Archeage

The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4080 SUPER combination delivers a wide performance envelope in ArcheAge, with average frame rates ranging from a demanding 43 FPS at 4K Ultra to a fluid 268 FPS at 1080p Low. The benchmark data suggests that the Ultra preset is disproportionately punishing, while the Medium and High presets offer the most balanced experience across resolutions.

Settings Recommendations

The measured data indicates that the Ultra preset creates a significant performance bottleneck, with average frame rates dropping to 43 FPS at 4K, 74 FPS at 1440p, and 111 FPS at 1080p. These figures fall below the threshold for high-refresh-rate gaming, particularly at 4K where the 43 FPS average would be noticeable in fast-paced combat scenarios. The performance cost of transitioning from High to Ultra is substantial, yet the visual return in a 2014 MMORPG is often marginal.

The Medium preset emerges as the most compelling choice for this hardware combination. At 4K, the Medium setting delivers 92 FPS with a minimum of 78 FPS and a maximum of 106 FPS, providing a smooth experience that stays above 60 FPS even in demanding moments. At 1440p, Medium achieves 161 FPS with minimums at 136 FPS, comfortably supporting high-refresh-rate displays. The 1080p Medium result of 238 FPS (minimum 203 FPS) is exceptionally high, ensuring no perceptible stutter even in crowded player hubs.

For users prioritizing maximum visual fidelity, the High preset remains viable, offering 62 FPS at 4K, 109 FPS at 1440p, and 162 FPS at 1080p. These numbers show that High is playable at 4K with adaptive sync, though the Medium preset provides a more consistent experience. The Low preset is primarily useful for competitive play, delivering 103 FPS at 4K, 180 FPS at 1440p, and 268 FPS at 1080p, but the visual compromise is severe for a game that relies on environmental storytelling.

The data implies that the Ultra preset was not optimized for modern hardware scaling, as the jump from Medium to Ultra cuts frame rates by more than half at every resolution. This suggests a potential inefficiency in the game's rendering pipeline for the highest settings, rather than a hardware limitation. Given the measured results, the Medium preset offers the best balance of visual quality and performance, with the High preset serving as a viable alternative for those with 60 Hz 4K displays.

How This Combo Ranks

The combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 4080 SUPER achieves a combo rank of 171 out of 2761 tested combinations in ArcheAge. This places the system in the top 6.2% of all tested configurations, indicating that the pairing is exceptionally well-suited for this title. The rank reflects the cumulative performance of both components, and the data shows that the system is capable of handling the game's most demanding scenarios.

The 171st position out of 2761 combos suggests that while this is a high-end configuration, there are still 170 tested combinations that outperform it in ArcheAge. These superior combinations likely feature newer or more powerful GPUs, as the RTX 4080 SUPER's nearest rivals show only marginal differences in synthetic benchmarks. The GPU's average benchmark score of 54209 places it just 0.1% behind the standard RTX 4080, 1.1% behind the Radeon Pro W5700X, and 2.7% behind the Radeon RX 6750 GRE 12 GB.

The CPU's benchmark performance contributes significantly to this ranking. With an average benchmark score of 69996, the Ryzen 7 9700F sits in the 94th percentile of all CPUs, demonstrating exceptional processing power. Its nearest rivals include the AMD Ryzen 9 7940HX (0.2% higher score), Intel Core i7-14700KF (0.2% lower score), AMD Ryzen 9 7950X (0.7% higher score), and Intel Core i7-14700K (0.9% higher score). These tight margins indicate that the CPU is not a limiting factor in the system's overall performance.

The combination rank of 171 suggests that ArcheAge responds well to both strong single-thread and multi-thread performance. The game's MMORPG nature often involves large player counts and complex world states, which benefit from the CPU's robust benchmark results. The data shows that the system outperforms the vast majority of tested configurations, making it a top-tier choice for players seeking high frame rates in this specific title.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER is built on the Ada Lovelace architecture with a 5 nm process, featuring 16 GB of GDDR6X memory on a 256-bit bus. The memory operates at 1438 MHz with 23 Gbps effective speed, providing a bandwidth of 736.3 GB/s. These specifications directly influence the GPU's ability to handle ArcheAge's texture-heavy environments and large draw distances.

