Archeage

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 4060 delivers a playable but resolution-sensitive experience in Archeage, with the data showing a clear transition from CPU-bound behavior at lower resolutions to GPU-bound behavior at 4K. The measured frames per second across the three tested resolutions reveal a system that can comfortably handle 1080p and 1440p gaming but struggles to maintain fluid motion at 2160p, particularly at higher quality presets.

Resolution Scaling

The frame rate scaling from 1920x1080 to 3840x2160 follows a predictable pattern, but the magnitude of the drop varies dramatically depending on the selected settings preset. At Low settings, the average FPS falls from 153 at 1080p to 103 at 1440p, a reduction of 50 FPS, and then further to 59 at 4K. This represents a 61% decline from 1080p to 4K, indicating that even at the lowest graphical load, the GPU becomes a limiting factor as pixel count quadruples.

The Medium preset shows a similar trajectory but with slightly different margins. At 1080p the average is 136 FPS, which drops to 91 at 1440p and then to 52 at 4K. The jump from 1440p to 4K here costs 39 FPS, a steeper decline than the 45 FPS loss seen between 1080p and 1440p. This suggests that the RTX 4060’s 8 GB VRAM and 128-bit memory bus begin to throttle performance as the resolution increases, with the 272.0 GB/s bandwidth becoming a bottleneck.

High settings amplify the scaling penalty. The average FPS at 1080p is 92, dropping to 62 at 1440p and then to 36 at 4K. The 4K result is barely above the threshold of acceptable playability for many users, and the 56 FPS gap between 1080p and 4K represents a 61% performance loss. Ultra settings are the most punishing, with 63 FPS at 1080p falling to 42 at 1440p and collapsing to just 24 at 4K. The 4K Ultra result is effectively unplayable for smooth gameplay, and even the 1440p Ultra figure of 42 FPS is marginal.

The data indicates that the limiting component shifts with resolution. At 1080p, the Ryzen 7 7800X3D’s 8 cores and 16 threads, with a boost clock of 5.00 GHz, are sufficient to feed the GPU, as evidenced by the 153 FPS Low result. However, at 4K, the RTX 4060’s compute resources become the primary constraint, with the 4K Ultra result of 24 FPS showing that the GPU’s 15.11 TFLOPS FP32 throughput is inadequate for the pixel load. The 1440p results represent a balanced zone where both components contribute, but the system still favors the CPU’s strong single-thread performance.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 1920x1080 is the only resolution where all settings presets remain playable, with even Ultra averaging 63 FPS. At 2560x1440, only Low and Medium presets exceed 60 FPS, while 3840x2160 fails to reach 60 FPS on any preset.

Q: How does the Ultra preset compare to High at 1440p?

A: The Ultra preset at 2560x1440 averages 42 FPS, which is 20 FPS lower than the High preset’s 62 FPS at the same resolution. This represents a 32% performance penalty for the additional graphical fidelity.

Q: Is the RTX 4060 sufficient for 4K gaming in Archeage?

A: The data shows that 4K performance is limited. The best 4K result is 59 FPS on Low settings, but Medium drops to 52 FPS and High falls to 36 FPS. Ultra at 4K averages just 24 FPS, which is below the threshold for smooth gameplay.

Q: What frame rates can be expected at 1080p Medium?

A: The 1920x1080 Medium preset averages 136 FPS, with a minimum of 115 FPS and a maximum of 156 FPS. This provides a consistently smooth experience with plenty of headroom above 60 FPS.

Q: How does the CPU’s performance influence the results?

A: The Ryzen 7 7800X3D’s 3DMark single-thread score of 959 and multi-thread score of 7967 indicate strong per-core performance. This is reflected in the 1080p Low result of 153 FPS, where the CPU is able to drive high frame rates without the GPU becoming the limiting factor.

Q: What is the worst-case scenario for this combo?

A: The worst measured result is 3840x2160 Ultra with an average of 24 FPS and no recorded minimum or maximum. This is the only configuration where the system falls below 30 FPS, making it unsuitable for competitive or action-oriented gameplay.

