Thief

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 combination delivers a robust experience in Thief, a 2014 stealth title. The data shows this pairing ranks 320th out of 1,642 tested combos, placing it in the top 20% of all systems. Across all tested resolutions and settings, the RTX 4070’s 12 GB of GDDR6X memory and 5 nm Ada Lovelace architecture prove more than sufficient for this title, which was released over a decade ago. The Ryzen 5 7600’s six Zen 4 cores and 5.10 GHz boost clock provide ample headroom, as evidenced by the high frame rates even at 1080p. This analysis breaks down the measured FPS data, the role of each component, and what the numbers imply for gameplay.

FAQ

*Q: How does this combo rank against all other tested CPU-GPU pairings in Thief?*

A: The combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 ranks 320th out of 1,642 tested combos. This places it in the top 19.5% of all systems tested, indicating strong overall performance for this specific title.

*Q: What is the best average FPS this combo achieves in Thief?*

A: The highest average frame rate recorded is 190.5 FPS at 1920x1080 with Low settings. This shows the system can push far beyond typical display refresh rates at the lowest quality preset.

Q: What is the lowest average FPS recorded for this combo?

A: The lowest average frame rate is 57.5 FPS, achieved at 3840x2160 with Ultra settings. This remains above the 60 FPS threshold for smooth gameplay, though it is the only measured result that dips below that mark.

Q: How does the CPU's benchmark score compare to its nearest rival?

A: The Ryzen 5 7600 has an average benchmark score of 26,617. This is 0.2% higher than the AMD Ryzen 7 5800X3D, which scores 26,574, and 0.3% higher than the Intel Core i9-11900K, which scores 26,546.

Q: How does the GPU's benchmark score compare to its nearest rival?

A: The RTX 4070 has an average benchmark score of 37,283. This is 2.5% higher than the AMD Radeon RX 5300M, which scores 36,371, but 0.6% lower than the AMD Radeon RX Vega 56, which scores 37,507.

Q: Does the data show the CPU or GPU as the limiting factor at 1080p?

A: At 1920x1080, the frame rate difference between Low (190.5 FPS) and Ultra (140.6 FPS) is significant, but both are extremely high. The relatively small 26% drop from Low to Ultra at this resolution suggests the CPU is providing enough throughput to keep the GPU well-fed, with the GPU becoming more stressed as settings increase.

GPU Role

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture using a 5 nm process from TSMC. Its 12 GB of GDDR6X memory operates across a 192-bit bus, delivering a bandwidth of 504.2 GB/s. The GPU’s boost clock is listed at 2475 MHz, with a base clock of 1920 MHz. In Thief, the GPU’s memory capacity is more than adequate, as the game’s demands are well below the 12 GB available.

The benchmark data shows the GPU’s performance scaling with settings. At 3840x2160, the average FPS drops from 100.5 at Low to 57.5 at Ultra, a 43% reduction. This indicates that the RTX 4070’s compute resources — 5,888 shading units and 64 ROPs — are being increasingly taxed as visual fidelity rises. The GPU’s 29.15 TFLOPS of FP32 performance is clearly sufficient for this title, as even the most demanding preset at 4K remains playable. Interestingly, the GPU’s percentile ranking of 81st among all GPUs, combined with a PassMark G3D score of 26,927, suggests it is a high-tier part that excels in older titles like Thief where its modern architecture is not fully stressed.

How This Combo Ranks

This specific combination of the Ryzen 5 7600 and RTX 4070 achieves a rank of 320 out of 1,642 total tested combos in Thief. This percentile placement — roughly the 80.5th percentile — indicates that the system outperforms the vast majority of tested hardware pairings. The CPU’s percentile ranking of 83rd among all CPUs and the GPU’s ranking of 81st among all GPUs are closely aligned, suggesting a balanced pairing where neither component is drastically holding back the other.

The data shows that this combo is positioned well above mid-range systems, but not at the absolute top tier. The nearest CPU rival, the AMD Ryzen 7 5800X3D, has a nearly identical average score (26,574 vs 26,617, a 0.2% difference), implying that swapping to that CPU would yield negligible changes in Thief. On the GPU side, the RTX 4070 is 2.5% faster than the AMD Radeon RX 5300M, but 0.6% slower than the AMD Radeon RX Vega 56. This suggests the combo’s rank is driven more by the GPU’s performance in this specific game than by the CPU’s raw compute power.

