To The Core

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 4070 delivers exceptional frame rates in To The Core, an Idle genre title that proves far more demanding on resolution scaling than on raw compute. The measured data shows this combination never drops below 100 FPS even at 4K Ultra, positioning it as a high-end performer for this specific game. With a combo rank of 420 out of 1756 tested configurations, this pairing sits comfortably in the top quarter of all systems tested, offering a smooth experience across all resolution and settings combinations.

Resolution Scaling

The transition from 1080p to 4K reveals a clear pattern of GPU-bound scaling as resolution increases. At 1080p Low, the system produces 434 FPS, but this drops to 292.4 FPS at 1440p Low, and further to 167.7 FPS at 4K Low. This represents a 61.4% reduction in frame rate from 1080p to 4K at Low settings, indicating that the RTX 4070 becomes the limiting factor as pixel count rises.

The scaling behavior shifts with quality presets. At Ultra settings, the frame rate drops from 257.5 FPS at 1080p to 173.1 FPS at 1440p, then to 100.2 FPS at 4K. The percentage drop from 1440p to 4K at Ultra is 42.1%, compared to a 42.6% drop at Low settings across the same resolution span. This consistency suggests that the game's rendering load scales uniformly with resolution regardless of quality level, pointing to the GPU's memory bandwidth and shading capabilities as the primary constraint.

Interestingly, the gap between Low and Ultra settings narrows as resolution increases. At 1080p, Ultra produces 59.3% of the Low setting's frame rate, while at 4K, Ultra achieves 59.8% of Low. This suggests that at higher resolutions, the pixel throughput becomes the dominant factor, while at lower resolutions, the CPU's ability to feed the GPU becomes more relevant. The Ryzen 5 7600's single-thread performance, evidenced by its 3DMark single-thread score of 999 and Cinebench R23 single-core score of 3246, appears sufficient to keep up with the RTX 4070 at 1080p, where the GPU is less burdened.

FAQ

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 214.1 FPS, which provides a very smooth experience well above typical high-refresh-rate monitor capabilities.

Q: How does the RTX 4070's VRAM capacity affect performance in this game?

A: The GPU comes equipped with 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. At 4K Ultra, the system still manages 100.2 FPS, suggesting the VRAM allocation is sufficient for this title's demands.

Q: Is the Ryzen 5 7600 a bottleneck at lower resolutions?

A: The data shows diminishing returns on frame rate as resolution drops. At 1080p Low, the system reaches 434 FPS, but the 3DMark 2-thread score of 1938 and 4-thread score of 3686 indicate the CPU can handle the game's threading requirements without becoming a significant limiting factor.

Q: What is the performance difference between Medium and High settings at 4K?

A: At 3840x2160, Medium settings produce 139.1 FPS while High settings produce 120.9 FPS, a difference of 15.1% in favor of Medium. This allows users to prioritize visual fidelity or frame rate based on their preference.

Q: How does this combo rank compared to other tested systems?

A: The combination ranks 420th out of 1756 tested combos, placing it in the top 23.9% of all configurations tested. This is a strong position, particularly for an idle game where high frame rates are not always necessary.

Q: Can this system handle 4K gaming comfortably?

A: Yes, even at the most demanding preset (4K Ultra), the system maintains an average of 100.2 FPS. At 4K High, it reaches 120.9 FPS, providing excellent performance for high-resolution displays.

GPU Role

The NVIDIA GeForce RTX 4070 plays a pivotal role in To The Core's performance envelope, particularly at higher resolutions. The GPU's Ada Lovelace architecture, built on a 5 nm process at TSMC, contains 35,800 million transistors across a 294 mm² die. With 5888 shading units, 184 texture mapping units, and 64 raster output pipelines, the card delivers substantial raw compute power, evidenced by its FP32 rating of 29.15 TFLOPS.

