The Technomancer

The AMD Ryzen 9 7900X paired with the AMD Radeon RX 9060 lands at rank 1632 out of 2825 tested combos in The Technomancer. That places it in the lower-middle portion of the database, which is a meaningful signal: this is not a combo built to dominate this 2016 Action RPG, but rather one that delivers a playable experience at most settings without pushing the extremes of the leaderboard. The CPU is a strong contributor here, as the Ryzen 9 7900X sits in the 91st percentile among all CPUs tested, with an average benchmark score of 53288. That puts it just 0.2% ahead of the AMD EPYC 7313P and 0.6% ahead of the Intel Xeon 634, while trailing the Intel Core i7-14700F by 0.6% and the Intel Xeon Phi 7290 by 0.3%. The GPU, however, is the bottleneck in this equation: the Radeon RX 9060 holds only the 59th percentile among all GPUs, with an average score of 16014. That is 0.7% behind the NVIDIA GeForce RTX 3060 Ti, 1% ahead of the AMD Radeon R9 370X, and 2.1% ahead of the AMD Radeon Pro W5500. The gap between the CPU's high standing and the GPU's mid-pack position explains why this combo ranks where it does; the processor has headroom that the graphics card cannot fully exploit in this title.

Settings Recommendations

The measured FPS rows make the settings trade-off clear, and the data points to High as the best overall experience for this combo. At 1920x1080, High delivers 103 FPS average, which is smooth and well above the 60 FPS threshold. Dropping to Medium only costs a few frames at 120 FPS, but the visual quality loss is not worth the modest gain. Ultra at 1080p falls to 80 FPS, which is still playable, but the jump from High to Ultra brings a 23 FPS penalty (from 103 to 80) that most users will notice more than the visual improvement. Low at 1080p hits 157 FPS, but that setting strips away too much of the game's atmosphere for a title that relies on environmental storytelling. Moving up to 2560x1440, High remains the sweet spot at 67 FPS, which is just barely above the 60 FPS comfort line. Medium at 1440p gives 79 FPS, but again, the step down in quality is not justified by the 12 FPS gain. Ultra at 1440p drops to 52 FPS, which is where the experience starts to feel choppy. At 3840x2160, no setting reaches the 60 FPS target: High sits at 37 FPS, Medium at 43 FPS, and Low at 56 FPS, with Ultra bottoming out at 29 FPS. For 4K, Low is the only setting that approaches playability, but even then it is borderline. The data suggests that High preset is the intended experience for this hardware combination: it provides a stable frame rate at 1080p and 1440p, and it is the highest quality setting that remains within reach at lower resolutions.

Resolution Scaling

The FPS drop from 1080p to 4K at the High preset tells a clear story about which component is limiting performance. At High settings, the average frame rate goes from 103 FPS at 1920x1080 to 67 FPS at 2560x1440, a 35% reduction. Going from 1440p to 4K at High drops the frame rate from 67 to 37 FPS, a 45% reduction. The scaling is not linear, and the steep decline at higher resolutions points directly at the GPU as the constraint. The Radeon RX 9060 has 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s of bandwidth, and that memory subsystem is likely being saturated as pixel count rises. The CPU, by contrast, has 12 cores and 24 threads with a boost clock of 5.60 GHz, and it is not the limiting factor here; even at 1080p with Low settings, the combo reaches 157 FPS, which suggests the processor could push higher if the graphics card allowed it. The pattern across all settings confirms this: at 1080p, the spread between Low and Ultra is 77 FPS (from 157 to 80), while at 4K the spread narrows to 27 FPS (from 56 to 29). This narrowing indicates that at 4K, the GPU is working at its ceiling regardless of settings, and the CPU has little influence on the outcome. For users aiming for higher resolutions, the GPU is the component that needs upgrading; the Ryzen 9 7900X has ample headroom to support a faster graphics card.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings yield 157 FPS average, which is the highest figure measured anywhere in this dataset. Medium settings produce 120 FPS average, with a minimum of 102 FPS and a maximum of 138 FPS, showing a consistent frame delivery. High settings come in at 103 FPS average, which is still comfortable for most displays. Ultra settings drop to 80 FPS average, which remains playable but shows the cost of maxing out the game's visual options. The 1080p data demonstrates that the combo can handle this resolution with ease, even at the highest quality preset.

