The Technomancer

The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 5090 combination ranks 5th out of 1,656 tested combos in The Technomancer, placing it in the top 0.3% of all systems evaluated. This is a dominant position that reflects the raw capability of both components working in tandem. The ranking confirms that this pairing is not merely adequate for the game but is among the absolute fastest configurations available, with only four other combinations delivering higher average frame rates.

How This Combo Ranks

The combo's 5th-place finish out of 1,656 tested configurations is a statement of near-total performance supremacy. Benchmark results indicate that this pairing sits at the very top of the performance pyramid for The Technomancer, outperforming the overwhelming majority of systems by a significant margin. The data shows a clear hierarchy: this combo is positioned to deliver frame rates that are attainable only by a handful of other hardware pairings. While the exact gap to the top spot is not quantified, the ranking alone signals that users can expect a level of performance that leaves virtually no headroom for improvement within the game's current engine limits. In practical terms, this rank means the system will rarely, if ever, be the bottleneck in gameplay, allowing the game to run at its absolute maximum potential regardless of the in-game scenario.

GPU Role

The NVIDIA GeForce RTX 5090 is the driving force behind this combo's exceptional performance. It features 32 GB of GDDR7 memory on a 512-bit bus, delivering a bandwidth of 1.79 TB/s. This massive memory allocation and bandwidth are crucial for The Technomancer, a game that can be demanding on video memory at higher resolutions and settings. The GPU's boost clock of 2407 MHz, combined with its 21,760 shading units and 176 ROPs, provides the computational horsepower needed to push high frame rates. Its pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s ensure that even the most complex scenes are rendered without delay. The RTX 5090's benchmark scores further contextualize its role: with a 3DMark Steel Nomad DX12 score of 14,411 and a Passmark G3D score of 39,650, the data shows a GPU operating at the apex of consumer hardware. Its percentile rank of 94 among all GPUs underscores that it is a top-tier component, and its nearest rival, the RTX 5090 D, is only 0.1% faster on average, a negligible difference in real-world gaming. In The Technomancer, the GPU is clearly the primary determinant of frame rates, especially when the resolution and settings are cranked up.

Resolution Scaling

The measured FPS data reveals a predictable and steep scaling curve as resolution increases, highlighting the GPU's dominant role. At 1080p with Low settings, the combo achieves 335.2 FPS. Moving to 1440p at the same Low settings drops this to 219.7 FPS, a 34.5% reduction. At 4K with Low settings, the frame rate falls to 121.3 FPS, a further 44.8% drop from 1440p. This pattern is consistent across all settings presets. For instance, on High settings, the frame rate goes from 224.3 FPS at 1080p, to 148.4 FPS at 1440p, and finally to 81.3 FPS at 4K. This steep decline as resolution increases is the classic signature of a GPU-bound scenario. The CPU, with its 12 cores and 24 threads, is not the limiting factor here; the data indicates that the rendering load is squarely on the RTX 5090. The 4K Ultra result of 63.5 FPS, while still playable, demonstrates the immense strain that higher resolutions place on even the most powerful GPU. The differences between settings at each resolution also point to the GPU's headroom: at 1080p, the delta between Low and Ultra is 157.4 FPS, while at 4K, it is only 57.8 FPS, showing that at higher resolutions, the GPU is working closer to its limits.

Measured FPS Breakdown

The data provides a complete picture of performance across resolutions and settings.

1080p: At this resolution, the combo is heavily GPU-bound but has massive headroom. Low settings produce an average of 335.2 FPS, which is exceptionally high and ideal for competitive play. Medium settings yield 262.1 FPS, while High settings drop to 224.3 FPS. Even at the demanding Ultra preset, the system maintains a very high 177.8 FPS average. These numbers indicate that at 1080p, the RTX 5090 is rarely stressed, and the frame rates are limited more by the game engine's frame pacing than by hardware capability.

1440p: This is the sweet spot for high-refresh-rate gaming with this combo. Low settings deliver 219.7 FPS, which is still extremely fluid. Medium settings come in at 170.2 FPS, and High settings at 148.4 FPS. The Ultra preset, which is the most demanding, still achieves an excellent 111.6 FPS. The drop from 1080p to 1440p is significant, but the performance remains far above the threshold for smooth gameplay on any high-refresh-rate monitor.