CPU Role

The AMD Ryzen 7 7800X3D is a desktop processor from the 7000 series, built on the Zen 4 architecture with the Raphael codename. It features 8 cores and 16 threads, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. The processor has a 96 MB shared L3 cache, which is substantial for an MMORPG like Archeage that may benefit from large data sets. The CPU’s 3DMark scores show balanced performance: 959 in single-thread, 3684 in 4-thread, 6539 in 8-thread, and 7980 in 16-thread tests. This scaling from 4 to 8 threads is nearly linear, indicating good multi-threading efficiency.

In Archeage, the CPU’s role is most apparent at 1080p where the GPU is less stressed. The 153 FPS Low result at 1920x1080 demonstrates that the 7800X3D can push high frame rates when the graphical load is light. The 3DMark max-threads score of 7967 is very close to the 16-thread score of 7980, suggesting that the processor does not gain significantly from more than 16 threads, which is typical for gaming workloads. The Cinebench R23 multicore score of 16817 and single-core score of 1713 further confirm strong sustained performance.

The CPU’s 83rd percentile ranking among all CPUs, with an average benchmark score of 33079, places it in the upper tier of processors. Its nearest rivals include the AMD Ryzen 7 8700G and Intel Core i7-13650HX, both with an average score of 33089 and a 0% delta, indicating essentially identical performance. The AMD Ryzen 9 PRO 6950H is slightly behind at 33201 with a -0.4% delta. This means the 7800X3D is competitive with the best mainstream processors, though not a standout leader.

At 1440p and 4K, the CPU’s influence diminishes as the GPU becomes the bottleneck. The 1440p Medium result of 91 FPS suggests that the CPU can still maintain high frame rates, but the 4K results, which drop to 36 FPS on High, are clearly limited by the GPU. The 120 W TDP and 5 nm process node indicate efficient power delivery, which may help sustain boost clocks during extended gaming sessions.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all presets. Low settings average 153 FPS, with no minimum or maximum recorded. Medium settings average 136 FPS, with a minimum of 115 FPS and a maximum of 156 FPS, showing a tight frame time distribution. High settings average 92 FPS, while Ultra settings drop to 63 FPS. The gap between Low and Ultra at 1080p is 90 FPS, which is the largest absolute difference among the three resolutions, highlighting the significant impact of settings on frame rate when the CPU is not the limiting factor.

At 2560x1440, performance decreases but remains largely playable. Low settings average 103 FPS, which is still above 100 FPS. Medium settings average 91 FPS, with a minimum of 78 FPS and a maximum of 105 FPS. High settings drop to 62 FPS, and Ultra falls to 42 FPS. The delta between Low and Ultra at 1440p is 61 FPS, less than at 1080p, indicating that the GPU is starting to constrain performance more heavily.

At 3840x2160, the system struggles to maintain high frame rates. Low settings average 59 FPS, which is just below 60 FPS, making it the only 4K preset capable of near-smooth gameplay. Medium settings average 52 FPS, with a minimum of 45 FPS and a maximum of 60 FPS. High settings drop to 36 FPS, and Ultra falls to 24 FPS. The 4K results show a stark contrast to 1080p, with the Low preset at 4K (59 FPS) performing worse than the Ultra preset at 1080p (63 FPS). This demonstrates the significant cost of higher resolutions on the RTX 4060.

The data also reveals that the Medium preset offers the most stable frame pacing, with recorded minimum and maximum values at all three resolutions. At 1080p, the range is 115 to 156 FPS, at 1440p it is 78 to 105 FPS, and at 4K it is 45 to 60 FPS. This consistency makes Medium the most predictable preset for users who prioritize stable performance over maximum visual quality.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with the AD107 chip, manufactured on a 5 nm process by TSMC. It has 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. The GPU’s boost clock is 2460 MHz, with a base clock of 1830 MHz, and it has 3072 shading units. The RTX 4060’s 3DMark Steel Nomad DX12 score of 2302 and Passmark G3D score of 19545 indicate mid-range performance, placing it in the 61st percentile among all GPUs.

In Archeage, the GPU’s role becomes increasingly critical as resolution increases. At 1080p, the GPU is not fully utilized, as shown by the 153 FPS Low result. However, at 4K, the GPU is the primary bottleneck, with the 4K Ultra result of 24 FPS being only 16% of the 1080p Low result. The GPU’s 8 GB VRAM may also be a limiting factor at higher resolutions, as the 4K Medium result of 52 FPS suggests that memory capacity and bandwidth could be constraining performance.

