AMD A12-9800 vs Intel Pentium Gold G6505T Comparison
AMD A12-9800
Pentium Gold G6505T
PERFORMANCE BENCHMARKS
Analysis: AMD A12-9800 vs Intel Pentium Gold G6505T
The Intel Pentium Gold G6505T and AMD A12-9800 are near-perfect statistical twins in the Cinebench suite, separated by margins so thin they fall within run-to-run noise. The data shows the Pentium Gold takes a narrow edge in every recorded test, but the A12-9800 counters with more physical cores, a higher base and boost clock, and a larger L2 cache. The practical takeaway: for lightly threaded desktop work and everyday responsiveness, these two CPUs are effectively interchangeable; for any workload that can use the A12-9800’s four physical cores over the Pentium’s two cores with Hyper-Threading, the AMD part’s raw core count gives it a structural advantage that the benchmark scores do not fully capture.
Where Each One Wins
Intel Pentium Gold G6505T wins on raw benchmark score in all five head-to-head Cinebench runs, though the largest margin is a 0.2% lead in Cinebench R20 multi-core (1320 vs 1318). It also posts a 0.1% edge in Cinebench R23 multi-core (3143 vs 3140). In the three other tests—Cinebench R15 multi-core, R20 single-core, and R23 single-core—the scores are identical (316, 186, and 443 respectively), with the Pentium Gold credited as the winner only by tie-break convention. This means the Intel chip’s advantage is essentially negligible in absolute terms, but it does hold a consistent, if tiny, lead across every workload measured.
AMD A12-9800 wins on architectural merit rather than benchmark scores. It offers four physical cores versus the Pentium Gold’s two, a base clock of 3.80 GHz versus 3.60 GHz, and a boost clock of 4.20 GHz that the Intel part lacks entirely. In multi-threaded applications that scale beyond two threads, four physical cores can provide better sustained throughput than two cores with four threads, especially when the workload involves integer-heavy operations. The A12-9800 also has a 2 MB L2 cache versus the Pentium’s 256 KB per core (512 KB total), which can reduce memory latency in data-dense tasks. For users running multiple background applications or compiling code, the AMD chip’s core count is the more compelling spec, even if the Cinebench numbers show parity.
Architecture Differences
The two processors come from fundamentally different design eras. The Intel Pentium Gold G6505T is built on Intel’s 14 nm process using the Comet Lake-R architecture, part of the Comet Lake generation. It features 2 cores and 4 threads, with a base clock of 3.60 GHz and no boost clock. The cache layout is per-core: 64 KB L1 and 256 KB L2 per core, plus a shared 4 MB L3 cache. It supports DDR4 memory over a dual-channel bus with 42.7 GB/s bandwidth, and it has 16 PCIe Gen 3 lanes from the CPU. The integrated graphics are UHD Graphics 630. The TDP is 35 watts, and it uses the Intel Socket 1200.
The AMD A12-9800 is a 28 nm part from GlobalFoundries, based on the Excavator architecture and Bristol Ridge codename. It has 4 cores and 4 threads, with a base clock of 3.80 GHz and a boost clock of 4.20 GHz. The cache is 320 KB L1 and 2 MB L2, with no L3 cache at all. Memory support is DDR4 dual-channel with 38.4 GB/s bandwidth, slightly lower than the Intel part. It provides 8 PCIe Gen 3 lanes from the CPU, half the Intel’s allocation. The integrated graphics are Radeon R7. The TDP is 65 watts, nearly double the Pentium’s, and it uses AMD Socket AM4. The die size is 250 mm² with 3,100 million transistors, versus the Intel’s unspecified die dimensions.
The absence of an L3 cache on the AMD part is a critical architectural difference. The Intel chip’s 4 MB shared L3 cache can hold frequently accessed data closer to the cores, potentially offsetting the AMD’s larger L2. Meanwhile, the AMD’s higher clock speeds (3.80/4.20 GHz vs 3.60 GHz) and extra physical cores suggest it was designed for throughput, while the Intel’s lower TDP and newer process node point to efficiency.
