To The Core
This combination delivers exceptional performance with an average of 300 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 125 | 156 | 180 | 212 |
| 1440p QHD | 219 | 272 | 314 | 371 |
| 1080p Full HD | 326 | 405 | 467 | 552 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 7 9800X3D + NVIDIA GeForce RTX 4080, In-Depth Analysis
The AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 4080 combination delivers exceptional frame rates in To The Core, an idle genre title that proves far more demanding than its category suggests. Across all tested resolutions and settings, this pairing never drops below 125 FPS average, with the 1080p Low preset reaching 552 FPS. The data indicates a system where the GPU is the primary scaling factor at higher resolutions, while the CPU’s strong single-thread and multi-thread performance keeps the pipeline fed even at extreme frame rates.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep but predictable, revealing a GPU-bound workload at higher pixel counts. At High settings, the average FPS falls from 405 at 1920x1080 to 272 at 2560x1440, then to 156 at 3840x2160. That is a 33% reduction from 1080p to 1440p, and a further 43% reduction from 1440p to 4K. The total scaling from 1080p High to 4K High is a 61% loss in average FPS, which is substantial but expected for a game that stresses pixel throughput more than geometry or physics.
Looking at the Low preset, the scaling pattern shifts. At 1920x1080 Low, the average is 552 FPS, dropping to 371 at 2560x1440 and 212 at 3840x2160. The percentage drops are 33% and 43% respectively, nearly identical to High settings. This consistency suggests that even at Low settings, the GPU remains the limiting factor at higher resolutions, with the RTX 4080’s 16 GB GDDR6X memory and 716.8 GB/s bandwidth being exercised fully. The fact that Low and High show similar relative scaling indicates that the game’s settings do not drastically alter the bottleneck profile; resolution is the dominant variable.
Medium settings show a similar trend, with 467 FPS at 1080p, 314 FPS at 1440p, and 180 FPS at 4K. The min FPS values for Medium are also recorded: 397 at 1080p, 267 at 1440p, and 153 at 4K. The max FPS at Medium reaches 537 at 1080p, 361 at 1440p, and 207 at 4K. These min/max ranges indicate that the frame pacing remains stable, with the gap between min and max FPS roughly proportional to resolution—about 140 FPS spread at 1080p, 94 at 1440p, and 54 at 4K. This tightening of the frame range at higher resolutions further confirms that the GPU’s workload becomes more uniform as pixel count rises, reducing CPU-induced variability.
Ultra settings produce the lowest averages: 326 FPS at 1080p, 219 at 1440p, and 125 at 4K. The scaling from 1080p to 1440p is 33%, and from 1440p to 4K is 43%, matching the other presets almost exactly. This uniformity across all four settings presets is a strong signal that To The Core scales almost purely with resolution, and the RTX 4080’s compute capabilities—48.74 TFLOPS FP32 and a boost clock of 2505 MHz—are the determining factor. The CPU, with its 8 cores and 16 threads, does not become a bottleneck even at 552 FPS, as evidenced by the fact that the 1080p Low result is not disproportionately higher relative to 1440p Low compared to other presets.
How This Combo Ranks
In the benchmark database, this CPU-GPU combination ranks 226th out of 3,725 tested combos for To The Core, placing it in the top 6% of all configurations. That rank reflects the raw performance of the RTX 4080, which sits at the 86th percentile among all GPUs, and the Ryzen 7 9800X3D, which sits at the 87th percentile among all CPUs. The combo rank of 226 is slightly lower than what those individual percentiles might suggest, implying that many higher-ranked combos pair even faster GPUs with this CPU or similar ones.
The CPU’s nearest rivals in average benchmark score illustrate its position. The AMD Ryzen 7 PRO 8840HS has an average score of 39,603, which is 0.4% lower than the 9800X3D’s 39,768. The AMD Ryzen AI 9 365 scores 40,048, which is 0.7% higher. The AMD Ryzen AI 7 450 scores 39,485, 0.7% lower. The AMD Ryzen 7 7700 scores 40,081, 0.8% higher. These deltas are all within 1%, meaning the 9800X3D is essentially tied with those processors in aggregate benchmark performance, despite being a dedicated desktop part with a 120 W TDP and a 4.70 GHz base clock. The 9800X3D’s advantage in gaming likely comes from its 96 MB shared L3 cache, which is not reflected in these synthetic averages.
