SYSTEM ANALYZER

Rate My PC: AMD Ryzen 5 7500F + NVIDIA GeForce RTX 3070

Get a comprehensive performance analysis of your gaming rig with detailed benchmarks, bottleneck detection, and upgrade recommendations

88 / 100
HIGH-END

Power Build

Top 12% of systems. Excellent for 1440p Ultra or 4K High gaming.

1440p Ultra4K High

System Balance Analysis

CPU vs GPU performance ratio
Well Balanced
CPU
86%
VS
GPU
90%
PROCESSOR

AMD Ryzen 5 7500F

24,964 Benchmark Score
Top 14% Market Ranking
View Full Specs →
GRAPHICS CARD

NVIDIA GeForce RTX 3070

17,208 Benchmark Score
Top 10% Market Ranking
View Full Specs →

Market Position

How your build compares to others
Budget
0-30
Mid-Range
30-60
High-End
60-85
Enthusiast
85-100
Your Build

Game Performance Benchmarks

Real-world 4K FPS in popular titles
View All Games →

Performance Insights

Tips to maximize your system

Strong Performance

Excellent for 1440p gaming. Most games will run at high/ultra settings smoothly.

Compatible Games See what you can play Compare CPUs Find upgrades Compare GPUs Find upgrades

Performance Tiers Explained

90-100

Ultimate

4K Ultra gaming, VR ready, ray tracing enabled, professional workloads

4K 60+ FPS VR Ready
70-89

High-End

1440p Ultra or 4K High settings, excellent for modern AAA titles

1440p Ultra 4K High
50-69

Mid-Range

1080p Ultra or 1440p Medium, great value for most gamers

1080p Ultra 1440p Med
30-49

Entry Level

1080p Medium settings, suitable for eSports and older titles

1080p Med eSports
0-29

Legacy

Basic gaming, older titles, consider upgrading for modern games

720p-1080p Low Older Games

AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 form a desktop pairing that lands in the 69th percentile among all CPU-GPU combinations. The 6-core Zen 4 processor drives a 61st-percentile Ampere GPU, producing a balanced 1080p and 1440p gaming platform with measured frame rates that show clear scaling trends across resolutions. This analysis examines the component-level data, workload-specific behavior, and upgrade implications for this pairing.

GPU Analysis

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture using the GA104 chip, manufactured on Samsung's 8 nm process with 17,400 million transistors across a 392 mm² die. The GPU operates at a base clock of 1500 MHz and boosts to 1725 MHz, with memory running at 1750 MHz effectively delivering 14 Gbps across a 256-bit bus. This configuration yields 448.0 GB/s of memory bandwidth, supported by 8 GB of GDDR6 VRAM.

The GPU contains 5888 shading units, 184 texture mapping units, and 96 raster output units. For accelerated workloads, it includes 46 RT cores and 184 tensor cores, providing dedicated hardware for ray tracing and AI-based tasks. The FP32 compute throughput is 20.31 TFLOPS, with FP16 performance matching at 20.31 TFLOPS in a 1:1 ratio. Pixel fill rate reaches 165.6 GPixel/s, while texture fill rate hits 317.4 GTexel/s.

Benchmark results place the RTX 3070 in the 61st percentile among all GPUs, with an average benchmark score of 17208. The nearest rival is the AMD Radeon RX 7600 XT, which scores 17083 — a 0.7% delta in favor of the RTX 3070. The NVIDIA GeForce GTX 690 sits 1% behind at 17037, while the AMD Radeon HD 7970M trails by 1.1% at 17019. The NVIDIA Tesla K40c scores 17468, putting it 1.5% ahead of the RTX 3070 in aggregate benchmarks.

In 3DMark Steel Nomad DX12, the GPU scores 3162, reflecting modern DirectX 12 rendering performance. Geekbench OpenCL returns 112821, while Vulkan scores 21022. Passmark results show a G3D score of 22214 and GPU compute of 11195. The DirectX 11 score of 182 and DirectX 10 score of 150 indicate legacy API performance, while DirectX 12 scores 85. The G2D score of 1001 covers 2D operations.

The 448.0 GB/s bandwidth and 8 GB VRAM capacity make this GPU suitable for 1080p and 1440p gaming with high texture settings. The 46 RT cores enable ray tracing, though the measured frame rates at 4K in demanding titles suggest RT workloads should remain at lower resolutions. The 20.31 TFLOPS FP32 throughput supports content creation tasks like video encoding and 3D rendering that leverage CUDA cores.

Benchmark Performance

The CPU average benchmark score is 24964, placing it in the 77th percentile among all CPUs. The GPU average benchmark score is 17208, at the 61st percentile. Combined, this desktop pairing achieves a 69th percentile ranking among all CPU-GPU combinations.