4K: At 3840x2160, the GPU's workload becomes substantial. Low settings still produce a very playable 121.3 FPS. Medium settings drop to 92.7 FPS, and High settings to 81.3 FPS. The Ultra preset at 4K yields 63.5 FPS, which is the only measured configuration that dips below the 100 FPS mark. This is the point where the RTX 5090's limits are finally visible, and users aiming for 4K Ultra will need to accept frame rates in the 60s or consider adjusting settings.

FAQ

Q: What is the combo's overall rank in The Technomancer?

A: It ranks 5th out of 1,656 tested combos, placing it in the top 0.3% of all configurations benchmarked.

Q: What is the highest average frame rate this combo can achieve?

A: The highest measured average is 335.2 FPS, achieved at 1920x1080 resolution with Low settings.

Q: Can this combo handle 4K Ultra settings?

A: Yes, it achieves an average of 63.5 FPS at 3840x2160 with Ultra settings, which is above the threshold for standard 60 Hz displays.

Q: How does the CPU compare to its closest rival?

A: The AMD Ryzen 9 9900X has an average benchmark score of 54,450, which is 0.4% lower than the AMD Ryzen 9 9900X3D and 0.7% higher than the Intel Core i7-14700F.

Q: What is the GPU's performance percentile?

A: The NVIDIA GeForce RTX 5090 ranks in the 94th percentile among all GPUs, with an average benchmark score of 84,306.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: The difference is 108.1 FPS, with Low settings achieving 219.7 FPS and Ultra achieving 111.6 FPS.

Settings Recommendations

The measured FPS data suggests that the optimal experience depends heavily on the target resolution and refresh rate. For users with a 1080p 240Hz or 360Hz monitor, the High preset at 224.3 FPS or even the Ultra preset at 177.8 FPS will fully utilize the display's capabilities. At 1440p, the High preset at 148.4 FPS is an excellent choice for 144Hz monitors, while the Ultra preset at 111.6 FPS is still suitable for high-refresh displays and offers the best visual fidelity. For 4K gaming, the High preset at 81.3 FPS is the most balanced option, providing a substantial visual upgrade over Medium while remaining well above 60 FPS. The Ultra preset at 63.5 FPS is viable for cinematic single-player experiences, but users who prioritize frame rate consistency should stick with High. The Low preset is only recommended for competitive play at 1080p or 1440p where maximum frame rates are paramount, as the visual sacrifices are significant. The data clearly shows that the High preset is the "sweet spot" for this combo, offering a strong balance of visual quality and performance across all three resolutions.

CPU Role

The AMD Ryzen 9 9900X is a Zen 5 architecture processor with 12 cores and 24 threads, operating from a base clock of 4.40 GHz to a boost clock of 5.60 GHz. Its benchmark scores are exceptional: a Cinebench R23 multi-core score of 46,438 and a single-core score of 6,555, along with a Geekbench multi-core score of 19,827. These figures place it in the 94th percentile of all CPUs. However, in The Technomancer, the CPU's role is secondary. The resolution scaling data shows that frame rates drop significantly from 1080p to 4K (from 335.2 FPS to 121.3 FPS on Low settings), which is a classic indicator of GPU bottlenecking. The CPU is powerful enough to feed the RTX 5090 at all but the most extreme frame rates. Its 64 MB of shared L3 cache and 89.6 GB/s memory bandwidth ensure that game logic, AI, and physics calculations are handled without introducing stutter or frame pacing issues. The CPU's 3DMark multi-thread score of 13,929 and single-thread score of 1,286 show that it has both the multi-core throughput for modern game engines and the single-thread strength for legacy code paths. In this combo, the CPU provides a stable foundation, but the measured performance is overwhelmingly dictated by the GPU's capabilities. The CPU does not hinder the RTX 5090 in any measurable way, as evidenced by the high frame rates even at 1080p Low, where a weaker CPU would typically limit performance.