The GPU's clock speeds of 2295 MHz base and 2550 MHz boost, combined with 10240 shading units, deliver substantial raw compute power. The benchmark results show a passmark G3D score of 34245 and a passmark GPU compute score of 19822, indicating strong performance in both rasterization and compute workloads. The GPU's percentile rank of 86 means it outperforms 86% of all GPUs in the benchmark database.

In ArcheAge, the GPU's 16 GB VRAM capacity is more than sufficient for the game's requirements, even at 4K Ultra settings. The measured frame rates show that the GPU is not VRAM-limited, as the performance drop from Medium to Ultra is consistent across resolutions. The GPU's role becomes more pronounced at higher resolutions, where the rendering load increases significantly. The transition from 1080p to 4K at High settings shows a frame rate drop from 162 to 62 FPS, indicating that the GPU is the primary bottleneck at 4K.

The RTX 4080 SUPER's 80 RT cores and 320 tensor cores provide additional capabilities, though ArcheAge does not appear to utilize ray tracing based on the measured data. The GPU's FP32 performance of 52.22 TFLOPS suggests ample headroom for the game's particle effects and spell animations. The benchmark data indicates that the GPU performs exceptionally well in this title, with the measured frame rates showing consistent scaling across settings.

Measured FPS Breakdown

At 3840x2160, the RTX 4080 SUPER and Ryzen 7 9700F combination produces an average of 62 FPS on High settings. The Medium preset improves this to 92 FPS with a minimum of 78 FPS and a maximum of 106 FPS, while the Low preset achieves 103 FPS. The Ultra preset drops significantly to 43 FPS, showing a 49 FPS difference between Medium and Ultra.

The 2560x1440 resolution presents a more favorable picture. High settings deliver 109 FPS, Medium reaches 161 FPS with minimums at 136 FPS and maximums at 185 FPS, and Low achieves 180 FPS. The Ultra preset manages 74 FPS, which is playable but below the refresh rate of most gaming monitors. The data shows a clear hierarchy at 1440p, with Medium providing the best balance of smoothness and visual quality.

At 1920x1080, the system demonstrates its full potential. High settings achieve 162 FPS, Medium hits 238 FPS with minimums at 203 FPS and maximums at 274 FPS, and Low reaches 268 FPS. The Ultra preset produces 111 FPS, which is still smooth but represents a significant drop from Medium. The 1080p Medium result of 238 FPS is particularly impressive, showing that the system can handle high refresh rate gaming at this resolution with comfortable margins.

The minimum FPS data for Medium settings provides insight into frame time consistency. At 4K, the minimum of 78 FPS against an average of 92 FPS represents a 15% deviation, while at 1440p the minimum of 136 FPS against 161 FPS shows a similar pattern. The 1080p minimum of 203 FPS against 238 FPS indicates better consistency at lower resolutions, likely due to reduced GPU load.

FAQ

Q: What is the best resolution for this combination in ArcheAge?

A: The data shows that 1440p Medium provides the best experience, with 161 FPS average and 136 FPS minimum. This resolution offers a balance between visual fidelity and performance, avoiding the significant frame rate drops seen at 4K.

Q: How does the Ultra preset compare to High in terms of performance?

A: The Ultra preset is dramatically more demanding, with average frame rates dropping from 62 FPS to 43 FPS at 4K, from 109 FPS to 74 FPS at 1440p, and from 162 FPS to 111 FPS at 1080p when compared to High. This represents a 33-37% performance reduction across resolutions.

Q: Is the Ryzen 7 9700F a bottleneck for the RTX 4080 SUPER in this game?

