The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload for the AMD Ryzen 7 7700 and AMD Radeon RX 570 combination. The measured frame rates across resolutions and settings reveal a system that is heavily constrained by the graphics card, particularly at higher resolutions, while the processor’s substantial multi-threading capabilities are largely underutilized in this title. The data shows a clear hierarchy of performance where the GPU is the definitive bottleneck, and the settings menu is the primary lever for achieving playable frame rates.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent, underscoring the RX 570’s limitations with modern rendering loads. At High settings, the average frame rate falls from 47.4 FPS at 1920x1080 to 29.4 FPS at 2560x1440, and then plummets to 16.6 FPS at 3840x2160. This represents a 38% reduction from 1080p to 1440p and a further 44% reduction from 1440p to 4K. The pattern is similar across all presets, with the Ultra preset showing the most drastic scaling, dropping from 35.3 FPS at 1080p to a nearly unplayable 11 FPS at 4K.

This scaling behavior indicates that the limiting component is unambiguously the GPU. The Ryzen 7 7700, with its 8 cores and 16 threads, is not the constraining factor here; the workload at higher resolutions is dominated by pixel fill-rate and memory bandwidth, which are the RX 570’s known weaknesses. The 4 GB frame buffer and 224.0 GB/s memory bandwidth are simply insufficient for the texture and shading demands of 4K in this game. The fact that the Low preset at 4K (23.8 FPS) is still slower than the Ultra preset at 1080p (35.3 FPS) further confirms that the resolution is the primary driver of performance loss, not the graphical features toggled within a preset. The data suggests that for a smooth experience, the target resolution should be 1080p or 1440p with adjusted settings, as 4K is beyond the reach of this hardware configuration.

FAQ

Q: What is the highest average frame rate achievable with this CPU and GPU combination?

A: The highest measured average frame rate is 70 FPS, achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the Ultra preset at 1080p compare to the Low preset at 1440p?

A: The Ultra preset at 1920x1080 yields an average of 35.3 FPS, while the Low preset at 2560x1440 yields a higher average of 43.2 FPS. This indicates that reducing graphical quality is more effective for gaining performance than lowering the resolution from 1440p to 1080p.

Q: Is the AMD Ryzen 7 7700 a bottleneck for the AMD Radeon RX 570 in this game?

A: No, the benchmark results indicate the opposite. The CPU has a high average benchmark score of 40468 and is in the 91st percentile of all CPUs. The GPU’s performance limits the frame rates, as evidenced by the significant FPS drops at higher resolutions, which are a classic sign of GPU-bound rendering.

Q: Can this system run The Technomancer at 4K resolution?

A: Technically yes, but the experience is not playable. At 3840x2160, the average frame rates range from 11 FPS on Ultra to 23.8 FPS on Low. All measured 4K results fall well below the generally accepted threshold for smooth gameplay.

Q: Which settings preset provides the most significant performance boost over the baseline?

A: The Low preset provides the most significant boost. Compared to the High preset, it offers a 48% performance increase at 1080p (70 FPS vs 47.4 FPS), a 47% increase at 1440p (43.2 FPS vs 29.4 FPS), and a 43% increase at 4K (23.8 FPS vs 16.6 FPS).

Q: How does the RX 570’s performance in this game compare to its overall standing among GPUs?

A: The RX 570’s average benchmark score is 30158, placing it in the 74th percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce RTX 5060 and AMD Radeon RX 7700 XT, which have nearly identical average scores, with deltaPct values of 0.2%, indicating a very close grouping in synthetic tests, though the measured gameplay results here show the RX 570’s specific limitations.

CPU Role

The AMD Ryzen 7 7700 is a high-end desktop processor from the 7000 series, featuring 8 cores and 16 threads based on the Zen 4 architecture. Its specifications are robust, with a base clock of 3.80 GHz and a boost clock of 5.30 GHz, alongside a substantial 32 MB of shared L3 cache. In synthetic benchmarks, it performs exceptionally well, scoring 29302 in Cinebench R23 multi-core and 4136 in single-core tests. Its average benchmark score of 40468 places it in the 91st percentile of all CPUs, indicating that it is a top-tier performer for general and multi-threaded workloads.

