The Technomancer

# The Technomancer: AMD Ryzen 7 9850X3D + AMD Radeon RX 6750 XT

The AMD Ryzen 7 9850X3D paired with the AMD Radeon RX 6750 XT delivers a broadly playable experience in The Technomancer, though performance varies sharply depending on resolution and quality preset. At 1080p, the combination produces high frame rates that easily satisfy standard display refresh rates, but at 4K, the GPU becomes the clear bottleneck, with frame rates dipping below 60 FPS on every preset except Low. The measured data indicates a system where the CPU’s substantial headroom goes largely unused at higher resolutions, while the GPU’s mid-range positioning dictates the overall experience ceiling.

Resolution Scaling

The transition from 1080p to 1440p to 4K reveals a steep performance curve that is almost entirely GPU-driven. At 1080p with High settings, the combo averages 117 FPS. Moving to 1440p at the same settings, the average drops to 77 FPS, a 34.2% reduction. Pushing further to 4K High yields just 42 FPS, which is a 64.1% drop from the 1080p result and a 45.5% drop from 1440p. This scaling pattern indicates that the rendering load increases faster than the GPU’s fill rate and shading capacity can sustain, especially as pixel count quadruples from 1080p to 4K.

Examining the Low preset across resolutions shows the same trend but with higher absolute values. At 1080p Low, the system produces 179 FPS. At 1440p Low, it falls to 117 FPS, a 34.6% reduction that closely mirrors the High preset’s relative drop. At 4K Low, the average is 64 FPS, which is a 64.2% decrease from 1080p Low. The consistency of these percentage drops across presets suggests that resolution scaling is uniform and independent of quality level, pointing to a purely pixel-bound limitation rather than a shader or texture complexity issue.

The Medium preset provides the only complete frame time data in the measured results. At 1080p Medium, the average is 138 FPS with a minimum of 117 and maximum of 158. At 1440p Medium, the average drops to 90 FPS with a range of 76 to 103. At 4K Medium, the average falls to 49 FPS with a minimum of 42 and maximum of 57. The minimum frame rates at each resolution stay proportionally close to the averages, indicating stable frame pacing without severe spikes. The data suggests that the limiting component shifts from the CPU at 1080p to the GPU at 4K, as the frame rate deltas between presets widen with increasing resolution.

GPU Role

The AMD Radeon RX 6750 XT is the dominant performance factor in this configuration. With 12 GB of GDDR6 memory on a 192-bit bus, the card provides 432.0 GB/s of bandwidth, which is substantial for a mid-range GPU of its generation. The 2560 shading units, 160 TMUs, and 64 ROPs deliver a texture rate of 416.0 GTexel/s and a pixel rate of 166.4 GPixel/s. The boost clock of 2600 MHz and game clock of 2495 MHz are relatively high for the RDNA 2 architecture, allowing the card to maintain competitive throughput in a 2016-era title like The Technomancer.

At 1080p, the GPU’s capabilities are more than sufficient, as evidenced by the 179 FPS Low result and 117 FPS High result. However, at 4K, the pixel rate of 166.4 GPixel/s becomes the limiting factor. The Ultra preset at 4K produces only 33 FPS, which is below the threshold for smooth gameplay on most displays. The GPU’s 12 GB memory capacity is not the constraint here, as The Technomancer is unlikely to exceed even 8 GB at 4K Ultra given its release date. Instead, the raw shading and rasterization throughput of the RX 6750 XT caps performance.

The GPU’s benchmark percentile of 71 versus all GPUs places it in the upper-mid range. Its nearest rivals in the synthetic benchmark database include the AMD Radeon R9 M395X, which scores 0.5% lower, and the AMD FirePro W7100 at 0.6% lower, while the NVIDIA GeForce RTX 3080 Ti Mobile is 1.1% higher. These deltas are minimal, indicating that the RX 6750 XT sits in a tightly clustered performance band. In The Technomancer, this translates to playable 1440p and acceptable 1080p Ultra, but 4K requires sacrificing quality to maintain frame rates.

Settings Recommendations

Based on the measured data, the Medium preset offers the most balanced experience across all three resolutions. At 1080p Medium, the average of 138 FPS with a minimum of 117 ensures smooth gameplay even during demanding scenes. At 1440p Medium, the 90 FPS average with a minimum of 76 keeps the experience fluid on high-refresh-rate monitors. At 4K Medium, the 49 FPS average with a minimum of 42 is playable, though it may not satisfy users targeting 60 FPS consistently.

The High preset is a viable alternative for users with 1080p or 1440p displays. At 1080p High, the 117 FPS average is still excellent, and at 1440p High, the 77 FPS average provides a good balance of visual quality and performance. However, at 4K High, the 42 FPS average falls below the 60 FPS threshold, making it unsuitable for competitive or fast-paced play.

