The Technomancer

The Technomancer is a 2016 Action RPG that, on paper, should not stress modern hardware. Yet, the combination of the AMD Ryzen 7 7800X3D and the NVIDIA GeForce RTX 4060 produces a set of benchmark results that are surprisingly nuanced, particularly at higher resolutions. This analysis breaks down the measured FPS data to determine where this combo excels, where it falls short, and what settings you should actually use.

How This Combo Ranks

Within the database of tested CPU and GPU combinations, this pairing of the AMD Ryzen 7 7800X3D and the NVIDIA GeForce RTX 4060 achieves a combo rank of 950 out of 1656 tested combos. This places it in the upper-middle tier of all possible pairings, indicating a solid, balanced setup that isn't at the very top of the performance heap but is far from a weak performer.

This ranking makes sense when you look at the individual components. The Ryzen 7 7800X3D is a high-end processor, sitting at the 87th percentile against all CPUs. Its average benchmark score of 31580 puts it just 0.1% ahead of the Intel Core i7-12700F and 0.6% ahead of the AMD Ryzen 7 8700G. This shows the CPU is a powerhouse. Conversely, the RTX 4060 sits at the 66th percentile against all GPUs, with an average benchmark score of 23181. It is nearly neck-and-neck with the Intel Arc B580, which trails by only 0.7%. The GPU is a solid mid-range performer. The combination of a top-tier CPU with a mid-range GPU means the overall rank is pulled down by the graphics card, which becomes the limiting factor in many scenarios, especially at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 4060 is the clear bottleneck in this pairing for The Technomancer. The benchmark results show a significant drop in performance as resolution increases, a classic sign of a GPU-limited workload. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. Its boost clock is 2460 MHz. These specs are adequate for 1080p and 1440p gaming, but the 8 GB frame buffer and 128-bit memory interface are stressed by the demands of 4K, particularly at higher quality presets.

The data supports this. At 1080p with Low settings, the combo pushes 168.4 FPS. At 1440p Low, it drops to 111.3 FPS, and at 4K Low, it falls to 62.1 FPS. This scaling shows that even on Low settings, the increase in pixel count from 1080p to 4K (a 4x increase) results in a 63% drop in FPS. The GPU is working progressively harder to fill those pixels. The gap between the CPU's capability and the GPU's output is evident; the Ryzen 7 7800X3D is never the limiting factor here.

Resolution Scaling

The FPS scaling across resolutions tells a clear story of a GPU-bound system. From 1080p to 1440p, the average FPS across all settings drops by roughly 34%. From 1440p to 4K, the average FPS drops by another 45%. This is a steep decline that points directly at the RTX 4060 as the primary constraint.

Look at the High preset specifically. At 1080p, you get 110.5 FPS. At 1440p, that falls to 74 FPS. At 4K, it plummets to 40.8 FPS. This is a 63% reduction in performance from 1080p to 4K. The CPU is powerful enough to handle the game's logic and draw calls at any resolution, but the GPU simply cannot maintain the same level of output as the pixel count increases. If the CPU were the bottleneck, we would expect to see similar FPS numbers at 1080p and 1440p, with a sharp drop only at 4K. Instead, we see a consistent, steep decline, confirming that the RTX 4060 is the limiting component.

FAQ

Q: Can this combo run The Technomancer at 4K?

A: Yes, but with caveats. At 4K with Low settings, it achieves an average of 62.1 FPS. However, at 4K with High settings, the average falls to 40.8 FPS, and at Ultra, it drops to 29.5 FPS. It is playable at lower presets but not at high fidelity.

Q: What is the best resolution for this setup?

A: The data indicates that 1440p is the sweet spot. At 1440p with High settings, the combo achieves 74 FPS, which is a smooth, playable experience. At 1080p, you get much higher frame rates (110.5 FPS on High), but 1440p provides a better balance of visual fidelity and performance.

Q: How does the RTX 4060 compare to its closest rivals?

A: The RTX 4060's average benchmark score is 0.7% higher than the Intel Arc B580 and 0.8% higher than the AMD Radeon 760M. It is also 0.6% lower than the AMD Radeon RX 6600M, indicating these GPUs are all in the same performance class.

Q: Is the Ryzen 7 7800X3D overkill for this game?

A: In terms of gaming performance, the Ryzen 7 7800X3D is significantly more powerful than needed to feed the RTX 4060 in The Technomancer. Its performance is 0.1% higher than the Intel Core i7-12700F, and it sits at the 87th percentile of all CPUs. The FPS data shows the GPU is the bottleneck, not the CPU.

Q: What is the difference in performance between Low and Ultra settings at 1080p?

A: At 1080p, the Low preset achieves 168.4 FPS, while the Ultra preset achieves 85 FPS. This is a 98% increase in performance when using Low settings, but it comes at the cost of significant visual quality.

Q: Does the CPU's performance vary greatly between single and multi-threaded tasks?

A: Yes. The CPU achieves a strong multi-core score of 29149 in Cinebench R23, but a much lower single-core score of 4115 in the same test. This indicates it is a well-balanced processor for both multi-threaded workloads and single-threaded tasks like gaming.

Settings Recommendations

For the best experience, the data points to a few clear choices depending on your target resolution.

At 1080p, the High preset is the recommended starting point. It delivers an average of 110.5 FPS, which is well above the threshold for smooth gameplay on a high-refresh-rate monitor. Dropping to Low increases the frame rate to 168.4 FPS, but the visual sacrifice is likely not worth it for most players. The Ultra preset, at 85 FPS, is still playable, but the performance cost from High to Ultra is significant (a 23% drop) for what is often a marginal visual improvement.

At 1440p, the High preset is the clear winner. It provides an average of 74 FPS, which is a solid, playable experience. The Medium preset offers 83.2 FPS, but High is the better choice for image quality at a small performance cost. The Ultra preset dips to 57.8 FPS, which is on the edge of smoothness for some players. We would recommend High for the best balance.

At 4K, you are fighting the GPU's limitations. The Low preset is the only option that provides a consistently playable frame rate, averaging 62.1 FPS. The Medium preset at 48 FPS and High at 40.8 FPS are workable but will feel less smooth. The Ultra preset at 29.5 FPS is not recommended for a good experience. If 4K is your target, you will need to stick to Low or Medium settings.

CPU Role

The AMD Ryzen 7 7800X3D is an 8-core, 16-thread processor based on the Zen 4 architecture. It has a base clock of 4.20 GHz and a boost clock of 5.00 GHz. Its defining feature is the large 96 MB of shared L3 cache, which is designed to reduce memory latency and improve gaming performance. In synthetic benchmarks, it scores 29149 in Cinebench R23 multi-core and 4115 in single-core, showing immense throughput.

However, in this specific game with this GPU, the CPU's role is largely to not be a bottleneck. The benchmark results show that frame rates are dictated by the GPU's workload. For example, the difference in FPS between 1080p Low (168.4 FPS) and 4K Low (62.1 FPS) is entirely due to the GPU's rendering load. The CPU is powerful enough to feed the GPU at all tested resolutions and settings. Its high percentile ranking (87th) and average benchmark score (31580) confirm it has far more headroom than the RTX 4060 can utilize in The Technomancer. The CPU is not a limiting factor, but it is also not contributing to higher frame rates beyond what the GPU can deliver; it is simply ensuring the GPU is never waiting for data.