To The Core
This combination delivers exceptional performance with an average of 202 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 83 | 103 | 118 | 147 |
| 1440p QHD | 146 | 183 | 214 | 252 |
| 1080p Full HD | 222 | 273 | 318 | 372 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with Intel Core i3-12100F + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
The Intel Core i3-12100F and NVIDIA GeForce RTX 3070 Ti pairing delivers an exceptionally smooth experience in To The Core, an idle game that is clearly far more dependent on the graphics card than the processor. The measured frame rates are extremely high across all tested resolutions and settings, indicating that this combination is well-suited for high-refresh-rate displays. The data shows a system that rarely struggles, with the primary challenge being how to leverage the surplus performance for the best visual experience.
Resolution Scaling
The transition from 1080p to 4K reveals a predictable and significant performance drop, but the absolute numbers remain impressive. At 1080p with High settings, the combo produces 273.1 FPS. Moving to 1440p reduces that to 182.7 FPS, a drop of approximately 33%. At 4K, the average frame rate falls to 102.8 FPS, which is still well above the 60 FPS threshold for smooth gameplay. This scaling pattern strongly suggests that the RTX 3070 Ti is the limiting component as resolution increases; the workload on the GPU grows substantially, while the CPU's role becomes less critical.
The performance delta between Low and Ultra settings widens as resolution increases. At 1080p, the gap between Low (371.5 FPS) and Ultra (221.6 FPS) is 149.9 FPS. At 4K, that gap narrows to 63.3 FPS (146.6 FPS on Low versus 83.3 FPS on Ultra). This indicates that at 1080p, the CPU is capable of feeding the GPU enough data to hit very high frame rates, but the GPU is still the bottleneck when settings are cranked up. At 4K, the GPU is so heavily loaded that even dropping to Low settings cannot push frame rates to the same stratospheric levels, confirming that the RTX 3070 Ti is the primary constraint at higher resolutions.
Benchmark results indicate that the RTX 3070 Ti sits in the 74th percentile of all GPUs, with an average benchmark score of 30849. Its nearest rivals include the AMD Radeon RX 6700, which scores 0.8% higher, and the AMD Radeon RX 590 GME, which scores 0.3% lower. This places the GPU in a solid mid-to-high tier, and the measured FPS figures in To The Core reflect this standing, offering playable 4K performance and excellent high-refresh-rate 1440p performance. The CPU, meanwhile, is in the 72nd percentile, with its closest competitor being the AMD Ryzen Threadripper PRO 3975WX, which is a 0.1% difference. This suggests a well-balanced pairing where neither component is a severe weak link, though the GPU takes on more of the load as resolution rises.
CPU Role
The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture. It has a base clock of 3.30 GHz and a boost clock of 4.30 GHz. In a game like To The Core, which is an idle genre title, the CPU's role is often less demanding than in fast-paced action games. The data supports this, as the CPU's performance is sufficient to keep up with the GPU at all tested settings, even at 1080p where frame rates exceed 370 FPS.
The CPU's benchmark scores show a strong single-threaded performance, which is often critical for game logic. It scores 893 in 3dMark single-thread and 1681 in Cinebench R23 single-core. Its multi-threaded performance is also respectable, with a Cinebench R23 multicore score of 11912. These scores indicate that while it lacks the core count of higher-end processors, its per-core performance is robust. In the context of To The Core, this means the i3-12100F is not a limiting factor; the frame rates are dictated by the GPU's rendering capabilities rather than the CPU's processing power.
The processor's 12 MB of shared L3 cache and support for DDR4 and DDR5 memory provide a solid foundation. Its nearest rival, the Intel Core i7-7700K, scores 1.8% higher in average benchmarks, but the newer architecture and higher clocks of the i3-12100F ensure it holds its own. Ultimately, the CPU role here is to provide a stable platform without introducing bottlenecks, and the measured FPS data confirms it does exactly that. The performance headroom is so large that even the most demanding preset at 1080p, Ultra, yields 221.6 FPS, leaving no doubt that the CPU is keeping pace.
FAQ
*Q: What is the best resolution to play To The Core with this hardware?*
A: The data shows that 2560x1440 offers an excellent balance. At High settings, it delivers 182.7 FPS, which is well above the refresh rate of most high-end monitors. While 1920x1080 provides higher frame rates (273.1 FPS on High), 1440p offers a significant visual upgrade without sacrificing smoothness, as even 4K High is playable at 102.8 FPS.
Q: How does the RTX 3070 Ti compare to its closest rivals in terms of raw performance?
A: The RTX 3070 Ti has an average benchmark score of 30849, placing it in the 74th percentile. Its nearest rival, the AMD Radeon RX 6700, scores 0.8% higher, while the AMD Radeon RX 590 GME scores 0.3% lower. This indicates the 3070 Ti is a strong performer, and these relative strengths are reflected in its ability to maintain high FPS in To The Core.
Q: Is the Intel Core i3-12100F a bottleneck for the RTX 3070 Ti in this game?