The Ultra preset is only recommended for 1080p, where the 92 FPS average remains playable. At 1440p Ultra, the 60 FPS average is borderline, with any scene complexity likely to cause dips. At 4K Ultra, the 33 FPS average is essentially unplayable for most users. Conversely, the Low preset is unnecessary at 1080p or 1440p, as it yields 179 and 117 FPS respectively, far exceeding what most displays can show. At 4K Low, the 64 FPS average becomes the only preset that reliably hits 60 FPS, making it the sole option for 4K users who prioritize frame rate over visuals.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and AMD Radeon RX 6750 XT ranks 1262 out of 2825 tested combos in The Technomancer. This places the configuration in the 44.7th percentile of all tested systems, meaning slightly more than half of the tested combos perform better in this specific game. The rank reflects the GPU’s mid-range positioning rather than the CPU’s high-end capabilities, as the Ryzen 7 9850X3D is a top-tier processor that would not constrain performance in a title like The Technomancer.

The combo’s rank is consistent with the GPU’s overall benchmark percentile of 71, which is notably higher than the combo’s in-game percentile. This discrepancy suggests that The Technomancer is not particularly demanding on the GPU relative to other games in the benchmark suite, or that the game’s engine does not fully utilize the RX 6750 XT’s capabilities. The CPU’s percentile of 92 versus all CPUs is significantly higher, reinforcing that the processor is not the limiting factor in this pairing. For users considering this combo, the rank indicates that it is a capable but not exceptional performer in this title, with headroom for improvement if the GPU were upgraded.

CPU Role

The AMD Ryzen 7 9850X3D provides 8 cores and 16 threads based on the Zen 5 architecture, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. The 96 MB of shared L3 cache is a hallmark of the X3D series, designed to reduce memory latency in cache-sensitive workloads. The CPU’s benchmark scores are strong, with a Cinebench R23 multi-core score of 22807 and a single-core score of 2228. Its Passmark multi-thread score of 41318 and single-thread score of 4704 place it in the top tier of desktop processors.

In The Technomancer, the CPU’s role is minimal at higher resolutions, as the frame rate is constrained by the GPU. At 1080p, the CPU’s high single-core performance helps maintain the 179 FPS Low result, but even a less capable processor would likely achieve similar numbers given the game’s age. The CPU’s nearest rivals in the synthetic benchmark database include the Intel Xeon Platinum 8260M, which is 0.1% ahead, and the Intel Core i9-14900, which is 0.5% ahead. These deltas are negligible, indicating that the Ryzen 7 9850X3D’s performance is not a differentiator in this title.

The 120 W TDP and dual-channel DDR5 memory support with 89.6 GB/s bandwidth are more than sufficient for The Technomancer, which is unlikely to stress memory bandwidth heavily. The CPU’s 4 nm process node and 8,315 million transistors on a 70.6 mm² die reflect a modern, efficient design, but these attributes are irrelevant to the game’s frame rates, which are GPU-bound. The data confirms that the CPU is not a bottleneck in this configuration, and any performance gains from upgrading the processor would be negligible.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates span from 179 FPS on Low to 92 FPS on Ultra. The Medium preset averages 138 FPS with a minimum of 117 and maximum of 158. The High preset averages 117 FPS without reported minimum or maximum values. The progression from Low to Ultra shows a 48.6% reduction in average frame rate, indicating that quality settings have a significant impact on performance at this resolution.

At 2560x1440, the averages are 117 FPS on Low, 90 FPS on Medium, 77 FPS on High, and 60 FPS on Ultra. The Medium preset’s minimum of 76 FPS and maximum of 103 FPS show a tighter distribution than at 1080p, suggesting that the GPU is becoming more consistently loaded. The Ultra preset’s 60 FPS average is exactly at the threshold for many displays, but the lack of minimum frame rate data makes it difficult to assess stability.

At 3840x2160, the averages drop to 64 FPS on Low, 49 FPS on Medium, 42 FPS on High, and 33 FPS on Ultra. The Medium preset’s minimum of 42 and maximum of 57 indicate that even the average is optimistic, as frame rates dip below 45 FPS regularly. The gap between Low and Ultra at 4K is 31 FPS, a 48.4% reduction, which is similar to the 1080p scaling. This consistency suggests that the GPU’s performance scales predictably with settings, but the absolute values are too low for comfortable 4K gaming on anything above Low.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: 1920x1080 is the best resolution, as all presets exceed 92 FPS on average, with Low reaching 179 FPS and Medium at 138 FPS.

Q: Can this system handle 4K gaming in The Technomancer?

A: Only on the Low preset, which averages 64 FPS. Medium averages 49 FPS, High averages 42 FPS, and Ultra averages 33 FPS, all below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 9850X3D is 0.1% behind the Intel Xeon Platinum 8260M, 0.5% ahead of the Intel Core i9-14900, and 0.7% ahead of the AMD Ryzen AI 9 HX 470 in average benchmark score.

Q: What is the GPU’s performance percentile?

A: The AMD Radeon RX 6750 XT ranks in the 71st percentile versus all GPUs, with its nearest rival being the NVIDIA GeForce RTX 3080 Ti Mobile at 1.1% higher.

Q: Does the Medium preset provide consistent frame rates?

A: Yes, at 1080p Medium the minimum is 117 FPS, at 1440p Medium the minimum is 76 FPS, and at 4K Medium the minimum is 42 FPS, with maximums of 158, 103, and 57 respectively.

Q: How does this combo rank among all tested configurations?

A: It ranks 1262 out of 2825 tested combos, placing it in the 44.7th percentile for The Technomancer.