The RTX 4060’s nearest rivals include the AMD Radeon HD 7790 with an average score of 17666 and a -0.2% delta, and the AMD Radeon 780M with a score of 17588 and a 0.3% delta. This places the RTX 4060 in a narrow performance band, with only a 1% difference between the best and worst rivals. The GPU’s Passmark DirectX 12 score of 76 is relatively low, which may explain its weaker performance in modern titles, but Archeage’s 2014 release date likely relies on older DirectX paths where the GPU performs better.

The GPU’s 15.11 TFLOPS FP32 throughput and 236.2 GTexel/s texture rate are modest by modern standards, but they are sufficient for 1080p and 1440p gaming in Archeage. The 4K results, particularly the 36 FPS High and 24 FPS Ultra, indicate that the GPU’s compute and memory resources are inadequate for the 3840x2160 pixel count. The 115 W TDP suggests the GPU is power-efficient, but this efficiency comes at the cost of raw performance.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance across all three resolutions. At 1080p, Medium averages 136 FPS with a minimum of 115 FPS, ensuring smooth gameplay with no drops below 60 FPS. At 1440p, Medium averages 91 FPS with a minimum of 78 FPS, which still provides a comfortable margin above 60 FPS. Even at 4K, Medium averages 52 FPS with a minimum of 45 FPS, which is playable for slower-paced MMORPG content.

The High preset is a viable alternative for users who prioritize visual fidelity over raw frame rate. At 1080p, High averages 92 FPS, which is still well above 60 FPS, but at 1440p it drops to 62 FPS, which is close to the 60 FPS threshold. At 4K, High averages 36 FPS, which is borderline playable but may suffer from noticeable stutter in crowded areas.

The Ultra preset is only recommended for users with lower refresh rate displays or for taking screenshots. At 1080p, Ultra averages 63 FPS, which is acceptable, but at 1440p it drops to 42 FPS and at 4K it falls to 24 FPS. The Low preset, while offering the highest frame rates (153 FPS at 1080p, 103 FPS at 1440p, 59 FPS at 4K), sacrifices significant visual quality and is not recommended for general play.

For the best experience, users should select Medium at 1080p or 1440p, depending on their display’s native resolution. At 4K, Medium is the only preset that maintains an average above 50 FPS, making it the default choice for 4K displays. The Medium preset’s recorded minimum and maximum values at all resolutions indicate consistent frame pacing, which is crucial for MMORPGs where frame time spikes can be distracting.

How This Combo Ranks

The combination of the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 4060 ranks 2001 out of 3708 tested combos in Archeage, placing it in the 54th percentile of all tested systems. This mid-pack ranking reflects the GPU’s mid-range performance, as the CPU is clearly capable of higher frame rates than the GPU can deliver at higher resolutions.

The CPU’s 83rd percentile ranking among all CPUs contrasts sharply with the GPU’s 61st percentile ranking, indicating a significant performance imbalance in this combo. The CPU is a top-tier processor, with an average benchmark score of 33079, while the GPU’s average score of 17639 is more modest. This imbalance means that the combo’s overall ranking is dragged down by the GPU, particularly in scenarios where the GPU is the limiting factor.

At 1080p, the combo’s ranking would likely be higher, as the CPU can push frame rates above 150 FPS on Low settings. However, at 4K, the combo’s performance falls to the bottom tier, with the 4K Ultra result of 24 FPS being among the lowest measured. The combo’s ranking of 2001 out of 3708 suggests that there are approximately 1700 combos that perform better, most of which likely feature more powerful GPUs.

The data shows that this combo is best suited for 1080p and 1440p gaming, where the CPU’s strength compensates for the GPU’s limitations. Users with 4K displays should consider this combo only if they are willing to play at Low or Medium settings, as the 4K High and Ultra results are below 40 FPS. The combo’s mid-pack ranking reflects its versatility: it is not a top-tier performer, but it is capable of delivering a smooth experience at mainstream resolutions with appropriate settings.