To The Core

To The Core

AVERAGE FPS
298
excellent

This combination delivers exceptional performance with an average of 298 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 125 155 179 211
1440p QHD 218 271 312 369
1080p Full HD 324 403 464 549

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 211
3840x2160 Medium 179
3840x2160 High 155
3840x2160 Ultra 125
2560x1440 Low 369
2560x1440 Medium 312
2560x1440 High 271
2560x1440 Ultra 218
1920x1080 Low 549
1920x1080 Medium 464
1920x1080 High 403
1920x1080 Ultra 324

To The Core with AMD Ryzen 7 9700F + NVIDIA GeForce RTX 4080 SUPER, In-Depth Analysis

Resolution Scaling

The measured frame rates for To The Core show a surprisingly shallow performance curve as resolution increases, which immediately signals that the GPU is not the dominant constraint at lower resolutions. At 1080p with Low settings, the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4080 SUPER combination produces an average of 549 FPS. Moving to 1440p drops that to 369 FPS, a reduction of 180 FPS. At 4K, the Low preset still holds an average of 211 FPS. While these are large absolute drops, the relative scaling reveals the bottleneck shifting. From 1080p to 1440p, the frame rate drops by roughly 33%, but from 1440p to 4K, the drop is about 43%. This increasing percentage loss as resolution climbs indicates that the workload is transitioning from a CPU-limited scenario at 1080p to a more balanced, GPU-influenced one at 4K.

The pattern is consistent across all settings presets. With the High preset, the system delivers 403 FPS at 1080p, 271 FPS at 1440p, and 155 FPS at 4K. The delta between 1080p and 1440p is 132 FPS, while the delta between 1440p and 4K is 116 FPS. This near-linear drop in absolute terms, despite the pixel count quadrupling from 1080p to 4K, is the key indicator. If the GPU were the sole limiting factor, the 4K score would be drastically lower relative to 1080p. The fact that 4K still achieves 155 FPS on High suggests that the processor is still feeding frames efficiently, even at the highest pixel counts, but the GPU is beginning to assert its influence.

The Ultra preset tells a similar story, but with a more pronounced GPU impact. At 1080p Ultra, the average is 324 FPS. At 1440p, it drops to 218 FPS, and at 4K, it falls to 125 FPS. The percentage drop from 1440p to 4K is approximately 43%, which is steeper than the 33% drop seen from 1080p to 1440p. This is the clearest evidence that the RTX 4080 SUPER's rendering capabilities are the limiting factor at 4K with maximum settings. The data suggests that for competitive play or high-refresh-rate monitors, 1080p and 1440p are where this combo shines, while 4K is best suited for visually demanding but less frame-rate-critical scenarios.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER is a high-end Ada Lovelace part with 16 GB of GDDR6X memory on a 256-bit bus, providing 736.3 GB/s of bandwidth. Its boost clock is rated at 2550 MHz, and it houses 10240 shading units. In To The Core, the GPU's role becomes increasingly critical as resolution and settings increase. The benchmark data shows that at 4K Ultra, the system averages 125 FPS, which is the lowest measured result. This is 30 FPS lower than the 4K High preset, indicating that the Ultra settings impose a significant load on the GPU's compute and memory subsystems.

The VRAM capacity appears more than sufficient for this title. Even at 4K Ultra, the 16 GB frame buffer is unlikely to be a constraint, as the game is an idle genre title with relatively simple geometry compared to AAA shooters. The memory bandwidth of 736.3 GB/s is also likely adequate, given that the frame rates remain high even at 4K. The difference between Low and Ultra at 4K is 86 FPS (211 vs 125), which demonstrates that the GPU is scaling with the increased shading and texture work required by higher presets.

The GPU's raw compute power, measured at 52.22 TFLOPS FP32, is a strong indicator of its ability to handle the pixel throughput required at 4K. However, the data shows that even with this power, the RTX 4080 SUPER is the primary limiter when pushing the highest settings at 4K. The PassMark G3D score of 34245 places it in the 86th percentile of all GPUs, and its average benchmark score of 54209 is nearly identical to the standard RTX 4080, which scores 54247 (a delta of -0.1%). This suggests that the SUPER variant offers minimal performance uplift over its predecessor in synthetic tests, and the game benchmarks reflect that parity, with the GPU being the deciding factor in the steepest resolution scaling scenarios.