For the GPU, the nearest rivals show a similar tight grouping. The RTX 4080 SUPER has an average score of 54,209, just 0.1% higher than the RTX 4080’s 54,247. The AMD Radeon Pro W5700X scores 54,828, which is 1.1% higher. The AMD Radeon RX 6750 GRE 12 GB scores 55,698, 2.6% higher, and the AMD Radeon 8060S scores 55,757, 2.7% higher. It is notable that the RTX 4080’s own successor-class card, the SUPER, is nearly identical in average score, meaning the performance difference in To The Core would likely be minimal. The fact that two AMD cards score higher in synthetic tests but the RTX 4080 still achieves 156 FPS at 4K Ultra in this game indicates that synthetic averages do not perfectly predict game-specific results.
GPU Role
The NVIDIA GeForce RTX 4080 is built on the Ada Lovelace architecture, using the AD103 chip fabricated on a 5 nm process at TSMC. It houses 45,900 million transistors on a 379 mm² die, with a transistor density of 121.1M per mm². The GPU’s base clock is 2205 MHz, boosting to 2505 MHz, and its memory runs at 1400 MHz, which translates to 22.4 Gbps effective. The 16 GB of GDDR6X memory on a 256-bit bus provides 716.8 GB/s of bandwidth, a figure that proves sufficient for To The Core even at 4K Ultra settings, where the average FPS remains at 125.
The RTX 4080’s compute resources are substantial: 9,728 shading units, 304 texture mapping units, and 112 raster output units. It also includes 76 RT cores and 304 tensor cores, though an idle game like To The Core likely does not heavily utilize ray tracing or DLSS. The pixel rate is 280.6 GPixel/s and the texture rate is 761.5 GTexel/s, both of which contribute to the high fill rates needed at 4K. The FP32 performance of 48.74 TFLOPS, with FP16 at the same 48.74 TFLOPS (1:1 ratio), indicates a balanced compute design that handles the game’s shader workload efficiently.
The benchmark data for the RTX 4080 shows a 3DMark Steel Nomad DX12 score of 6,567, a Geekbench OpenCL score of 214,739, and a Geekbench Vulkan score of 263,779. In Passmark tests, the DirectX 12 score is 132, DirectX 11 is 314, DirectX 10 is 204, and DirectX 9 is 370. The G3D score is 34,457, and the GPU compute score is 20,671. These numbers place the RTX 4080 at the 86th percentile among all GPUs, with an average benchmark score of 54,247. The G2D score of 1,239 is less relevant for 3D gaming but indicates solid 2D performance. The DirectX 12 score of 132 being lower than DirectX 11’s 314 is unusual but reflects the specific workload of those tests, not the game’s performance.
In To The Core, the GPU’s role is clearly dominant. At 4K Ultra, the average FPS of 125 is the lowest recorded, but still well above the 60 FPS threshold for smooth gameplay. The memory bandwidth of 716.8 GB/s appears adequate, as the 4K results do not show a disproportionate drop that would indicate a memory capacity or bandwidth stall. The 16 GB VRAM is more than enough for this title, which likely uses only a fraction of it even at Ultra settings. The boost clock of 2505 MHz is consistently utilized, as evidenced by the linear scaling of FPS with resolution changes.
Measured FPS Breakdown
At 1920x1080, the RTX 4080 delivers extraordinary frame rates. The Low preset averages 552 FPS, which is the highest recorded for this combo. Medium averages 467 FPS, with a min of 397 and a max of 537. High averages 405 FPS, and Ultra averages 326 FPS. The step from Low to Medium is a 15% reduction, from Medium to High is a 13% reduction, and from High to Ultra is a 20% reduction. This pattern indicates that each settings tier adds a meaningful but not overwhelming load, with Ultra being the most demanding.
