Fortnite
This combination provides smooth gameplay with an average of 72 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 19 | 30 | 39 | 57 |
| 1440p QHD | 41 | 57 | 75 | 107 |
| 1080p Full HD | 60 | 92 | 119 | 171 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fortnite with Intel Core i3-12100F + NVIDIA GeForce GTX 1070, In-Depth Analysis
The Intel Core i3-12100F paired with the NVIDIA GeForce GTX 1070 delivers a highly playable Fortnite experience, but the data reveals a system where the graphics card is the primary constraint at higher resolutions. This combination ranks in the lower-middle tier of tested configurations, with the CPU proving more than capable of feeding the GPU at 1080p, while the GPU’s Pascal architecture begins to show its age as pixel count increases. The measured frames per second (FPS) across the three resolutions and four settings presets show a clear, consistent scaling pattern that favors competitive play at lower settings.
Resolution Scaling
The FPS drop from 1920x1080 to 3840x2160 is steep and linear across all settings, indicating a GPU-bound workload at higher resolutions. At Low settings, the average FPS falls from 171 at 1080p to 107 at 1440p, a 37.4% decrease, and then plummets to 57.4 at 4K, representing a 66.4% reduction from the 1080p baseline. This pattern confirms that the GTX 1070’s 256-bit memory bus and 256.3 GB/s bandwidth are insufficient to sustain high framerates at 4K, even on the least demanding preset.
The scaling is even more dramatic on the Ultra preset, where the average FPS drops from 59.5 at 1080p to 40.8 at 1440p (a 31.4% loss) and then to 19.3 at 4K (a 67.6% loss from 1080p). This suggests that the GPU’s 8 GB of GDDR5 memory and its 1920 shading units are overwhelmed by the combination of high resolution and maximum visual effects. The gap between Low and Ultra at 4K is 38.1 FPS, which is smaller than the 111.5 FPS gap seen at 1080p, further proving that the GPU becomes the limiting factor as resolution increases.
The data shows that 1440p is a viable middle ground, with the High preset achieving 57.2 FPS, which is nearly identical to the 4K Low result of 57.4 FPS. This indicates that users can trade resolution for visual fidelity without a significant performance hit, but the system’s sweet spot is clearly at 1920x1080, where even the Ultra preset maintains a playable 59.5 FPS. The scaling behavior strongly suggests that the CPU, with its 4 cores and 8 threads, is not the bottleneck; the GPU’s fill rate and memory subsystem are the primary drivers of the performance degradation at higher resolutions.
GPU Role
The GTX 1070’s specifications directly explain its performance characteristics in Fortnite. With a base clock of 1506 MHz and a boost clock of 1683 MHz, the card operates within a narrow frequency range, which helps maintain consistent frame pacing. The 8 GB of GDDR5 memory on a 256-bit bus provides 256.3 GB/s of bandwidth, which is adequate for 1080p and 1440p at medium settings but becomes a limiting factor at 4K, where the Ultra preset’s texture streaming demands exceed what the memory subsystem can efficiently deliver.
The GPU’s FP32 performance of 6.463 TFLOPS and its texture rate of 202.0 GTexel/s are consistent with its mid-range positioning, but the data shows that these resources are not enough for the highest settings at 4K. The card’s 64 ROPs and 120 TMUs are fully utilized in Fortnite’s rendering pipeline, yet the average FPS of 19.3 at 4K Ultra indicates a severe bottleneck. This is a Pascal-generation card, and its DirectX 12 support (12_1) is present, but the benchmark results show that the architecture’s raw throughput is the limiting factor rather than any API inefficiency.
The GPU’s percentile ranking at 51 places it in the middle of all tested GPUs, and its nearest rivals include the GeForce GTX 1650 SUPER, which scores 1.4% higher on average. This proximity in raw scores does not translate to identical gaming performance, as the GTX 1070’s higher memory bandwidth gives it an edge in memory-intensive scenes. The measured FPS data shows that the GPU is the dominant component in this combo, as the CPU’s single-thread performance (3DMark single-thread score of 893) is more than sufficient to handle Fortnite’s game logic, allowing the GPU to dictate the overall frame rate.
How This Combo Ranks
This combo ranks 1322 out of 1564 tested combinations, placing it in the bottom 15.5% of all configurations. This low ranking is primarily due to the GPU’s age, as the CPU’s percentile ranking of 72 is significantly higher than the GPU’s 51. The i3-12100F’s average benchmark score of 13516 is nearly identical to its nearest rival, the AMD Ryzen Threadripper PRO 3975WX, which scores 13534, a negligible difference of 0.1%. This suggests that the CPU is not holding back the system, and its performance is competitive with much more expensive processors.