The CPU's nearest rivals show tight competition. The Intel Core i7-11850H scores 24935, a 0.1% delta in favor of the Ryzen 5 7500F. The AMD Ryzen 5 8400F scores 25005, putting it 0.2% ahead. The Intel Core i7-13620H scores 24911, trailing by 0.2%, while the Intel Core 5 210H scores 24872, a 0.4% gap. This places the Ryzen 5 7500F in a performance cluster where differences are within measurement noise.

The GPU's nearest rivals similarly show marginal differences. The RX 7600 XT trails by 0.7%, the GTX 690 by 1%, and the HD 7970M by 1.1%. The Tesla K40c leads by 1.5%. These deltas indicate the RTX 3070 sits in a well-populated performance band where no single rival holds a decisive advantage.

Measured FPS data across 53 games shows an average of 137.6 FPS at the settings tested, placing this pair at rank 1513 out of 3861 pairs. This ranking reflects the 69th combined percentile, indicating solid mid-high tier performance. The CPU's 77th percentile and GPU's 61st percentile create a pairing where the processor has more headroom than the graphics card, which matters for CPU-bound scenarios.

CPU Analysis

The AMD Ryzen 5 7500F is a 6-core, 12-thread desktop processor from the 7000 series, built on Zen 4 architecture with the Raphael codename. It uses TSMC's 5 nm process with 6,570 million transistors on a 71 mm² die. Base clock is 3.70 GHz with a boost clock of 5.00 GHz, operating at a 65 W TDP. The CPU supports DDR5 memory in dual-channel configuration, yielding 83.2 GB/s of memory bandwidth. ECC memory support is enabled.

Cache hierarchy includes 64 KB L1 per core, 1 MB L2 per core, and 32 MB shared L3 cache. The CPU connects via PCIe Gen 5 with 24 lanes from the processor. It was released in July 2023 with a launch MSRP of $179. The multiplier is unlocked for overclocking, and it fits the AMD Socket AM5 platform.

The 3DMark multithreaded scores show scaling: 1902 for 2 threads, 3621 for 4 threads, 5372 for 8 threads, and 6376 for 16 threads, with max threads at 6379 and single thread at 974. This progression shows near-linear scaling up to 8 threads, then flattening beyond that, consistent with 6 physical cores and 12 threads. The 16-thread score being nearly identical to max threads (6376 vs 6379) indicates the scheduler effectively utilizes all available threads.

Cinebench results show R15 multicore at 2298 and single core at 324. R20 multicore reaches 9575 with single core at 1351. R23 multicore hits 22799 while single core scores 3218. Geekbench multicore returns 12362 with single core at 2374. These scores position the CPU strongly for single-threaded tasks, where the 5.00 GHz boost clock helps, and adequately for multithreaded workloads given the 6-core configuration.

Passmark tests show integer math at 79108, floating point at 47176, extended instructions at 22776, and data encryption at 17510. Data compression scores 305925, random string sorting 36191, and prime number finding 199. The multithread score is 26825 with single thread at 3841. Physics score is 1788. These numbers indicate strong integer performance for general computing and encryption, with balanced floating-point capability.

The 77th percentile ranking places this CPU above most processors in the database. The nearest rival deltas of 0.1% to 0.4% show it competes directly with mobile and desktop parts from Intel and AMD, though the Ryzen 5 7500F offers the AM5 platform advantage with DDR5 and PCIe Gen 5 support.

FAQ

Q: How does the Ryzen 5 7500F compare to its closest rival, the Intel Core i7-11850H?

A: The Ryzen 5 7500F scores 24964 on average, which is 0.1% higher than the Core i7-11850H's 24935. This delta is within measurement tolerance, making them statistically equivalent in aggregate benchmarks.

Q: What is the RTX 3070's VRAM capacity and bandwidth?

A: The RTX 3070 has 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. Memory runs at 1750 MHz effectively delivering 14 Gbps.

Q: Does the Ryzen 5 7500F support overclocking?

A: Yes, the multiplier is unlocked, allowing overclocking. The base clock is 3.70 GHz with a 5.00 GHz boost clock, and the CPU has a 65 W TDP.

Q: What is the RTX 3070's percentile ranking among all GPUs?

A: The RTX 3070 is in the 61st percentile with an average benchmark score of 17208. It outperforms the RX 7600 XT by 0.7% and trails the Tesla K40c by 1.5%.

Q: What memory type does the Ryzen 5 7500F support?

A: The CPU supports DDR5 memory in dual-channel configuration, achieving 83.2 GB/s bandwidth. ECC memory is also supported.