A: No. The measured FPS data shows that the system is capable of producing 371.5 FPS at 1080p Low settings, which indicates the CPU can feed the GPU quickly. The performance drop from 1080p to 4K is consistent with GPU limitations, not CPU limitations. The i3-12100F's single-thread score of 1681 in Cinebench R23 is ample for this game's logic.
Q: What is the performance difference between Low and Ultra settings at 4K?
A: At 3840x2160, the average FPS on Low settings is 146.6, while on Ultra it drops to 83.3. This is a difference of 63.3 FPS, showing that the Ultra preset imposes a significant load on the GPU. Both are playable, but the choice depends on whether you prefer higher frame rates or maximum visual fidelity.
Q: How does this combo rank among all tested combinations for this game?
A: The combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 3070 Ti ranks 700th out of 1756 tested combos in To The Core. This places it in the upper half of tested systems, indicating it is a solid performer but not at the very top end of the spectrum.
Q: Can this system handle a 144Hz monitor at 1440p?
A: Yes, comfortably. At 2560x1440 with High settings, the average FPS is 182.7, and even at Ultra settings, it maintains 145.5 FPS. Both figures are above the 144Hz threshold, ensuring a consistently smooth experience on such a display.
Settings Recommendations
For the best experience, the High preset at 2560x1440 is the sweet spot. It delivers an average of 182.7 FPS, which is more than enough for a high-refresh-rate monitor, while providing a significant visual upgrade over Low or Medium settings. The jump from Medium (214.1 FPS) to High (182.7 FPS) is a 31.4 FPS cost, but the visual fidelity gains are typically worth it. Pushing to Ultra at this resolution drops the frame rate to 145.5 FPS, which is still playable but offers diminishing returns for the performance hit.
At 4K, the High preset is the recommended choice. It produces 102.8 FPS, which is smoother than the 83.3 FPS on Ultra, and the visual difference between High and Ultra is often less noticeable at higher resolutions. For players with a 4K 60Hz display, High settings will provide a flawless experience. At 1080p, all presets are overkill, with even Ultra hitting 221.6 FPS. In this case, the Ultra preset can be used freely to maximize image quality, as the performance remains exceptionally high. The data indicates that the Ultra preset is best reserved for 1080p, where the GPU has plenty of headroom.
How This Combo Ranks
The Intel Core i3-12100F and NVIDIA GeForce RTX 3070 Ti combination ranks 700th out of 1756 tested combos in To The Core. This places it in the 60th percentile of all tested systems, indicating that it is a strong performer, though there are many faster configurations. The ranking reflects the balance of the parts; the GPU is a high-end component from its generation, and the CPU, while entry-level, has enough single-thread performance to avoid being a major drag in this specific title.
The GPU’s individual standing at the 74th percentile, with a score of 30849, is higher than the combo’s overall rank, which suggests that the CPU is holding the system back slightly in the grand scheme of all tested combos. However, in To The Core, the impact is minimal, as the measured FPS are extremely high. The combo’s rank reflects the fact that for this game, a 4-core CPU paired with a powerful GPU is a viable and effective strategy, delivering excellent performance without the need for a more expensive, higher-core-count processor.
Measured FPS Breakdown
At 1920x1080, the system produces its highest frame rates. On Low settings, it averages 371.5 FPS. Medium settings reduce this to 317.5 FPS, a drop of 54.0 FPS. High settings yield 273.1 FPS, and Ultra settings bring it down to 221.6 FPS. This shows a clear linear scaling with settings, and even the lowest figure is well above any refresh rate currently on the market.
At 2560x1440, the performance remains exceptional. Low settings average 251.6 FPS. Medium settings drop to 214.1 FPS, a difference of 37.5 FPS. High settings produce 182.7 FPS, and Ultra settings average 145.5 FPS. The scaling from Low to Ultra is a 106.1 FPS reduction, but all presets are highly playable.
At 3840x2160, the GPU is heavily tasked. Low settings still manage an average of 146.6 FPS. Medium settings reduce this to 118.4 FPS, a 28.2 FPS drop. High settings average 102.8 FPS, and Ultra settings produce 83.3 FPS. The performance is still smooth, but the difference between Low and Ultra is a substantial 63.3 FPS, highlighting the GPU's workload at 4K. Across all resolutions, the pattern is consistent: the RTX 3070 Ti is the primary driver of performance, and the i3-12100F provides sufficient support to maintain high frame rates.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 3070 Ti in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 146.6 |
| 3840x2160 | Medium | 118.4 |
| 3840x2160 | High | 102.8 |
| 3840x2160 | Ultra | 83.3 |
| 2560x1440 | Low | 251.6 |
| 2560x1440 | Medium | 214.1 |
| 2560x1440 | High | 182.7 |
| 2560x1440 | Ultra | 145.5 |
| 1920x1080 | Low | 371.5 |
| 1920x1080 | Medium | 317.5 |
| 1920x1080 | High | 273.1 |
| 1920x1080 | Ultra | 221.6 |
To The Core with ii3-12100F + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 3070 Ti + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with ii3-12100F + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.