At 2560x1440, the averages are 371 FPS for Low, 314 FPS for Medium (min 267, max 361), 272 FPS for High, and 219 FPS for Ultra. The percentage reductions between presets are 15% from Low to Medium, 13% from Medium to High, and 19% from High to Ultra, nearly identical to 1080p. This consistency suggests that the settings presets have a similar relative cost regardless of resolution, which is a sign of well-optimized rendering paths. The min FPS of 267 at Medium 1440p is still higher than the 4K Ultra average of 125, showing that the combo never struggles at this resolution.
At 3840x2160, the averages drop to 212 FPS for Low, 180 FPS for Medium (min 153, max 207), 156 FPS for High, and 125 FPS for Ultra. The reduction from Low to Medium is 15%, Medium to High is 13%, and High to Ultra is 20%, matching the other resolutions. The min FPS of 153 at Medium 4K is above 144 Hz, meaning that even the worst-case frame times at that setting are suitable for high-refresh-rate 4K displays. The Ultra preset at 125 FPS is the only setting that dips below 144 FPS, but it remains well above 100 FPS.
Comparing across resolutions, the Low preset at 4K (212 FPS) outperforms the Ultra preset at 1440p (219 FPS) by a small margin, indicating that resolution has a slightly larger impact than going from Low to Ultra at a given resolution. Specifically, dropping from 1440p Ultra to 4K Low yields a 3% FPS decrease, while staying at 1440p and moving from Low to Ultra yields a 41% decrease. This means that if a player prioritizes high frame rates, reducing settings is more effective than lowering resolution in To The Core.
Settings Recommendations
For 1080p displays, the Ultra preset is the clear choice. At 326 FPS average, it is more than sufficient for any 240 Hz or 360 Hz monitor, and the visual fidelity improvements over High are worth the 20% FPS cost. The Medium preset at 467 FPS is overkill for most displays, and Low at 552 FPS provides no practical benefit unless chasing esports-level responsiveness. The data shows that even at Ultra, the RTX 4080 has massive headroom at 1080p, so there is no reason to compromise.
For 1440p, the High preset at 272 FPS is the sweet spot. It delivers a 24% improvement over Ultra’s 219 FPS while likely offering most of the visual quality. The Medium preset at 314 FPS is also viable, but High provides a better balance for the 13% FPS difference. The Ultra preset at 219 FPS is still excellent, but the min FPS data is not recorded for Ultra, so High’s consistency is unverified. Given that the Medium preset shows a min of 267 FPS, High would likely have a min above 220 FPS, which is still above most 144 Hz monitors. For players with 144 Hz displays, even Ultra at 219 FPS is sufficient, but High gives extra breathing room.
For 4K, the recommendation depends on the display’s refresh rate. The Ultra preset at 125 FPS average is playable on 120 Hz panels, and the High preset at 156 FPS is ideal for 144 Hz displays. The Medium preset at 180 FPS (min 153) is the best choice for 165 Hz or higher refresh-rate 4K monitors, as it provides a comfortable margin above the refresh rate. The Low preset at 212 FPS is unnecessary unless the display supports 240 Hz at 4K, which is rare. Given that the min FPS for Medium at 4K is 153, this setting ensures no drops below 144 Hz, making it the most robust option for high-refresh 4K gaming.
The data suggests that the RTX 4080 is powerful enough to run To The Core at Ultra settings in 4K with 125 FPS, but the step to High adds 31 FPS (25% improvement) with likely minimal visual changes. For competitive play or high-refresh displays, High at 4K is the optimal choice. For casual play, Ultra is acceptable. The Medium preset’s min FPS of 153 is the only recorded min value at 4K, which provides confidence in frame pacing that the other settings lack.