Head-to-Head Benchmarks
The Cinebench results are remarkably close across the board. In Cinebench R15 multi-core, both CPUs score exactly 316, a dead heat. The Pentium Gold is credited with the win, but the delta is 0%. Moving to Cinebench R20 multi-core, the Intel part scores 1320 against the AMD’s 1318, a 0.2% lead—the largest margin in the entire comparison. In Cinebench R23 multi-core, the Intel scores 3143 versus 3140, a 0.1% edge. In single-core tests, the two are perfectly tied: 186 in R20 single-core and 443 in R23 single-core for both.
These numbers tell a consistent story: the two processors deliver identical single-threaded performance and nearly identical multi-threaded performance, despite the AMD having twice the physical core count. The most likely explanation is that the A12-9800’s Excavator architecture has weaker per-core efficiency than Intel’s Comet Lake, so its four cores at 3.80/4.20 GHz roughly match the Intel’s two cores with four threads at 3.60 GHz. The benchmark delta of 0.2% in R20 multi-core is the only test where the difference exceeds a rounding error, and even that is well below what any user would perceive in real-world use.
The practical implication is that for Cinebench-style rendering workloads, there is no winner. The Intel chip’s 0.1-0.2% advantages are statistically meaningless. However, the fact that the AMD’s additional cores do not translate into a multi-core win suggests its architecture is less efficient per clock per core. If a workload were perfectly multi-threaded and cache-optimized, the AMD’s four cores might pull ahead, but the data shows they do not.
FAQ
Q: Which CPU is faster in single-core performance?
A: They are exactly tied. Both score 186 in Cinebench R20 single-core and 443 in Cinebench R23 single-core. The Intel Pentium Gold G6505T is credited with the win in both cases, but the delta is 0%.
Q: Does the AMD A12-9800’s four cores beat the Intel’s two cores in multi-core benchmarks?
A: No. The Intel Pentium Gold G6505T wins all three multi-core tests, though by minimal margins: 316 vs 316 in R15 (0% delta), 1320 vs 1318 in R20 (0.2% delta), and 3143 vs 3140 in R23 (0.1% delta). The AMD’s extra cores do not produce a measurable advantage.
Q: What is the TDP difference between the two?
A: The Intel Pentium Gold G6505T has a TDP of 35 watts, while the AMD A12-9800 has a TDP of 65 watts. The Intel part is significantly more power-efficient on paper.
Q: Do both CPUs support the same memory type?
A: Yes, both support DDR4 memory in dual-channel mode. However, the Intel part has a higher memory bandwidth of 42.7 GB/s versus the AMD’s 38.4 GB/s.
Q: Which CPU has a larger cache?
A: The AMD A12-9800 has a larger L2 cache (2 MB vs 256 KB per core on the Intel) and a larger L1 cache (320 KB vs 64 KB per core). However, the Intel Pentium Gold G6505T has a 4 MB shared L3 cache, while the AMD has no L3 cache at all.
Q: What is the average benchmark score difference?
A: The Intel Pentium Gold G6505T has an average benchmark score of 1082, and the AMD A12-9800 has an average of 1081. The Intel part’s nearest rival list shows a 0.1% delta over the AMD, while the AMD’s list shows a -0.1% delta versus the Intel.
Specification Differences
| Specification | Intel Pentium Gold G6505T | AMD A12-9800 |
|---|---|---|
| Cores | 2 | 4 |
| Threads | 4 | 4 |
| Base Clock | 3.60 GHz | 3.80 GHz |
| Boost Clock | None | 4.20 GHz |
| TDP | 35 W | 65 W |
| Socket | Intel Socket 1200 | AMD Socket AM4 |
| Architecture | Comet Lake | Excavator |
| Codename | Comet Lake-R | Bristol Ridge |
| Process Node | 14 nm | 28 nm |
| Foundry | Intel | GlobalFoundries |
| L1 Cache | 64 KB (per core) | 320 KB |
| L2 Cache | 256 KB (per core) | 2 MB |
| L3 Cache | 4 MB (shared) | None |
| Memory Bandwidth | 42.7 GB/s | 38.4 GB/s |
| PCIe Lanes | Gen 3, 16 Lanes (CPU only) | Gen 3, 8 Lanes (CPU only) |
| Integrated Graphics | UHD Graphics 630 | Radeon R7 |
| Transistors | Not specified | 3,100 million |
| Die Size | Not specified | 250 mm² |
| Release Date | 2021-03-15 | 2017-07-26 |
| Launch MSRP | $75 | Not specified |
| Part Number | SRH3X | AD9800AUABBOXAD9800AUM44AB |