To The Core

The AMD Ryzen 5 7400F paired with the Intel Arc B570 lands near the bottom of the pack in To The Core, ranking 2380 out of 2991 tested combos. This places the combo in the 21st percentile of all configurations, indicating that while it can run the game, it is outpaced by the majority of systems in the database. The ranking reflects a pairing that is more balanced toward CPU performance than GPU muscle, which is a notable dynamic for a title that shows clear scaling with graphical settings.

The data suggests this is not a top-tier combination for To The Core, but it is far from a poor one. The rank is likely dragged down by the GPU’s mid-tier standing rather than the CPU, as the processor’s own percentile rank of 83 among all CPUs is substantially higher. This discrepancy between component and combo rankings hints that the graphics card is the primary limiter in this specific game, a hypothesis supported by the resolution scaling patterns discussed later.

How This Combo Ranks

The combo’s rank of 2380 out of 2991 places it in the bottom 20% of all tested configurations for To The Core. This is a clear signal that enthusiasts chasing maximum frame rates will need to look elsewhere, but it also means the setup is far from unplayable. The rank is determined by the measured FPS across all settings and resolutions, and the data shows this combo’s strength lies in its consistency rather than its peak performance.

At 1080p, the combo delivers playable frame rates across all presets, with the Low setting hitting 225 FPS and even Ultra maintaining 133 FPS. These numbers are respectable for a mid-range pairing, especially considering the GPU’s 65th percentile ranking among all graphics cards. The CPU, by contrast, sits in the 83rd percentile, suggesting the processor has headroom to spare while the GPU works harder to keep up.

The ranking becomes more concerning at higher resolutions. At 4K Ultra, the combo drops to 51 FPS, which is below the 60 FPS threshold many players consider the minimum for smooth gameplay. This performance cliff is typical of a GPU-bound scenario, and it confirms that the Arc B570 is the bottleneck in this pairing. The CPU’s high benchmark scores, such as a Cinebench R23 multi-core result of 21765, do little to help when the graphics card cannot push enough pixels.

Compared to other combos in the database, this pairing sits alongside systems with similar GPU performance. The Arc B570’s nearest rivals include the Intel Arc A750 and the NVIDIA GeForce RTX 3070 Mobile, with the B570 scoring 0.1% higher than the A750 and 0.1% lower than the RTX 3070 Mobile in average GPU benchmarks. This places the B570 in a tight cluster of mid-range cards, and the combo’s overall rank reflects that positioning.

GPU Role

The Intel Arc B570 is built on the Xe2-HPG architecture and features 10 GB of GDDR6 memory on a 160-bit bus, delivering 380.0 GB/s of bandwidth. These specifications are modest by modern standards, and the data shows they translate to mid-tier performance in To The Core. The GPU’s average benchmark score of 20556 places it in the 65th percentile of all graphics cards, which is a solid but unremarkable standing.

The card’s clock speeds are locked at 2500 MHz for both base and boost, which is unusual and indicates a fixed operating point. With 2304 shading units, 144 texture mapping units, and 80 raster operation units, the B570 is configured for 1080p and 1440p gaming rather than 4K. The measured FPS data supports this: at 1080p High, the combo hits 165 FPS, but at 4K High, it falls to 64 FPS, a drop of over 60%.

The GPU’s 10 GB VRAM is sufficient for To The Core at all tested settings, as the game does not appear to exceed this capacity based on the consistent performance across presets. The memory bandwidth of 380.0 GB/s is adequate for the game’s demands, but it is not exceptional. The B570’s nearest rival, the Intel Arc A750, scores 0.1% lower on average, meaning the two cards are nearly interchangeable in performance, though the B570 is the newer design.

The GPU’s role in this combo becomes clearer when examining the frame rate data. At 1080p Low, the combo reaches 225 FPS, but at 4K Ultra, it drops to 51 FPS. This 74% performance loss across the resolution and settings spectrum is a hallmark of a GPU-bound system, where the graphics card’s pixel throughput limits the frame rate. The CPU’s contribution is minimal in this scenario, as even a faster processor would not overcome the GPU’s 11.52 TFLOPS FP32 compute ceiling.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound scaling as resolution increases. At 1080p Low, the combo achieves 225 FPS, which drops to 152 FPS at 1440p Low (a 32% decrease) and further to 87 FPS at 4K Low (a 43% decrease from 1440p). This steep decline is indicative of a graphics card that is struggling to fill the increasing pixel count, while the CPU remains underutilized.

The pattern holds across all settings. At High, the combo delivers 165 FPS at 1080p, 111 FPS at 1440p, and 64 FPS at 4K. The 4K result is particularly telling, as it is only 39% of the 1080p score, suggesting the GPU is hitting its limits. At Medium, the FPS drops from 191 at 1080p to 128 at 1440p and 73 at 4K, with the 4K result showing a minimum FPS of 62, which is barely above the 60 FPS threshold.

Ultra settings amplify the GPU bottleneck. The combo manages 133 FPS at 1080p Ultra, 89 FPS at 1440p Ultra, and 51 FPS at 4K Ultra. The 4K Ultra result is the only configuration that falls below 60 FPS, indicating that this resolution and preset combination is beyond the GPU’s capabilities. The scaling from 1440p to 4K shows a 43% performance drop, which is steeper than the 33% drop from 1080p to 1440p, suggesting the GPU’s memory bandwidth and compute resources are being saturated.