CPU Role
The AMD Ryzen 7 9800X3D is a desktop processor from the 9000 series, based on the Zen 5 architecture and codenamed Granite Ridge. It has 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.20 GHz. The CPU’s TDP is 120 W, and it uses the AMD Socket AM5. It is fabricated on a 4 nm process at TSMC, with 8,315 million transistors on a 70.6 mm² die. The cache hierarchy includes 80 KB of L1 per core, 1 MB of L2 per core, and a large 96 MB shared L3 cache, which is characteristic of the X3D series and beneficial for gaming workloads.
In synthetic benchmarks, the 9800X3D delivers strong numbers. Cinebench R23 multicore scores 23,230, while single-core scores 2,080. Geekbench multicore scores 18,696, and single-core scores 2,964. Passmark multithread scores 40,009, and single-thread scores 4,430. The 3DMark tests show 10,081 for 16 threads, 2,394 for 2 threads, 4,669 for 4 threads, 8,252 for 8 threads, 10,067 for max threads, and 1,212 for single thread. These scores place the CPU at the 87th percentile among all CPUs, with an average benchmark score of 39,768. The nearest rivals are all within 1% in average score, as noted earlier.
For To The Core, the CPU’s role is to maintain high frame rates without bottlenecking the GPU. At 1080p Low, the 552 FPS average suggests that the CPU is capable of feeding the RTX 4080 with enough draw calls and game logic updates to sustain over 500 FPS. The 5.20 GHz boost clock and 96 MB L3 cache are likely the key factors, as idle games often have complex simulation logic that benefits from cache locality. The single-thread performance, as shown by the Cinebench R23 single-core score of 2,080, ensures that the main game thread does not become a limiting factor.
The 3DMark 2-thread score of 2,394 and 4-thread score of 4,669 indicate that the CPU scales well with moderate thread counts, which is typical for games that use a few primary threads. The 8-thread score of 8,252 is nearly double the 4-thread score, showing good multi-threading efficiency. The max-thread score of 10,067 is only slightly higher than the 16-thread score of 10,081, suggesting that the CPU is fully utilized at 16 threads. This is relevant because To The Core, despite being an idle game, may have background simulation threads that benefit from the 16 threads.
The fact that the combo rank is 226 out of 3,725, while the CPU’s percentile is 87, indicates that the CPU is not the limiting factor in most configurations. The bottleneck shifts to the GPU at higher resolutions, as evidenced by the consistent 33% and 43% scaling drops. At 1080p, the CPU’s performance allows the GPU to reach its full potential, with the 552 FPS Low result being proof of the 9800X3D’s ability to avoid holding back the RTX 4080. The 120 W TDP is modest for such performance, and the 4 nm process keeps power efficiency high, though power consumption is not a focus of this analysis.
The CPU’s memory support for DDR5 with dual-channel configuration and 89.6 GB/s bandwidth is adequate for the game’s data streaming needs. The PCIe Gen 5 interface with 24 lanes ensures fast communication with the GPU, though the RTX 4080 uses PCIe 4.0 x16, which is backward compatible. The integrated Radeon Graphics are present but irrelevant for gaming with a discrete GPU. Overall, the Ryzen 7 9800X3D provides the computational headroom needed to ensure that To The Core’s frame rates are limited only by the GPU, not the processor.
Hardware Specifications
AMD Ryzen 7 9800X3D
NVIDIA GeForce RTX 4080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9800X3D + NVIDIA GeForce RTX 4080 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 212.0 |
| 3840x2160 | Medium | 180.0 |
| 3840x2160 | High | 156.0 |
| 3840x2160 | Ultra | 125.0 |
| 2560x1440 | Low | 371.0 |
| 2560x1440 | Medium | 314.0 |
| 2560x1440 | High | 272.0 |
| 2560x1440 | Ultra | 219.0 |
| 1920x1080 | Low | 552.0 |
| 1920x1080 | Medium | 467.0 |
| 1920x1080 | High | 405.0 |
| 1920x1080 | Ultra | 326.0 |
To The Core with Ryzen 7 9800X3D + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 4080 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 7 9800X3D + RTX 4080
Explore FPS benchmarks for other games using this same hardware combination.