Q: How does the pair rank in measured FPS across games?

A: This CPU-GPU pair ranks 1513 out of 3861 pairs with an average of 137.6 FPS across tested games, placing it in the 69th combined percentile.

Q: What is the TDP of the RTX 3070 and what PSU is suggested?

A: The RTX 3070 has a 220 W TDP. The suggested power supply is 550 W, and it uses a 1x 12-pin power connector.

Balance and Bottleneck

The CPU sits at the 77th percentile while the GPU is at the 61st, indicating the processor has more relative headroom than the graphics card. In gaming workloads, this typically means the GPU becomes the limiting factor at higher resolutions, while the CPU can keep up at lower resolutions.

Measured FPS data confirms this pattern. At 1080p, many titles show high frame rates that stress the CPU's single-thread performance. Counter-Strike 2 reaches 209.9 FPS at 1080p, dropping to 140.5 at 1440p and 74.5 at 4K. This 1080p-to-4K scaling shows a 64.5% drop, indicating the GPU becomes more constrained as resolution increases. Similarly, Valorant hits 480.9 FPS at 1080p, 405.6 at 1440p, and 324.4 at 4K — a much smaller drop because the game is highly CPU-bound.

In GPU-heavy titles, the bottleneck shifts clearly to the graphics card. Cyberpunk 2077 runs at 64 FPS at 1080p, 46.4 at 1440p, and 30.4 at 4K. Red Dead Redemption 2 shows 56.7 FPS at 1080p, 45 at 1440p, and 28.4 at 4K. These titles show steep declines with resolution, confirming the GPU's 8 GB VRAM and 448.0 GB/s bandwidth are the limiting factors.

For CPU-bound titles like Minecraft and CS:GO, the processor's 77th percentile single-thread performance shines. CS:GO reaches 464.8 FPS at 1080p, while Minecraft hits 206 FPS at 1080p. These high frame rates exceed most display refresh rates, meaning the CPU can drive 240Hz+ monitors in esports titles.

The balanced picture shows 1080p gaming where the CPU can feed the GPU adequately in most titles, with some CPU-bound exceptions. At 1440p, the GPU becomes the primary limiter in AAA titles, while 4K performance is constrained by the GPU's 8 GB VRAM and bandwidth, with many titles falling below 60 FPS.

Upgrade Path and Platform

The Ryzen 5 7500F uses AMD Socket AM5, which supports DDR5 memory in dual-channel configuration. The platform provides PCIe Gen 5 with 24 lanes from the CPU, offering modern connectivity for high-bandwidth storage and future GPUs. The 65 W TDP allows for modest cooling requirements, though the unlocked multiplier permits overclocking within thermal limits.

The RTX 3070 uses PCIe 4.0 x16, which is backward compatible with the AM5 platform's PCIe Gen 5 slots. The GPU has a 220 W TDP with a suggested PSU of 550 W, leaving headroom for additional components. The dual-slot design and 242 mm length fit most mid-tower cases.

A sensible next upgrade for this platform would focus on the GPU, since the CPU has more headroom at the 77th percentile. The AM5 socket supports future Ryzen processors, allowing a CPU upgrade without changing the motherboard or memory. DDR5 memory support means current memory can carry over to a newer CPU.

For PSU headroom, the 550 W suggested PSU accommodates the 220 W GPU and 65 W CPU with room for drives and peripherals. A more powerful GPU would require a higher-wattage PSU, but the current pairing operates within the suggested specifications. The 1x 12-pin power connector on the GPU requires an adapter for standard PSUs, though this is a minor installation consideration.

The platform's PCIe Gen 5 support provides future-proofing for next-generation GPUs, though the current RTX 3070 runs at PCIe 4.0 speeds without bottleneck. Memory bandwidth of 83.2 GB/s from dual-channel DDR5 is sufficient for the 6-core CPU, and ECC support adds reliability for workstation tasks.

Gaming Performance

Measured FPS data covers 53 games at three resolutions with ultra settings. The average across all games is 137.6 FPS, placing this pair at rank 1513 of 3861. This data is measured, providing accurate performance expectations.

At 1080p, esports titles excel. Valorant leads at 480.9 FPS, followed by CS:GO at 464.8, CS2 at 209.9, and Rainbow Six Siege at 248. Minecraft reaches 206 FPS, Roblox 271.5, and To The Core 207.9. These titles leverage the CPU's strong single-thread performance and the GPU's high fill rate.

AAA titles at 1080p show playable frame rates. Call of Duty: Warzone hits 148.1 FPS, Control 86.2, Cyberpunk 2077 64, and Red Dead Redemption 2 56.7. Microsoft Flight Simulator reaches 74.3 FPS. The most demanding title, Ark: Survival Ascended, drops to 30 FPS at 1080p, indicating this game pushes beyond the GPU's capabilities.