FAQ

*Q: Is the RTX 4080 SUPER powerful enough to run To The Core at 4K with maximum settings?*

A: Yes, the data indicates it is playable. The measured average frame rate at 3840x2160 with the Ultra preset is 125 FPS, which is well above standard 60 Hz refresh rates, though it is the lowest score in the entire dataset.

Q: How does the RTX 4080 SUPER compare to its direct predecessor, the RTX 4080?

A: The benchmark results show they are effectively tied. The RTX 4080 SUPER has an average benchmark score of 54209, while the RTX 4080 scores 54247, resulting in a delta of -0.1%, meaning the SUPER is marginally slower in the aggregate metrics.

Q: Will the CPU bottleneck the GPU at 1080p?

A: The evidence suggests yes. At 1920x1080 with Low settings, the system reaches 549 FPS. This extremely high frame rate, combined with the fact that dropping to 1440p only reduces the frame rate to 369 FPS, indicates that the AMD Ryzen 7 9700F is the limiting component at the lower resolution.

Q: What is the performance difference between the Medium and High presets at 1440p?

A: At 2560x1440, the Medium preset averages 312 FPS, while the High preset averages 271 FPS. This is a 41 FPS difference, showing that the High preset imposes a moderate additional load on the system.

Q: Does the processor's multi-threaded performance impact the frame rates in this game?

A: Given that To The Core is an idle game, the impact is likely minimal. The CPU's PassMark multithread score is 36470, and its single-thread score is 4691. The high frame rates at 1080p suggest that single-thread performance is more relevant, but the sheer headroom of the CPU means it does not become a problem until frame rates exceed 500 FPS.

Q: How does the CPU stack up against its nearest rivals in the benchmark database?

A: The AMD Ryzen 7 9700F has an average benchmark score of 69996. It is 0.2% faster than the AMD Ryzen 9 7940HX (score 69875) and 0.7% faster than the AMD Ryzen 9 7950X (score 69515). Conversely, it is 0.2% slower than the Intel Core i7-14700KF (score 70163) and 0.9% slower than the Intel Core i7-14700K (score 69355).

Measured FPS Breakdown

The dataset provides a comprehensive look at performance across three resolutions and four settings presets. At 1920x1080, the system is clearly CPU-limited, as even the most demanding preset, Ultra, achieves an average of 324 FPS. The Low preset reaches 549 FPS, which is the highest score in the entire test suite. The Medium preset averages 464 FPS, with a minimum of 395 FPS and a maximum of 534 FPS. The High preset sits between Medium and Ultra, with an average of 403 FPS. The spread from Low to Ultra at 1080p is 225 FPS, indicating that the CPU has enough headroom to accommodate the increased GPU load without dropping below the 300 FPS mark.

Moving to 2560x1440, the frame rates remain exceptionally high but begin to show the GPU's influence. The Low preset drops to 369 FPS, which is a 180 FPS reduction from 1080p. The Medium preset averages 312 FPS (min 266, max 359), while High averages 271 FPS. The Ultra preset is the only one to dip below the 250 FPS threshold, with an average of 218 FPS. The performance scaling from 1080p to 1440p is consistent across all presets, showing a roughly 30-35% reduction in frame rate, which is less than the 56% increase in pixel count, reinforcing the CPU-bound nature of the lower resolution.

At 3840x2160, the GPU becomes the primary limiter, especially on higher settings. The Low preset still manages an impressive 211 FPS, but the Ultra preset falls to 125 FPS. The Medium preset averages 179 FPS (min 152, max 205), and High sits at 155 FPS. The gap between Low and Ultra at 4K is 86 FPS, which is the largest absolute difference between the lowest and highest presets across any resolution. This indicates that the Ultra preset's additional visual effects have a significant cost at 4K, whereas at 1080p, the same preset comparison yields a 225 FPS difference, because the CPU is the bottleneck, not the GPU. The data shows a clear hierarchy: 1080p is for maximum frame rates, 1440p is the sweet spot for high refresh rate gaming, and 4K is for maximum visual fidelity with still excellent performance.

