To The Core

To The Core

AVERAGE FPS
131
excellent

This combination delivers exceptional performance with an average of 131 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 68 78 93
1440p QHD 95 119 137 162
1080p Full HD 142 176 204 241

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 93
3840x2160 Medium 78
3840x2160 High 68
3840x2160 Ultra 55
2560x1440 Low 162
2560x1440 Medium 137
2560x1440 High 119
2560x1440 Ultra 95
1920x1080 Low 241
1920x1080 Medium 204
1920x1080 High 176
1920x1080 Ultra 142

To The Core with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 2060, In-Depth Analysis

To The Core, a 2024 idle game, presents an unusual stress test for a desktop combo. The measured frame rates for this pairing—AMD's 6-core Ryzen 5 4600G and NVIDIA's 6 GB RTX 2060—exceed a typical idle-game requirement, yet the data obscures a nuanced story about which component governs performance. The combo ranks 2938th out of 3725 tested configurations in this title, placing it well below the median, but the absolute FPS values are often high enough for smooth play. This analysis unpacks the measured results to identify the bottleneck, the component contribution, and the practical window for each resolution preset.

Resolution Scaling

The measured FPS data reveals how heavily the system depends on resolution. At 1080p with Low settings, the average frame rate is 24×1 per second. Dropping to 1440p Low yields 162 FPS, and at 4K Low it falls to 93 FPS. Even at Medium settings, 1080p yields 204 FPS, 1440p yields 137, and 4K yields 78. The gap between 1080p and 4K is roughly the same across preset tiers—about 148–150 FPS at Low, 126–128 at Medium, and so on. This direct, proportional falloff points squarely to a GPU-bound situation: the pixel fill rate is saturated before the CPU becomes the limit.

The 4K Ultra reading is the hardest, averaging 55 FPS, which is a significant drop from the 1080p Ultra 142 FPS. The same relative decline appears at every settings tier, so the limiting element—clearly the GPU's ability to shade and output geometry—scales with pixel count regardless of render load. The CPU, meanwhile, holds its ground at lower resolutions; 1080p Low yields 241 FPS, which is near the top of the typical 240 Hz monitor range, and even 1080p Ultra remains above 140 FPS. As the resolution rises, the GPU's workload becomes more dominant, confirming that the combination has no CPU headroom to spare at 1080p, but is wholly GPU-limited from 1440p upward.

GPU Role

The RTX 2060 is a Turing architecture part with 6GB of GDDR6 memory on a 192-bit bus, providing a peak bandwidth of 336.0 GB/s. Its base clock is 1365 MHz, boosting to 1680 MHz. The GPU's average benchmark score is 15110 with a percentile of 58, placing it near the middle of the database. Its nearest rivals on paper include the GeForce GTX 580 (avg score 15283, deltaPct 0.0), the AMD Radeon 680M (15260, deltaPct 0.1), and the NVIDIA GeForce RTX 3050 OEM (15199, deltaPct 0.6). The RTX 2060 has a higher average than all three by 7–21 points, which translates to a barely measurable percentage.

When subjected to actual in-game measurements, the GPU clearly holds up to its benchmark position. The 1080p Low result of 241 FPS is nearly 60% higher than the 4K Low of 93 FPS, a scaling that is typically indicative of fill-rate saturation. The 6GB VRAM capacity might become a concern at 4K, but the game is an idle title, and the measured data does not include VRAM utilization. What the data suggests is that the GPU's raw throughput—its 1080p to 4K degradation pattern—is the primary limit across all settings. The 2060's Turing architecture with support for DirectX 12 Ultimate and Vulkan 1.4 ensures compatibility, but the core performance benchmarks (PassMark G3D 14111, 3DMark Steel Nomad 1242) hold the same tier rank as the GTX 580.

CPU Role

On the processor side, the AMD Ryzen 5 4600G brings 6 cores and 12 threads on the Zen 2 architecture, with a boost clock of 4.2 GHz. Its Cinebench R23 multicore score is 13593, and the single-core score is 1919, reflecting solid single-thread throughput typical of a 2020 mainstream chip. The ryzen 5 4600G's average benchmark score is 17507, with a percentile rank of 71 against all CPUs. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE (17482, deltaPct 0.1), the AMD Ryzen 3 8300GE (17614, deltaPct -0.6), the Intel Core 7 150U (17395, deltaPct 0.6), and the Intel Core i3-14100T (17608, deltaPct -0.8) — all within about half a percent of each other. This places the 4600G in a competitive mid-trend scaffold.

In To The Core, the CPU plays a secondary role because the game's simplified idle logic does not demand multi-threaded crunching; even at 1080p Low, the CPU must disassemble many frames, yet the 241 FPS result proves it can handle that. The data points show that at 1440p and 4K, the CPU provisioning is not the bottleneck. Notice that at each resolution, the average FPS for Low, Medium, and High settings all are above 50, and only the Ultra preset at 4K falls to 55. This cutline suggests that the CPU's single-thread ability is ample for the render workload; otherwise we'd see differences between settings at the same resolution, but the 1080p and 1440p have a more uniform offset across presets, again indicating GPU fill-rate walls.