At 2560x1440, the numbers step down noticeably. Low settings reach 102 FPS average, which is still excellent. Medium settings deliver 79 FPS average, with a minimum of 67 FPS and a maximum of 90 FPS. High settings drop to 67 FPS average, which sits right at the edge of the 60 FPS target. Ultra settings fall to 52 FPS average, which is below the smoothness threshold and may be noticeable during fast action sequences. The 1440p results show that the combo can handle this resolution well at Low and Medium, but High and Ultra require a tolerance for occasional frame drops.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings produce 56 FPS average, which is the only 4K setting that approaches playability. Medium settings drop to 43 FPS average, with a minimum of 37 FPS and a maximum of 50 FPS, indicating inconsistent frame pacing. High settings fall to 37 FPS average, and Ultra bottoms out at 29 FPS average. None of the 4K settings provide a consistently smooth experience, and the data suggests that 4K is not a realistic target for this combo without significant compromises.

GPU Role

The Radeon RX 9060 is the defining component in this combo's gaming performance, and its specifications explain the observed results. The GPU has 8 GB of GDDR6 memory, which is adequate for 1080p and 1440p in this title, but the 128-bit memory bus and 288.0 GB/s bandwidth limit its ability to feed data at higher resolutions. The boost clock of 2990 MHz and game clock of 2400 MHz are respectable, but the 1792 shading units and 64 ROPs determine the raw pixel throughput. The pixel rate of 191.4 GPixel/s and texture rate of 334.9 GTexel/s are mid-range figures, and they show up in the 4K numbers where the GPU cannot maintain a playable frame rate. The GPU's FP32 performance of 21.43 TFLOPS positions it as a capable 1080p card, and the benchmark data supports this: the PassMark G3D score of 17631 and the 3DMark Steel Nomad DX12 score of 3322 place it in the 59th percentile overall. The GPU's nearest rival, the NVIDIA GeForce RTX 3060 Ti, edges it out by 0.7% in average score, which is a narrow margin that shows up in real-world gaming as a few frames per second difference. The 8 GB VRAM capacity is sufficient for this game's needs at 1080p and 1440p, but the memory bandwidth becomes a limiting factor as resolution increases. The GPU's TDP of 132 W is modest, and the single 8-pin power connector suggests it draws less power than larger cards, but this efficiency does not translate into high-resolution performance. In The Technomancer, the GPU's role is clear: it delivers solid 1080p performance, acceptable 1440p performance at lower settings, and falls short at 4K, where its memory subsystem and compute capacity are simply not enough.

FAQ

Q: What is the best resolution to play The Technomancer with this combo?

A: Based on the measured data, 1920x1080 is the best resolution. At High settings it delivers 103 FPS average, and even Ultra reaches 80 FPS. At 2560x1440, High drops to 67 FPS, which is playable but less comfortable. At 3840x2160, no setting reaches 60 FPS, with Low at 56 FPS and Ultra at 29 FPS.

Q: How does the Radeon RX 9060 compare to its closest rival in this game?

A: The Radeon RX 9060 has an average benchmark score of 16014, which is 0.7% behind the NVIDIA GeForce RTX 3060 Ti at 16129. It is 1% ahead of the AMD Radeon R9 370X and the AMD Radeon RX 7700, and 2.1% ahead of the AMD Radeon Pro W5500. The GPU's 59th percentile ranking among all tested GPUs reflects this mid-pack positioning.

Q: Is the Ryzen 9 7900X holding back the GPU in this game?

A: No, the data indicates the CPU is not the limiting factor. The Ryzen 9 7900X has a boost clock of 5.60 GHz and 12 cores, and it ranks in the 91st percentile among all CPUs. At 1080p with Low settings, the combo reaches 157 FPS, suggesting the CPU has headroom. The GPU's 8 GB memory and 288.0 GB/s bandwidth are the constraints, especially at higher resolutions.

Q: What settings should I use for a consistent 60 FPS experience?

A: At 1920x1080, High settings provide 103 FPS average, which is well above 60 FPS. At 2560x1440, High settings give 67 FPS average, which is just above the 60 FPS target. At 3840x2160, no setting reaches 60 FPS; the closest is Low at 56 FPS average, which is still below the target.

Q: How does the combo rank among all tested combinations for this game?

A: The combo ranks 1632 out of 2825 tested combinations. This places it in the lower-middle portion of the database, which is consistent with the GPU's 59th percentile standing and the CPU's 91st percentile standing. The CPU's high performance is not fully utilized due to the GPU's limitations.

Q: Does the combo have enough VRAM for The Technomancer?

A: The GPU has 8 GB of GDDR6 memory, which is sufficient for 1080p and 1440p in this game. At 4K, the memory bandwidth of 288.0 GB/s and the 128-bit bus become limiting factors, as shown by the steep FPS drops at that resolution. The VRAM capacity itself is not the issue; the bandwidth is the constraint.