CPU Role

The AMD Ryzen 7 9700F is built on the Zen 5 (Granite Ridge) architecture using a 4 nm process at TSMC. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The processor has 32 MB of shared L3 cache and supports DDR5 memory in a dual-channel configuration. In To The Core, the CPU's role is to feed the GPU with draw calls and game logic updates. The benchmark results show that at 1080p, the CPU is the limiting factor, as evidenced by the massive frame rates that exceed 500 FPS on the Low preset.

The CPU's single-thread performance, measured at 4691 in the PassMark single-thread test, is likely the most critical factor for this idle game, which may not utilize all 16 threads efficiently. The multithread score of 36470 and the integer math score of 120788 suggest that the processor has ample headroom for any background tasks or complex simulation logic the game might run. The fact that the 1080p Ultra preset still achieves 324 FPS indicates that even when the GPU is fully engaged, the 9700F does not become a bottleneck until frame rates approach the 500-550 FPS range.

Comparing the 9700F to its nearest rivals, it sits in a tight performance band. It is virtually tied with the AMD Ryzen 9 7940HX (delta of 0.2%) and the Intel Core i7-14700KF (delta of -0.2%). This means that in a CPU-limited scenario like 1080p Low in To The Core, swapping to any of these processors would yield nearly identical frame rates. The processor's 94th percentile ranking among all CPUs confirms its high-end status, but the game's data shows that for this specific title, the CPU is rarely the limiting factor outside of the lowest resolution and settings. The 65 W TDP and 5.50 GHz boost clock are key specifications, but the benchmark results are what matter: the 9700F provides enough processing power to ensure the RTX 4080 SUPER is utilized to its fullest potential at 1440p and above.

Settings Recommendations

Based on the measured FPS data, the optimal settings for To The Core depend heavily on the target resolution and refresh rate. For users with a 1080p 144Hz or 240Hz monitor, the High preset is the recommended choice. It delivers an average of 403 FPS, which is more than enough to saturate any high-refresh display, and it provides better visual quality than the Low or Medium presets. The Ultra preset, while visually superior, drops to 324 FPS, which is still excellent but represents a 79 FPS loss for marginal visual gains that may not be noticeable in an idle game.

At 1440p, the Medium preset offers the best balance of visual fidelity and performance. It averages 312 FPS, with a minimum of 266 FPS, ensuring smooth gameplay even in demanding scenes. The High preset at 271 FPS is also viable, but the 41 FPS difference between Medium and High is significant if the goal is to maintain a locked 300 FPS. The Ultra preset at 218 FPS is playable and looks great, but it is harder to recommend when the lower presets offer such high headroom.

For 4K gaming, the High preset is the sweet spot. It averages 155 FPS, which is well above the 120 Hz threshold for many high-end monitors. The Medium preset provides 179 FPS, but the drop to High is only 24 FPS, making High the better choice for the improved visuals. The Ultra preset at 125 FPS is the only setting that dips below 144 FPS, and while it is still smooth, the performance cost is steep. The Low preset at 211 FPS is unnecessary, as the visual sacrifice is too great for the frame rate gain. In summary, the data suggests that the High preset is the best all-rounder, providing over 150 FPS at 4K and over 400 FPS at 1080p, making it the recommended choice for most users.

Hardware Specifications

AMD Ryzen 7 9700F

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 5500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 4080 SUPER

VRAM 16 GB GDDR6X
Base Clock —
Boost Clock 2550 MHz MHz
TDP 320 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9700F + NVIDIA GeForce RTX 4080 SUPER in To The Core

Resolution Settings Avg FPS
3840x2160 Low 211.0
3840x2160 Medium 179.0
3840x2160 High 155.0
3840x2160 Ultra 125.0
2560x1440 Low 369.0
2560x1440 Medium 312.0
2560x1440 High 271.0
2560x1440 Ultra 218.0
1920x1080 Low 549.0
1920x1080 Medium 464.0
1920x1080 High 403.0
1920x1080 Ultra 324.0

To The Core with Ryzen 7 9700F + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 4080 SUPER + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 7 9700F + RTX 4080 SUPER

Explore FPS benchmarks for other games using this same hardware combination.