A: The CPU's benchmark scores suggest it is not a limiting factor. Its average score of 69996 places it in the 94th percentile, with nearest rivals showing less than 1% difference. The measured frame rates indicate that the GPU becomes the limiting factor at higher resolutions.

Q: What frame rates can be expected at 4K with Medium settings?

A: The measured data shows an average of 92 FPS with a minimum of 78 FPS and a maximum of 106 FPS. This provides a smooth experience for 4K gaming, though not sufficient for 120 Hz displays.

Q: How does this combination rank among all tested systems in ArcheAge?

A: The combination ranks 171st out of 2761 tested combinations, placing it in the top 6.2% of all configurations. This indicates excellent performance for this specific game.

Q: Does the GPU's 16 GB VRAM cause any limitations in ArcheAge?

A: The measured data shows no evidence of VRAM limitations. The frame rate scaling from Medium to Ultra is consistent across resolutions, and the GPU's 736.3 GB/s bandwidth appears sufficient for the game's requirements.

CPU Role

The AMD Ryzen 7 9700F features 8 cores and 16 threads based on the Zen 5 architecture, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The CPU operates on the AM5 socket with a 65 W TDP, making it an efficient choice for gaming. The benchmark results show a passmark single-thread score of 4691 and a passmark multithread score of 36470, indicating strong performance in both single and multi-threaded workloads.

In ArcheAge, the CPU's role is particularly important due to the game's MMORPG nature. Large player gatherings, complex world states, and network processing all contribute to CPU load. The Ryzen 7 9700F's 32 MB of L3 cache and DDR5 memory support with 89.6 GB/s bandwidth provide ample resources for these tasks. The CPU's passmark physics score of 2122 and floating point math score of 77955 suggest it can handle the game's physics calculations efficiently.

The CPU's performance relative to its nearest rivals shows it is competitive with high-end desktop processors. The Ryzen 9 7940HX scores 0.2% higher, while the Intel Core i7-14700KF scores 0.2% lower. The Ryzen 9 7950X and Intel Core i7-14700K are 0.7% and 0.9% higher respectively. These small margins indicate that the CPU's performance is well-balanced for gaming applications.

The measured frame rates show that the CPU is not a bottleneck at lower resolutions. The 1080p results of 268 FPS on Low settings demonstrate that the CPU can feed the GPU effectively, even at very high frame rates. As resolution increases to 1440p and 4K, the GPU becomes the limiting factor, allowing the CPU to maintain consistent performance without becoming a constraint.

Resolution Scaling

The measured data reveals distinct scaling patterns across resolutions. At High settings, the average frame rate drops from 162 FPS at 1080p to 109 FPS at 1440p, a reduction of 53 FPS or 33%. The further drop to 62 FPS at 4K represents a 47 FPS reduction from 1440p, or 43%. This progressive scaling indicates that the GPU is becoming increasingly burdened as pixel count grows.

The Medium settings show a similar pattern but with different magnitude. From 238 FPS at 1080p to 161 FPS at 1440p, the drop is 77 FPS or 32%. The transition to 4K results in 92 FPS, a decrease of 69 FPS from 1440p, or 43%. These consistent percentages suggest that the performance scaling is primarily driven by the GPU's rendering capabilities rather than CPU limitations.

The Low settings display the most aggressive scaling. The 1080p result of 268 FPS drops to 180 FPS at 1440p, a 33% reduction, and further to 103 FPS at 4K, a 43% decrease. The Ultra settings follow the same pattern, with 111 FPS at 1080p dropping to 74 FPS at 1440p (33% reduction) and 43 FPS at 4K (42% decrease). This consistency across all settings strongly indicates that the GPU is the primary limiting factor at higher resolutions.

The scaling pattern reveals that the system is CPU-bound at 1080p, as evidenced by the high frame rates and the relatively modest differences between settings. As resolution increases, the GPU becomes the bottleneck, with the frame rate differences between settings becoming more pronounced. The data suggests that for 4K gaming, the Medium preset is the optimal choice, while 1080p users can comfortably use High or even Ultra settings without significant performance penalties.