To The Core
This combination provides smooth gameplay with an average of 117 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 59 | 68 | 82 |
| 1440p QHD | 86 | 105 | 122 | 145 |
| 1080p Full HD | 130 | 158 | 186 | 218 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with Intel Core i3-12100F + NVIDIA GeForce GTX 1070, In-Depth Analysis
The Intel Core i3-12100F paired with the NVIDIA GeForce GTX 1070 presents a compelling study in system balance for To The Core. The measured data reveals a combination that is heavily influenced by resolution, with the CPU demonstrating remarkable headroom at lower settings while the GPU becomes the definitive bottleneck as pixel counts climb. This analysis breaks down the measured FPS across all settings and resolutions, contextualizes the combo's standing among 1,756 tested configurations, and examines the specific roles of the processor and graphics card in shaping the final experience.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The scaling behavior from 1920x1080 to 3840x2160 is the single most revealing aspect of this dataset. At 1080p with Low settings, the combo produces an average of 218.2 FPS. Moving to 1440p Low drops that figure to 144.5 FPS, a 33.8% reduction. At 4K Low, the average falls to 81.9 FPS, which is just 37.5% of the 1080p Low result. This dramatic collapse is a textbook sign of a GPU-limited scenario; the GTX 1070’s rendering pipeline is being saturated as the pixel workload quadruples.
The pattern persists across all settings. On High settings, the FPS drops from 157.9 at 1080p to 105.1 at 1440p (a 33.4% decrease) and then to 58.6 at 4K (a 62.9% decrease from 1080p). The Ultra preset shows the same trajectory: 129.7 FPS at 1080p, 86 at 1440p, and 47.9 at 4K. The consistency of these percentage drops—roughly a one-third reduction when moving from 1080p to 1440p, and another near-halving when jumping to 4K—indicates that the GPU’s fill rate and memory bandwidth are the primary constraints. The GTX 1070’s 256.3 GB/s bandwidth and 107.7 GPixel/s pixel rate are being taxed heavily, and the data suggests that the i3-12100F is rarely the limiting factor, even at 1080p where CPU overhead is typically highest.
The fact that the 4K Ultra result (47.9 FPS) barely stays above 60% of the 4K Low result (81.9 FPS) further confirms that the GPU is working at its absolute ceiling. The CPU, with its 4.30 GHz boost clock, has enough single-threaded muscle to feed the GPU at lower resolutions, but the data implies that the GTX 1070 simply cannot keep pace with the demands of 4K rendering in this title, regardless of preset.
How This Combo Ranks — use comboRankInGame vs other tested combos
Among the 1,756 combinations tested for To The Core, this pairing of the Core i3-12100F and GeForce GTX 1070 lands at rank 1490. That places it in the 15th percentile of all tested systems, meaning 85% of the combos in the database deliver higher average frame rates. This low standing is not a condemnation of either component in isolation but rather a reflection of the GTX 1070's age and position in the GPU hierarchy. The GPU’s own benchmark scores show it sitting at the 51st percentile versus all GPUs, while the CPU ranks at the 72nd percentile versus all CPUs, so the pairing is effectively a high-performing processor held back by a mid-tier graphics card.
The deltaPct values from the GPU’s nearest rivals are telling. The GTX 1070’s average benchmark score of 12,331 is just 1.3% lower than the GeForce GTX 880M and 1.4% lower than the GTX 1650 SUPER. The fact that it sits within 2% of these other cards in synthetic benchmarks, yet the combo rank is so low, suggests that the game’s engine is particularly sensitive to the GTX 1070’s specific capabilities. The CPU’s nearest rival, the Intel Core i7-7700K, scores only 1.8% higher on average, so the processor is not the source of the combo’s poor ranking. The data strongly implies that to move up significantly in the comboRankInGame, a GPU upgrade would be necessary, as the i3-12100F has substantial headroom remaining.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, built on Intel’s 10 nm process. It features a base clock of 3.30 GHz and a boost clock of 4.30 GHz. In an idle game like To The Core, which typically does not demand massive multi-threaded throughput, the CPU’s single-thread performance is paramount. The data backs this up: the i3-12100F scores 893 in 3dMark single-thread and 1,681 in Cinebench R23 single-core, which are strong figures for a desktop chip. Its passmark single-thread score of 3,444 further indicates that it has the per-core speed to handle game logic and draw calls efficiently.
The multi-threaded scores, while adequate, are not the story here. The CPU achieves 5,003 in Cinebench R20 multi-core and 11,912 in Cinebench R23 multi-core, which is respectable for a quad-core part, but the game’s frame rates at 1080p Low (218.2 FPS) suggest that the CPU is not being maxed out. If the processor were the limiting factor, we would expect to see frame rates plateau or even drop when lowering the resolution or settings, as the GPU would be waiting on the CPU. Instead, the FPS scales almost linearly with the GPU workload, confirming that the i3-12100F is supplying frames faster than the GTX 1070 can render them. The CPU’s 12 MB of shared L3 cache and dual-channel memory support (DDR4 and DDR5) provide sufficient bandwidth to avoid stalling the GPU pipeline, and the data indicates that this processor has more than enough headroom for this specific title.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The full dataset provides a clear matrix of performance. At 1920x1080, the average FPS ranges from 129.7 on Ultra to 218.2 on Low, with Medium at 186.1 and High at 157.9. These are all exceptionally playable numbers, even the Ultra preset, which remains above 120 FPS. The scaling from Low to Ultra at 1080p represents a 40.6% performance drop, which is a significant cost for the visual fidelity gains.