In contrast, the GTX 1070’s average benchmark score of 12331 is slightly below its nearest rival, the GeForce GTX 880M, which scores 12490, a 1.3% deficit. This indicates that the GPU is the weak link in the combo, and its performance is below the average of its peers. The combination’s rank is therefore a reflection of the GPU’s limitations, not the CPU’s capabilities. The data shows that this combo is best suited for 1080p gaming, where the CPU can feed the GPU adequately, and the GPU can deliver acceptable framerates on medium to high settings.
The rank also highlights that this is an older hardware pairing, and newer combos with more modern GPUs will likely outperform it. However, for Fortnite specifically, the game’s optimization for lower-end hardware means that this combo can still achieve a playable experience, particularly at 1080p. The data indicates that the CPU has significant headroom, as its multithreaded benchmark scores (e.g., Cinebench R23 multicore of 11912) are strong, but the GPU’s 8 GB memory and Pascal architecture limit the overall system potential.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the combo’s performance across all resolution and settings combinations.
At 1920x1080, the results are strong across the board. The Low preset achieves an average of 171 FPS, which is excellent for competitive play. The Medium preset delivers 118.9 FPS, still well above the 60 FPS threshold for smooth gameplay. The High preset drops to 92.1 FPS, which remains highly playable, and the Ultra preset maintains 59.5 FPS, which is just at the edge of comfortable gaming. This resolution is clearly where the combo excels, as the GPU is not overtaxed.
At 2560x1440, the performance degrades notably. Low settings yield 107 FPS, which is still playable, but the drop from 1080p is significant. Medium settings produce 74.8 FPS, which is acceptable, while High settings fall to 57.2 FPS, which is borderline. The Ultra preset drops to 40.8 FPS, which is below the ideal range for fast-paced action. The data shows that 1440p requires a trade-off between visual quality and framerate, with Low settings being the only preset that provides a consistently smooth experience.
At 3840x2160, the combo struggles. Low settings average 57.4 FPS, which is playable but not ideal. Medium settings drop to 39.1 FPS, which is noticeably choppy. High settings fall to 29.9 FPS, and Ultra settings plummet to 19.3 FPS, making both presets unplayable for any serious gaming. The data shows that 4K is not a viable option for this combo, regardless of settings, as even the lowest preset cannot maintain a stable 60 FPS.
Settings Recommendations
Based on the measured FPS data, the optimal experience for this combo is at 1920x1080 with the High preset, which delivers 92.1 FPS. This provides a good balance between visual fidelity and performance, ensuring smooth gameplay without the need to drop to lower settings. For players seeking maximum competitive advantage, the Low preset at 1080p offers 171 FPS, which is well above the refresh rate of most monitors and minimizes input lag.
At 1440p, the Medium preset is the best choice, as it delivers 74.8 FPS, which is playable and offers better visual quality than Low. However, users with 1440p monitors should be prepared to compromise on settings, as High and Ultra presets result in framerates below 60 FPS. The data suggests that this combo is not ideal for 1440p gaming, and users should prioritize 1080p for the best experience.
For 4K, the data clearly shows that no preset provides a satisfactory experience. The Low preset’s 57.4 FPS is the only playable option, but it sacrifices too much visual quality to be enjoyable. The recommendation is to avoid 4K with this combo and instead use 1080p or 1440p with lower settings. Ultimately, the measured FPS data indicates that this system is best suited for 1080p gaming, with the High preset being the sweet spot for most users.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce GTX 1070 in Fortnite
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 57.4 |
| 3840x2160 | Medium | 39.1 |
| 3840x2160 | High | 29.9 |
| 3840x2160 | Ultra | 19.3 |
| 2560x1440 | Low | 107.0 |
| 2560x1440 | Medium | 74.8 |
| 2560x1440 | High | 57.2 |
| 2560x1440 | Ultra | 40.8 |
| 1920x1080 | Low | 171.0 |
| 1920x1080 | Medium | 118.9 |
| 1920x1080 | High | 92.1 |
| 1920x1080 | Ultra | 59.5 |
Fortnite with GTX 1070 + Other CPUs
See how Fortnite performs with the same GPU but different processors.
Other Games with ii3-12100F + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.