This scaling behavior points to the GPU as the limiting component, not the CPU. The Ryzen 5 7400F, with its 6 cores and 12 threads boosting to 4.70 GHz, is more than capable of feeding the GPU at 1080p and 1440p, as evidenced by the high frame rates at those resolutions. At 4K, however, the GPU’s 160-bit memory bus and 380.0 GB/s bandwidth become the constraint, and the CPU’s extra headroom goes unused.

Settings Recommendations

Based on the measured FPS data, the Medium preset at 1440p offers the best balance of visual quality and performance for this combo. The combo achieves 128 FPS at 1440p Medium, with a minimum FPS of 109 and a maximum of 147, providing a smooth and consistent experience. This configuration is well above the 60 FPS threshold and leaves headroom for frame rate spikes without dipping below playable levels.

For players who prioritize frame rate over visual fidelity, the Low preset at 1080p is the standout choice, delivering 225 FPS. This is more than enough for high-refresh-rate monitors and ensures the game runs with minimal input lag. The Low preset at 1440p also performs well at 152 FPS, making it a viable option for those who want higher resolution without sacrificing smoothness.

At 4K, the Medium preset is the only viable option, with an average FPS of 73 and a minimum of 62. This keeps the game playable, but the Low preset at 87 FPS offers a safer margin above the 60 FPS threshold. The High and Ultra presets at 4K are not recommended, as they drop to 64 FPS and 51 FPS respectively, with the latter falling below the playable threshold.

The Ultra preset is best avoided at all resolutions above 1080p. At 1440p, it delivers 89 FPS, which is playable but not optimal, while at 4K it drops to 51 FPS. At 1080p, the Ultra preset achieves 133 FPS, which is acceptable, but the Medium preset at 191 FPS offers a better experience with only a minor visual trade-off. Overall, the data suggests that Medium settings at 1440p are the sweet spot for this combo.

FAQ

*Q: What is the combo’s rank in To The Core?*

A: The AMD Ryzen 5 7400F and Intel Arc B570 combination ranks 2380 out of 2991 tested combos, placing it in the bottom 20% of systems for this game.

*Q: Can this combo handle 4K gaming in To The Core?*

A: At 4K, the combo is limited to Medium settings for a playable experience, achieving 73 FPS on average with a minimum of 62 FPS. Low settings reach 87 FPS, but High and Ultra drop to 64 FPS and 51 FPS respectively.

Q: Which component is the bottleneck in this pairing?

A: The Intel Arc B570 is the limiting factor, as the GPU’s performance drops sharply with increasing resolution. The CPU, which ranks in the 83rd percentile, has more headroom than the GPU’s 65th percentile ranking.

Q: What is the best settings preset for this combo at 1440p?

A: The Medium preset at 1440p offers the best experience, delivering 128 FPS on average with a minimum of 109 FPS. This provides a smooth and consistent frame rate without significant visual compromises.

Q: How does the Arc B570 compare to its nearest rivals?

A: The Arc B570 scores 0.1% higher than the Intel Arc A750 and 0.1% lower than the NVIDIA GeForce RTX 3070 Mobile in average GPU benchmarks, placing it in a tight cluster of mid-range cards.

Q: Is the 1080p performance sufficient for high-refresh-rate displays?

A: Yes, the combo achieves 225 FPS at 1080p Low and 191 FPS at 1080p Medium, which is more than enough for 144Hz or even 240Hz monitors. Even at Ultra, it maintains 133 FPS.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Raphael, and built on a 5 nm process by TSMC. It features a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. This configuration gives the CPU a strong multi-threaded presence, as evidenced by its Cinebench R23 multi-core score of 21765 and single-core score of 3072.

In To The Core, the CPU’s role is secondary to the GPU, as the game’s performance is largely determined by graphical settings and resolution. The CPU’s high benchmark scores, including a PassMark multi-thread score of 25645 and a single-thread score of 3689, indicate it is more than capable of handling the game’s processing demands. The 83rd percentile ranking among all CPUs confirms that the 7400F is a well-above-average processor, but this strength does not translate to higher frame rates when the GPU is the bottleneck.

The CPU’s 65W TDP and Dual-channel DDR5 memory support with 83.2 GB/s bandwidth contribute to its efficiency, but these factors have minimal impact on To The Core’s frame rates. The processor’s PCIe Gen 5 interface with 24 lanes provides ample bandwidth for the GPU, though the B570 uses PCIe 4.0 x8, which is sufficient for this game. The CPU’s nearest rivals include the Intel Core i5-14600T and the AMD Ryzen 7 PRO 6850H, with the 7400F scoring 0.1% higher than the former and 0.2% lower than the latter in average benchmarks.

The data shows that the CPU becomes less relevant as resolution increases. At 1080p, the CPU’s performance allows the GPU to reach high frame rates, but at 4K, the GPU’s limitations dominate, and the CPU’s extra capacity goes unused. This is typical for a mid-range GPU pairing, where the processor is rarely the limiting factor. Players with this combo should focus on GPU settings rather than CPU optimization, as the graphics card determines the experience in To The Core.