However, in The Technomancer, the CPU’s role appears to be secondary. The measured FPS data shows a clear GPU bottleneck, as performance scales almost entirely with resolution and settings, not with CPU-intensive tasks. The game, released in 2016, is likely not optimized to fully utilize the 16 threads available. The CPU’s high single-thread performance (4136 in Cinebench R23) is sufficient to feed the GPU, but the RX 570 cannot translate that into higher frame rates. The data suggests that the Ryzen 7 7700 has ample headroom in this scenario, and the system’s overall performance is capped by the graphics card’s ability to render frames. The CPU is not the limiting factor; it is the foundation upon which the GPU is the active constraint.

Settings Recommendations

Based on the measured FPS data, the recommended settings depend entirely on the target resolution and acceptable performance level. For a smooth 60+ FPS experience, the only viable option is the Low preset at 1920x1080, which delivers an average of 70 FPS. This is the only configuration that clears the 60 FPS mark. If a player is willing to accept a lower frame rate in the 45-55 FPS range, the Medium preset at 1080p (51.8 FPS) or the Low preset at 1440p (43.2 FPS) are reasonable choices, offering a balance between visual fidelity and playability. The High preset at 1080p (47.4 FPS) is also an option, but it provides no benefit over the Medium preset at the same resolution.

For users targeting 1440p, the Low preset is the only sensible choice, as the Medium preset (35.1 FPS) and High preset (29.4 FPS) fall into a range that may feel sluggish for an action RPG. The Ultra preset is not recommended at any resolution, as it only achieves 35.3 FPS at 1080p and drops to 23.2 FPS at 1440p and 11 FPS at 4K. The data indicates that the graphical feature enhancements in the Ultra preset have a high performance cost that is not justified by the resulting frame rates on this hardware. The optimal strategy is to prioritize resolution and use the Low or Medium presets to maintain playable frame rates, as the GPU is the limiting component.

How This Combo Ranks

The combination of the AMD Ryzen 7 7700 and the AMD Radeon RX 570 ranks 1606 out of 1656 tested combinations in The Technomancer. This places it in the bottom 3% of all tested system configurations, which is a clear indication that this hardware pairing is not well-suited for this specific game at higher settings. The rank is a direct consequence of the GPU’s limitations, as the CPU is a high-performance part that would not typically be found in a system with such a low-ranking outcome.

This low rank is particularly notable given the CPU’s strong overall standing. The Ryzen 7 7700’s nearest rivals in synthetic benchmarks include the AMD Ryzen 9 7940H and Intel Core i9-13905H, with deltaPct values of 0.1% and -0.6%, respectively, indicating a tight grouping among top-tier processors. The RX 570, on the other hand, is placed in the 74th percentile of GPUs, which is a mid-range standing. The combination of a top-tier CPU with a mid-range GPU creates a significant imbalance, and the game’s performance is dictated by the weaker component. The rank of 1606 out of 1656 suggests that most other tested system configurations, even those with less powerful CPUs, likely outperform this combo because they are paired with more capable graphics cards, leading to higher measured frame rates.

Measured FPS Breakdown

The following data represents the exact average FPS measurements for the AMD Ryzen 7 7700 + AMD Radeon RX 570 combination in The Technomancer.

At 1920x1080, the performance is as follows:

• Low: 70 FPS
• Medium: 51.8 FPS
• High: 47.4 FPS
• Ultra: 35.3 FPS

At 2560x1440, the performance is as follows:

• Low: 43.2 FPS
• Medium: 35.1 FPS
• High: 29.4 FPS
• Ultra: 23.2 FPS

At 3840x2160, the performance is as follows:

• Low: 23.8 FPS
• Medium: 16.9 FPS
• High: 16.6 FPS
• Ultra: 11 FPS

The data shows a clear and consistent tiering. The Low preset consistently provides the highest frame rates at all resolutions, while the Ultra preset provides the lowest. The gap between Low and Ultra widens with increasing resolution, from a 34.7 FPS difference at 1080p to a 12.8 FPS difference at 4K. This indicates that the overhead of the Ultra preset’s features becomes relatively less impactful at higher resolutions where the GPU is already overburdened, but it does not make the preset playable. The measurements confirm that the system is viable for 1080p gaming with the Low preset, acceptable for 1080p with Medium or High presets if 60 FPS is not required, and only marginally playable at 1440p with the Low preset. All 4K measurements are below 30 FPS and are not suitable for this action-oriented game.