Moving to 2560x1440, the averages are 86 for Ultra, 105.1 for High, 122.3 for Medium, and 144.5 for Low. The gap between Low and Ultra at this resolution is 40.5%, nearly identical to the 1080p gap, again showing that the GPU is scaling consistently with the settings. At 3840x2160, the numbers become more demanding: Ultra drops to 47.9 FPS, High to 58.6, Medium to 67.6, and Low to 81.9. The delta between Low and Ultra at 4K is 41.5%, which is remarkably consistent with the other resolutions. This uniformity in percentage drops across all three resolutions is a strong indicator that the game’s settings affect the GPU in a linear fashion, and that the GTX 1070 is the sole performance arbiter in every configuration tested.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
*Q: Is this combo capable of running To The Core at 1440p with high settings?*
A: Yes. The measured average FPS at 2560x1440 with High settings is 105.1, which is well above the 60 FPS threshold for smooth gameplay. The data shows that even 4K High is playable at 58.6 FPS, though it dips below the 60 FPS mark.
Q: How does the GTX 1070 compare to its closest rivals in synthetic benchmarks?
A: The GTX 1070 has an average benchmark score of 12,331. This is 0.7% higher than the Quadro K4200, 1.3% lower than the GTX 880M, and 1.4% lower than the GTX 1650 SUPER. The performance differences are minimal, indicating that any of these cards would perform similarly in this game.
Q: What is the best resolution for this combo if the goal is to exceed 120 FPS?
A: At 1920x1080 with Medium settings, the combo achieves 186.1 FPS. Even the Ultra preset at 1080p yields 129.7 FPS. To maintain over 120 FPS, 1080p with any preset is sufficient, while 1440p requires Low settings to hit 144.5 FPS.
Q: Is the i3-12100F a bottleneck for the GTX 1070 in this game?
A: The data suggests no. At 1080p Low, the combo reaches 218.2 FPS, which is a very high frame rate. If the CPU were the bottleneck, we would see diminishing returns when lowering the resolution. Instead, FPS scales consistently with GPU load, indicating the CPU has ample headroom.
Q: What is the combo's ranking among all tested systems?
A: It ranks 1490 out of 1756 combos tested for To The Core. This places it in the lower percentile, primarily due to the GPU's age and performance class, not the CPU, which ranks at the 72nd percentile versus all CPUs.
Q: How much performance is lost when moving from 1080p to 4K on the Ultra preset?
A: The average FPS drops from 129.7 at 1080p to 47.9 at 4K on Ultra, representing a 63.1% reduction. This is the largest relative drop across all presets, highlighting the extreme demand of 4K rendering on the GTX 1070.
Settings Recommendations — which preset gives the best experience per the measured rows
For players targeting a 60 FPS baseline, the data shows that 4K Ultra is a marginal proposition at 47.9 FPS, while 4K High is viable at 58.6 FPS. The most balanced experience for a standard 60 Hz monitor would be 1440p with High settings, achieving 105.1 FPS, which provides a substantial cushion above the refresh rate and allows for smoother frame pacing. If the display is 144 Hz, then 1080p with Ultra settings (129.7 FPS) or 1080p with High (157.9 FPS) are the optimal choices, as both exceed 120 FPS.
For those who prioritize competitive frame rates above all else, the 1080p Low preset delivers 218.2 FPS, but the jump to Medium (186.1 FPS) costs only 14.7% performance while likely offering a noticeably improved visual experience. Given that the GTX 1070 has 8 GB of VRAM, memory capacity is not a concern at any of these settings, so the recommendation is to avoid Low preset unless absolute maximum frame rates are required. The smart choice is to start at 1080p Ultra and adjust the resolution downward only if the frame rate falls below the target, as the GPU is the limiting factor and will scale predictably.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1070 is built on the Pascal architecture using the GP104 chip, fabricated on a 16 nm process at TSMC. It features 1,920 shading units, 120 TMUs, and 64 ROPs. The GPU’s base clock is 1,506 MHz with a boost clock of 1,683 MHz. In the measured results, the GPU’s role is clearly that of the primary bottleneck. The 8 GB of GDDR5 memory on a 256-bit bus provides 256.3 GB/s of bandwidth, which is sufficient for 1080p and 1440p gaming but is taxed at 4K. The 4K Ultra result of 47.9 FPS indicates that the card is hitting its limits in terms of both fill rate and memory throughput.
The GPU’s compute capabilities, rated at 6.463 TFLOPS for FP32, are moderate by modern standards, but for an idle game like To The Core, the geometry and shading requirements are not extreme. The data shows that the GTX 1070 can handle 1080p Ultra at 129.7 FPS, which is a strong result. However, the frame rate drops by nearly half when moving to 4K Ultra, confirming that the card’s pixel rate of 107.7 GPixel/s is the limiting factor. The GPU’s percentile rank versus all GPUs is 51, placing it exactly in the middle of the pack, which aligns with its measured performance in this title: capable at mainstream resolutions but struggling to maintain high frame rates at 4K. The 8 GB VRAM never appears to be a constraint in the measured rows, as even the lowest FPS at 4K Ultra is not accompanied by a min FPS value that would suggest stuttering from memory exhaustion.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce GTX 1070 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.9 |
| 3840x2160 | Medium | 67.6 |
| 3840x2160 | High | 58.6 |
| 3840x2160 | Ultra | 47.9 |
| 2560x1440 | Low | 144.5 |
| 2560x1440 | Medium | 122.3 |
| 2560x1440 | High | 105.1 |
| 2560x1440 | Ultra | 86.0 |
| 1920x1080 | Low | 218.2 |
| 1920x1080 | Medium | 186.1 |
| 1920x1080 | High | 157.9 |
| 1920x1080 | Ultra | 129.7 |
To The Core with GTX 1070 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with ii3-12100F + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.