evidenced by its losses in every Cinebench multicore test and the substantial gap in Geekbench multicore.

There is no universal winner. The PRO A10-9700E wins 6 of 7 benchmarks, but the one it loses — Geekbench single-core — is often the most perceptible in daily use. The aggregate scores are nearly identical (919 vs 917), placing both in the 24th-25th percentile of all CPUs. The selection should be based on workload: choose the A10-9700E for multi-threaded grunt on a desktop, or the Athlon Silver 3050U for single-thread responsiveness and portability. The data does not support a blanket recommendation for either.

FAQ

Q: Which processor has a higher average benchmark score?

A: The AMD PRO A10-9700E has an average benchmark score of 919, while the AMD Athlon Silver 3050U scores 917, a difference of 0.2%.

Q: How much faster is the AMD PRO A10-9700E in Geekbench multicore?

A: The A10-9700E scores 1430 compared to the Athlon Silver 3050U’s 1309, giving it a 9.2% advantage.

Q: What is the largest performance gap between the two processors?

A: The largest gap is in Geekbench single-core, where the AMD Athlon Silver 3050U scores 803 versus the A10-9700E’s 577, a 28.1% lead for the Athlon.

Q: Do both processors support the same memory configuration?

A: Yes, both support DDR4 memory in dual-channel mode with a memory bandwidth of 38.4 GB/s, and neither supports ECC memory.

Q: Which processor has a larger L3 cache?

A: The AMD Athlon Silver 3050U has 4 MB of shared L3 cache, while the AMD PRO A10-9700E has no L3 cache at all.

Q: Which processor is better for multi-threaded rendering workloads?

A: The AMD PRO A10-9700E wins all Cinebench multicore tests, including Cinebench R23 multicore with a score of 2574 versus 2505 for the Athlon, a 2.8% lead.

DETAILED SPECIFICATIONS

SPECIFICATION
Athlon Silver 3050U
PRO A10-9700E
Core Specs
Cores
2
4 +100.0%
Threads
4
4 0.0%
Base Clock (GHz)
2.2
3 +36.4%
Boost Clock (GHz)
3.2
3.5 +9.4%
Frequency (GHz)
2.2
3 +36.4%
Turbo Clock (GHz)
3.2
3.5 +9.4%
Multiplier
22
30 +36.4%
SMP CPUs
1
1 0.0%
Cache
L1 Cache
96 KB (per core)
320 KB
L2 Cache
512 KB (per core)
2 MB
L3 Cache
4 MB (shared)
—
Power
TDP (W)
15
35 +133.3%
Configurable TDP
12-25 W
—
Architecture
Architecture
Zen
Excavator
Codename
Dali
Bristol Ridge
Generation
Athlon (Zen (Dali))
A10 (Bristol Ridge)
Process Size
14 nm
28 nm
Transistors
3,500 million
3,100 million
Die Size
148 mm²
250 mm²
Foundry
GlobalFoundries
GlobalFoundries
Memory
Memory Support
DDR4
DDR4
Memory Bus
Dual-channel
Dual-channel
Memory Bandwidth
38.4 GB/s
38.4 GB/s
ECC Memory
No
No
Platform
Socket
AMD Socket FP5
AMD Socket AM4
PCIe
Gen 3, 8 Lanes(CPU only)
Gen 3, 8 Lanes(CPU only)
Graphics
Integrated Graphics
Radeon Vega 3
Radeon R7
Other
Market
Mobile
Desktop
Production Status
Active
Active
Part Number
YM3050C4T2OFG
AD970BAHM44AB
Package
FP5
µOPGA-1331
Tj Max
95°C
90°C
View Athlon Silver 3050U Details View PRO A10-9700E Details