To The Core

To The Core

AVERAGE FPS
132
excellent

This combination delivers exceptional performance with an average of 132 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 56 71 80 92
1440p QHD 95 118 138 161
1080p Full HD 140 180 205 244

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 92
3840x2160 Medium 80
3840x2160 High 71
3840x2160 Ultra 56
2560x1440 Low 161
2560x1440 Medium 138
2560x1440 High 118
2560x1440 Ultra 95
1920x1080 Low 244
1920x1080 Medium 205
1920x1080 High 180
1920x1080 Ultra 140

To The Core with AMD Ryzen 7 5800X + NVIDIA GeForce RTX 2060, In-Depth Analysis

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 2060 delivers a robust experience in To The Core, with the data showing that the combination is well-suited for high-refresh-rate gaming at 1080p and 1440p, while 4K remains playable but requires careful settings management. As an idle game, the title exhibits unusual scaling behavior across resolutions and presets, revealing distinct bottlenecks that shift depending on the workload.

Resolution Scaling

The measured frame rates demonstrate a clear and consistent drop as resolution increases from 1920x1080 to 3840x2160. At the High preset, the average frame rate falls from 179.9 FPS at 1080p to 118.2 FPS at 1440p, a reduction of approximately 34%. Moving further to 4K, the average drops to 71 FPS, representing a 40% decline from the 1440p figure and a 60% decline from the 1080p baseline. This pattern indicates that the rendering load scales heavily with pixel count, which is expected for a GPU-bound scenario at higher resolutions.

However, the scaling behavior is not uniform across all presets. At the Low preset, the transition from 1080p to 1440p yields a drop from 243.6 FPS to 160.9 FPS, a 34% reduction, while the move to 4K brings the average down to 91.7 FPS, another 43% decrease. The Medium preset follows a similar trajectory, with 204.8 FPS at 1080p, 138.2 FPS at 1440p, and 79.8 FPS at 4K. The Ultra preset shows the steepest relative decline, with 139.5 FPS at 1080p falling to 94.9 FPS at 1440p (a 32% drop) and then to 55.5 FPS at 4K (a 41% drop from 1440p).

The data suggests that at 1080p, the system is not entirely GPU-limited, as the frame rates are exceptionally high across all presets. The gap between Low and Ultra at 1080p is 104.1 FPS, indicating that the CPU and memory subsystem can feed the GPU sufficiently even at lower graphical loads. As resolution increases, the GPU becomes the dominant limiting factor, evidenced by the narrowing absolute differences between presets; at 4K, the spread between Low and Ultra is only 36.2 FPS, compared to 104.1 FPS at 1080p. This compression of performance at higher resolutions points to the RTX 2060’s rendering capacity as the primary constraint, rather than the Ryzen 7 5800X’s processing power.

GPU Role

The NVIDIA GeForce RTX 2060, built on the Turing architecture with a 12 nm process node, is the central component driving these results. Its 6 GB of GDDR6 memory on a 192-bit bus provides a bandwidth of 336.0 GB/s, which proves sufficient for the demands of To The Core at the tested resolutions. The GPU’s base clock of 1365 MHz and boost clock of 1680 MHz, combined with 1920 shading units, deliver a peak FP32 performance of 6.451 TFLOPS. These specifications correlate with the observed frame rates, particularly at 4K where the GPU’s raw throughput becomes the limiting factor.

The RTX 2060’s performance relative to its peers is modest, sitting at the 58th percentile among all GPUs. Its average benchmark score of 16074 places it just 0.5% ahead of the AMD Radeon RX 7600S and 1.8% ahead of the AMD Radeon Pro W5500, while trailing the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7%. In the context of To The Core, this mid-range positioning explains why 4K Ultra settings produce an average of 55.5 FPS, which is playable but not comfortably above the 60 FPS threshold. The 6 GB VRAM capacity is not shown to be a bottleneck in the measured data, as even at 4K Ultra, the frame rates remain consistent without evidence of memory-related stuttering or drops.

The GPU’s role becomes more apparent when examining the scaling from High to Ultra at each resolution. At 1080p, the drop from High (179.9 FPS) to Ultra (139.5 FPS) is 40.4 FPS, while at 1440p, the drop is 23.3 FPS (from 118.2 to 94.9), and at 4K, the drop is 15.5 FPS (from 71 to 55.5). This diminishing impact of preset changes at higher resolutions confirms that the GPU is nearing its computational ceiling at 4K, where the additional graphical features of Ultra settings cannot be fully offset by the CPU’s capabilities.

CPU Role

The AMD Ryzen 7 5800X, based on the Zen 3 architecture (codenamed Vermeer) and manufactured on a 7 nm process, provides substantial processing headroom for this title. With 8 cores and 16 threads, base clock of 3.80 GHz, and boost clock of 4.70 GHz, the CPU demonstrates strong multi-threaded performance. Its benchmark scores, including a Cinebench R23 multicore score of 23571 and a Geekbench multicore score of 10220, position it in the 84th percentile among all CPUs, indicating that it is far more capable than what To The Core requires.