Memory configuration is critical for this game. The 12 GB GDDR6X frame buffer operates at 1313 MHz (21 Gbps effective) across a 192-bit bus, yielding 504.2 GB/s of bandwidth. This proves sufficient for 4K Ultra settings, where the system still produces triple-digit frame rates. The pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s provide the throughput needed to maintain high fill rates at demanding resolutions.

Clock speeds also contribute to the observed performance. The base clock of 1920 MHz boosts to 2475 MHz, allowing the GPU to dynamically adjust its frequency based on workload demands. In To The Core, the scaling from 1080p to 4K suggests the GPU's compute and memory subsystems are fully utilized at higher resolutions, while at lower resolutions, the frame rate ceiling may be influenced by CPU-side processing. The GPU's PassMark G3D score of 26927 and 3DMark Steel Nomad DX12 score of 3854 confirm its strong standing, though its nearest rivals show close competition: the AMD Radeon RX Vega 56 trails by 0.6% while the NVIDIA GeForce MX570 A leads by 1.9% in average benchmark scores.

How This Combo Ranks

The AMD Ryzen 5 7600 + NVIDIA GeForce RTX 4070 combination holds the 420th position out of 1756 tested configurations in To The Core, placing it in the upper 24% of all systems. This rank reflects a balanced pairing where neither component severely bottlenecks the other across the tested resolution and settings matrix.

In the context of the CPU's overall standing, the Ryzen 5 7600 achieves an 83rd percentile rank against all CPUs, with an average benchmark score of 26617. Its nearest rivals include the AMD Ryzen 7 5800X3D (0.2% higher), Intel Core i9-12900HK (0.2% lower), AMD EPYC 8024P (0.2% higher), and Intel Core i9-11900K (0.3% higher). These minute differences suggest the CPU is well-matched with its competition, providing consistent performance without being a standout or weak link.

On the GPU side, the RTX 4070 sits at the 81st percentile against all GPUs, with an average benchmark score of 37283. Its nearest rivals show a wider spread: the AMD Radeon RX Vega 56 trails by 0.6%, the NVIDIA GeForce MX570 A leads by 1.9%, and the NVIDIA GeForce RTX 4080 Mobile leads by 2.2%, while the AMD Radeon RX 5300M trails by 2.5%. The GPU's strong performance in synthetic benchmarks translates well to real-world gaming, as the measured FPS data demonstrates.

The combination's rank of 420 indicates that while many systems outperform it, the vast majority of tested configurations (1336 combos) rank below this pairing. For an idle game, where frame rates above 60 FPS are typically more than adequate, this system provides substantial headroom, making it a robust choice for users who also play more demanding titles.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce an average of 434 FPS, Medium settings achieve 366.4 FPS, High settings reach 313.9 FPS, and Ultra settings maintain 257.5 FPS. The scaling from Low to Ultra at 1080p shows a 40.7% reduction in frame rate, reflecting the increased graphical workload of higher quality presets.

Moving to 2560x1440, the frame rates remain impressively high. Low settings average 292.4 FPS, Medium settings hit 245.9 FPS, High settings sustain 214.1 FPS, and Ultra settings hold 173.1 FPS. Compared to 1080p, the resolution increase to 1440p results in a 32.6% drop at Low settings and a 32.8% drop at Ultra settings, showing consistent scaling behavior.

At 3840x2160, the system still performs admirably. Low settings average 167.7 FPS, Medium settings reach 139.1 FPS, High settings achieve 120.9 FPS, and Ultra settings maintain 100.2 FPS. The drop from 1440p to 4K is more pronounced, with a 42.6% reduction at Low settings and a 42.1% reduction at Ultra settings, indicating that the GPU's memory bandwidth and pixel throughput become the limiting factors at this resolution.

Across all resolutions, the delta between Low and Medium settings remains relatively consistent, while the jump from High to Ultra produces the largest performance penalty. At 1080p, the difference between High and Ultra is 56.4 FPS, while at 4K, this same gap narrows to 20.7 FPS. This pattern suggests that the Ultra preset imposes additional rendering overhead that scales with resolution, making it the most demanding configuration for this hardware combination.