Measured FPS Breakdown

At 1920x1080, the system delivers consistently high frame rates across all settings. Low settings produce an average of 190.5 FPS, Medium yields 175.2 FPS, High drops to 145.9 FPS, and Ultra maintains 140.6 FPS. The spread from Low to Ultra is 49.9 FPS, or a 26% decrease, which is relatively modest and indicates the GPU is not the bottleneck at this resolution.

Moving to 2560x1440, the numbers remain strong but show a clearer scaling pattern. Low settings average 169.4 FPS, Medium achieves 130 FPS, High hits 99.6 FPS, and Ultra falls to 94.7 FPS. The drop from Low to Ultra is 44% here, reflecting increased GPU load as pixel count rises.

At 3840x2160, the frame rates show the most significant impact. Low settings average 100.5 FPS, Medium reaches 77.2 FPS, High dips to 61.7 FPS, and Ultra bottoms out at 57.5 FPS. The difference between Low and Ultra at 4K is 43 FPS, a 43% reduction. This pattern confirms that the RTX 4070’s performance scales predictably with resolution, and at 4K Ultra, the system barely maintains playable frame rates.

CPU Role

The AMD Ryzen 5 7600 is a six-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process. Its base clock is 3.80 GHz, boosting up to 5.10 GHz. The CPU has a 32 MB shared L3 cache and supports DDR5 memory with a dual-channel bus, providing 83.2 GB/s of bandwidth. In Thief, which is not a heavily threaded title, the CPU’s single-thread performance is critical.

The CPU’s benchmark scores reflect strong single-thread capability: a 3DMark single-thread score of 999 and a Cinebench R23 single-core score of 3,246. The multi-thread scores, such as Cinebench R23 multicore at 22,992, show that the six cores are well-utilized if needed. The CPU’s average benchmark score of 26,617 places it 0.2% above the Ryzen 7 5800X3D, indicating that for Thief’s engine, the 7600’s higher clocks and newer architecture offset the X3D’s larger cache. The data shows that at 1080p, where the CPU is more likely to be a factor, the system still achieves 140.6 FPS at Ultra, suggesting the CPU is not limiting performance in this game.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution. At 1920x1080, all settings provide well above 140 FPS, so Ultra is recommended for the best visual quality without compromising smoothness. The 140.6 FPS average at Ultra is more than sufficient for high-refresh-rate displays.

At 2560x1440, Ultra settings average 94.7 FPS, which is still very smooth. However, High settings at 99.6 FPS offer a marginal FPS increase with a minor visual downgrade. For most users, High provides the best balance, as the 5 FPS difference is negligible.

At 3840x2160, the choice becomes more critical. Ultra averages 57.5 FPS, which may be acceptable for slower-paced stealth gameplay, but High at 61.7 FPS barely crosses the 60 FPS threshold. Medium at 77.2 FPS offers a much more comfortable margin and is likely the best experience for 4K, as the visual difference between Medium and High in a 2014 title is often minimal. Low at 100.5 FPS is an option for maximum smoothness, but the graphical compromise may not be worth it.

Resolution Scaling

The FPS data shows a clear scaling trend from 1080p to 4K. At Low settings, the average FPS drops from 190.5 at 1080p to 169.4 at 1440p (an 11% decrease) and then to 100.5 at 4K (a 47% decrease from 1440p). This steep drop at 4K indicates that the GPU is becoming the primary limiting factor as resolution increases.

At Ultra settings, the scaling is more dramatic: 140.6 FPS at 1080p, 94.7 FPS at 1440p (a 33% decrease), and 57.5 FPS at 4K (a 39% decrease from 1440p). The consistent ~40% drop from 1440p to 4K across all settings suggests that the GPU’s pixel throughput is the bottleneck at higher resolutions. Conversely, the relatively smaller drop from 1080p to 1440p (11% at Low, 33% at Ultra) implies that at lower resolutions, the CPU’s performance is more relevant, but still not a hard limit. The data points to the RTX 4070 as the component determining frame rates at 4K, while the Ryzen 5 7600 provides adequate headroom at lower resolutions to avoid bottlenecking.