The CPU’s dominance is evident in the 1080p results, where frame rates exceed 200 FPS at Low and Medium presets. At 243.6 FPS on Low settings, the system is likely approaching the limits of what the game engine can deliver, suggesting that the CPU is not the bottleneck in this scenario. The Ryzen 7 5800X’s nearest rival, the AMD Ryzen 7 5800, scores only 0.3% lower on average, while the Intel Core i5-12600KF trails by 0.8%, confirming that this CPU is well-matched for high-refresh-rate gaming.

However, the CPU’s role diminishes as resolution increases. The data shows that at 4K, even the Low preset (91.7 FPS) cannot match the 1080p Ultra performance (139.5 FPS), indicating that the GPU’s pixel-pushing capabilities are the limiting factor. The Ryzen 7 5800X’s 32 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are more than adequate for the game’s demands, as evidenced by the consistent frame pacing across all tested configurations. The CPU’s single-thread performance, with a Cinebench R23 single-core score of 3327, further supports its ability to handle the game’s logic without introducing frame time inconsistencies.

Settings Recommendations

Based on the measured frame rates, the optimal balance between visual quality and performance is achieved at the High preset for resolutions up to 1440p. At 1920x1080, High delivers 179.9 FPS, which is 40.4 FPS lower than Ultra but still far above the refresh rates of most monitors. For 2560x1440, High provides 118.2 FPS, a comfortable margin above 60 FPS, while Ultra drops to 94.9 FPS, which is still playable but offers diminishing returns for the additional graphical load.

For 4K, the Medium preset emerges as the recommended choice, with an average of 79.8 FPS. This is 8.8 FPS higher than High (71 FPS) and 24.3 FPS higher than Ultra (55.5 FPS), while still maintaining a significant visual improvement over Low (91.7 FPS). The trade-off between Medium and High at 4K is minimal in terms of frame rate, but Medium offers a better safety margin for maintaining stable performance. Players targeting a strict 60 FPS experience at 4K should select High, which averages 71 FPS, though those seeking the highest visual fidelity may accept the 55.5 FPS of Ultra.

The data indicates that Low settings are unnecessary for this hardware combination. Even at 4K, Low yields 91.7 FPS, which is only 11.9 FPS higher than Medium, making the visual sacrifice unjustified. The Ultra preset is only recommended for 1080p gaming, where its 139.5 FPS average remains well above the 60 FPS threshold and provides the best visual experience without compromising smoothness.

FAQ

*Q: What is the best resolution for this CPU/GPU combo in To The Core?*

A: The data shows that 1080p delivers the highest frame rates across all presets, with 179.9 FPS at High and 243.6 FPS at Low. For a balance of visual quality and performance, 1440p at High (118.2 FPS) is the most sensible choice, as 4K requires settling for Medium settings to stay above 80 FPS.

*Q: Can this system handle 4K gaming in To The Core?*

A: Yes, but with limitations. At 4K, the average frame rates range from 91.7 FPS on Low to 55.5 FPS on Ultra. The recommended Medium preset provides 79.8 FPS, which is playable, while High delivers 71 FPS. Only Ultra falls below the 60 FPS threshold.

Q: How does the RTX 2060 compare to its closest rivals in this game?

A: The RTX 2060’s average benchmark score of 16074 is 0.5% higher than the AMD Radeon RX 7600S and 1.8% higher than the AMD Radeon Pro W5500. It trails the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7%. These small deltas suggest that performance differences in To The Core would be negligible among these GPUs.

Q: Is the Ryzen 7 5800X a bottleneck for the RTX 2060?

A: The data suggests no. At 1080p, frame rates reach 243.6 FPS on Low settings, indicating that the CPU can feed the GPU well beyond typical display refresh rates. The CPU’s 84th percentile ranking and high multicore scores (23571 in Cinebench R23) further confirm that it is not a limiting factor in this game.

Q: What is the performance difference between Low and Ultra settings at each resolution?

A: At 1080p, the difference is 104.1 FPS (243.6 vs 139.5). At 1440p, the difference narrows to 66 FPS (160.9 vs 94.9). At 4K, the difference is 36.2 FPS (91.7 vs 55.5). This shrinking gap indicates that the GPU becomes the bottleneck as resolution increases.

Q: Should I use Medium or High settings for 4K gameplay?

A: The measured data shows Medium averaging 79.8 FPS and High averaging 71 FPS at 4K. Medium offers a 12.4% higher frame rate with a modest visual compromise, making it the better choice for maintaining smooth gameplay. High is acceptable if you prioritize visuals and can tolerate frame rates near 70 FPS.

Hardware Specifications

AMD Ryzen 7 5800X

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4700 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1680 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X + NVIDIA GeForce RTX 2060 in To The Core

Resolution Settings Avg FPS
3840x2160 Low 91.7
3840x2160 Medium 79.8
3840x2160 High 71.0
3840x2160 Ultra 55.5
2560x1440 Low 160.9
2560x1440 Medium 138.2
2560x1440 High 118.2
2560x1440 Ultra 94.9
1920x1080 Low 243.6
1920x1080 Medium 204.8
1920x1080 High 179.9
1920x1080 Ultra 139.5

To The Core with Ryzen 7 5800X + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 2060 + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X + RTX 2060

Explore FPS benchmarks for other games using this same hardware combination.