How This Combo Ranks

The combo position in Khmeck's ranked list is 2938 out of 3725 tested executions, meaning it outperforms only 787 other pairings. This percentile standing makes it very clear that the combo does not lead the table in To The Core. The measured FPS data contradicts that low rank at first glance: a 1080p Low of 241 and 1440p Medium of 137 are impressive. However, rank likely weighs a combination of lower-bound frame stability, 4K capability, and perhaps the game's adaptive refresh preference. The rank of 2934 suggests that the system is overall in the lower 50% of pairings—likely because the GPU, while competent, is dated and cannot handle 4K-ultra smoothly. The RTX 2060's score in passmark g3d 14111 is close to GTX 580 (15293, deltaPct 0) but the VRAM 6GB might be insufficient for maxed-out textures. Also, the Ryzen 5 4600G's integral graphics are not used here, but the board is paired with the discrete card, meaning any APU advantage is moot.

Because the game is idle, the ranking might incorporate long-latency scenarios not represented by the short FPS test we huddled. However, with a rank of only the 787th worst, a gamer could still find the 1440p Medium optimal, as will be recomputed in the FAQ.

FAQ

Q: What is the maximum average FPS in this combo at 1080p?

A: At 1080p, the highest average is 241 FPS on Low settings, and drops to 142 at Ultra.

Q: Can this system maintain 144 FPS at 1440p?

A: According to the measurement, at 1440p Medium the average is 137 FPS, which is below 144, but the Low preset reaches 162; you would need to select Medium or lower to stay above 137 at 1440p, and Ultra drops to 95.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The GPU's average score is 15210, which is 17 points above the Radeon 680M (15270) and 11 points above the RTX 3050 OEM (15199). Its delta percentage to the GeForce GTX 580 is 0.0, and to the AMD Radeon RX 7600 it is 0.8. In raw compute terms, the 2060 sits almost exactly along the same benchmark plateau as those cards.

Q: What is the CPU's single-thread capability?

A: The Ryzen 5 4600G scores 1919 in Cinebench R23 single-core and 726 in 3DMark single-thread. This supporting a 1080p Monitor with a 240Hz refresh is only just achievable at Low settings, where the frame rate hits 241.

Q: Is 6 GB of VRAM enough for To The Core?

A: The measured frames do not include specific VRAM usage, so the data cannot answer definitively. The GPU offers 6 GB GDDR6 with a 336.0 GB/s bandwidth, which is within the typical range for modern games, but the lack of measured usage prevents a concrete conclusion.

Q: What does the combo rank mean?

A: A rank of 2938 out of 3725 places the combination in the bottom 21.2% (since 2938 is below middle). Stronger combos demonstrate better 4K Ultra discipline; this one peaks at 55 in 4K Ultra.

Measured FPS Breakdown

The following table lists every measured average, min, and max value as provided in the FACT PACK.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|-------------|----------|---------|---------|---------|

| 3840x2160 | High | 68 | — | — |

| 3840x2160 | Low | 93 | — | — |

| 3840x2160 | Medium | 78 | "67" | "90" |

| 3840x2160 | Ultra | 55 | — | — |

| 2560x1440 | High | 119 | — | — |

| 2560x1440 | Low | 162 | — | — |

| 2560x1440 | Medium | 137 | 116 | 157 |

| 2560x1440 | Ultra | 95 | — | — |

| 1920x1080 | High | 176 | — | — |

| 1920x1080 | Low | 241 | — | — |

| 1920x1080 | Medium | 204 | 173 | 234 |

| 1920x1080 | Ultra | 142 | — | — |

Notable min/max intervals exist only for Medium settings, where the can fluctuate between 173 and 234 at 1080p, 116–157 at 1440p, and 67–90 at 4K. This variation suggests a stable frame time at medium presets.

Settings Recommendations

The best experience per measured rows depends on the target refresh and resolution. For 1080p, every setting except Ultra exceeds 142 FPS; Ultra still gives 142 or slightly less. If the monitor is 120–144Hz, Medium-with-lower-settings is a safe choice to stay between 173 and 204 FPS. For 1440p, Medium is the first setting that remains above 144 FPS (137 actually is below), but Low gives 162, so Low is the only preset that stays above 144 FPS at 1440p. High at 119 and Ultra at 95 are playable but not for high-refresh. At 4K, the only settings that reach 60 FPS are Low (93) and Medium (78); High is 68, while Ultra at 55 requires a 55Hz-capable display or adaptive V-Sync.

Given the idle genre, a balance of visual quality and framerate might be taken at 1080p Medium (204 FPS) or 1440p Medium (137) if quality outweighs the last 10 FPS. For a smooth 60-cap mouse experience, the 4K Low preset is most viable at 93 FPS. The data indicate that the RTX 2060 benefits most from lowering shadow/pixel heavy descriptors rather than heavy ones; the GPU is responsible for all of them. Thus, we would recommend 1440p Low for competition, 1440p Medium for a smoothed visual, and 1080p Ultra for detail if the monitor can handle the CPU’s 142 FPS.

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1680 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 2060 in To The Core

Resolution Settings Avg FPS
3840x2160 Low 93.0
3840x2160 Medium 78.0
3840x2160 High 68.0
3840x2160 Ultra 55.0
2560x1440 Low 162.0
2560x1440 Medium 137.0
2560x1440 High 119.0
2560x1440 Ultra 95.0
1920x1080 Low 241.0
1920x1080 Medium 204.0
1920x1080 High 176.0
1920x1080 Ultra 142.0

To The Core with Ryzen 5 4600G + Other GPUs

See how To The Core performs with the same CPU but different graphics cards.

To The Core with RTX 2060 + Other CPUs

See how To The Core performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + RTX 2060

Explore FPS benchmarks for other games using this same hardware combination.