At 1440p, performance remains strong for competitive titles but drops in AAA games. CS2 runs at 140.5 FPS, Valorant 405.6, and CS:GO 319. Warzone maintains 130.5 FPS. AAA titles see Cyberpunk at 46.4, Control at 68, and Red Dead Redemption 2 at 45. The Medium runs at 37 FPS, while Ark drops to 19 FPS. These results show 1440p is viable for most games, with some AAA titles requiring settings adjustments.

At 4K, only lighter titles maintain high frame rates. Valorant hits 324.4, Roblox 104.7, and CS2 74.5. Warzone manages 113.8 FPS. Most AAA titles fall below 60 FPS: Cyberpunk at 30.4, Red Dead Redemption 2 at 28.4, Control at 42.9, and Microsoft Flight Simulator at 41.4. Ark drops to 10 FPS. The 8 GB VRAM and 448.0 GB/s bandwidth limit 4K performance, making this resolution viable only for less demanding or competitive titles.

Build Overview

This desktop build pairs the AMD Ryzen 5 7500F with the NVIDIA GeForce RTX 3070, creating a mid-high tier system at the 69th combined percentile. The CPU, at the 77th percentile, provides strong single-thread and adequate multithread performance for a 6-core, 12-thread Zen 4 part. The GPU, at the 61st percentile, offers solid 1080p and 1440p gaming with 8 GB VRAM.

The platform uses AM5 with DDR5 memory, PCIe Gen 5, and ECC support, making it suitable for both gaming and light workstation use. The 65 W CPU TDP and 220 W GPU TDP total 285 W, well within the 550 W suggested PSU. The build class is desktop, confirming this is a stationary system rather than a laptop.

The pair's ranking of 1513 out of 3861 pairs places it in the upper third of all combinations. The average 137.6 FPS across games indicates strong overall gaming performance, with the CPU providing headroom for future GPU upgrades. The combined 69th percentile reflects a system that handles most modern games at 1080p and 1440p with high settings.

Who Should Build It

Gamers targeting 1080p high-refresh displays will find this pairing ideal. The measured 209.9 FPS in CS2, 464.8 in CS:GO, and 480.9 in Valorant at 1080p support 240Hz+ monitors in competitive titles. For 1440p, the system delivers 130+ FPS in Warzone and 140+ in CS2, suitable for 144Hz displays in most games.

Content creators working with video editing or 3D rendering will benefit from the CPU's 22799 Cinebench R23 multicore score and the GPU's 20.31 TFLOPS FP32 compute. The 8 GB VRAM supports moderate 1080p and 1440p rendering workloads, while the tensor cores accelerate AI-based tasks.

Software developers will appreciate the 79108 Passmark integer math score and 305925 data compression score for compilation and data processing. The 12 threads handle parallel builds, while the 3841 single-thread score ensures responsive IDE performance.

Students and small business users get a capable workstation with ECC memory support and 83.2 GB/s memory bandwidth. The 65 W CPU TDP keeps power costs low, and the platform's upgrade path via AM5 extends system longevity.

Usage Scenarios

High-refresh gaming: The 1080p frame rates in CS2 (209.9), Valorant (480.9), and CS:GO (464.8) exceed 240Hz thresholds, making this build suitable for competitive play. At 1440p, CS2 maintains 140.5 FPS, supporting 144Hz monitors in esports titles.

Streaming: The GPU's 184 tensor cores and 20.31 TFLOPS FP32 support hardware encoding, while the CPU's 12 threads handle game and stream overhead. The 77th percentile CPU ensures minimal frame drops during simultaneous encoding and gaming.

Video editing: The Cinebench R23 multicore score of 22799 provides solid export performance, while the GPU's 20.31 TFLOPS accelerates effects and rendering. The 8 GB VRAM handles 1080p and light 4K timelines, with 83.2 GB/s memory bandwidth for asset loading.

3D rendering: GPU compute score of 11195 in Passmark and 112821 in Geekbench OpenCL indicate capable rendering throughput. The 46 RT cores support ray-traced workloads, though render times at 4K will be long given the measured gaming performance.

Software development: Passmark integer math at 79108 and data encryption at 17510 indicate strong compile and cryptographic performance. The 12 threads handle parallel builds, while 83.2 GB/s memory bandwidth reduces large project load times.

Student and office work: The 3841 Passmark single-thread score ensures responsive applications, while the 65 W TDP keeps energy consumption low. The 305925 data compression score speeds file archiving, and ECC memory support adds data integrity for important documents.