The Technomancer
This combination delivers exceptional performance with an average of 122 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 50 | 64 | 76 | 97 |
| 1440p QHD | 91 | 119 | 136 | 166 |
| 1080p Full HD | 138 | 164 | 176 | 192 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 7 3700X + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
The Technomancer, an Action RPG from 2016, presents an interesting case study for the AMD Ryzen 7 3700X and NVIDIA GeForce RTX 4070 Ti SUPER pairing. The measured data reveals a system that is heavily influenced by both the game's age and the hardware's modern capabilities, showing a clear hierarchy of performance across resolutions and settings.
Resolution Scaling
The data shows a classic pattern of GPU-bound scaling as resolution increases. At 1920x1080 with Low settings, the combo achieves an average of 191.8 FPS. Moving to 2560x1440 at the same settings, the average drops to 165.8 FPS, a 13.6% reduction. The most significant impact comes at 4K, where the 3840x2160 Low preset yields 96.8 FPS, representing a 49.5% drop from the 1080p figure. This dramatic scaling at 4K suggests the GPU is the primary limiting factor at higher pixel counts, while the CPU has enough headroom to feed the graphics card at lower resolutions.
The scaling pattern changes notably when comparing settings at each resolution. At 1080p, the difference between Low and Ultra is 53.4 FPS (from 191.8 to 138.4), a 27.8% performance penalty. At 1440p, the gap widens to 74.9 FPS (165.8 to 90.9), a 45.2% reduction. At 4K, the Low-to-Ultra spread becomes 47 FPS (96.8 to 49.8), which is a 48.6% drop. This increasing percentage gap at higher resolutions indicates that the GPU’s rendering workload expands more than proportionally with resolution and settings, reinforcing that the RTX 4070 Ti SUPER is the bottleneck in this equation.
The fact that 1080p Ultra still delivers 138.4 FPS suggests the Ryzen 7 3700X is not holding the system back at lower resolutions. The 8-core, 16-thread processor with a boost clock of 4.40 GHz appears sufficient for this game’s CPU demands, as the FPS scaling between resolutions remains consistent with GPU expectations. The 1440p High result of 119.1 FPS versus 1080p High at 163.9 FPS shows a 27.3% decrease, which aligns with the pixel count increase of 77.8% — indicating the GPU is scaling efficiently without CPU interference.
FAQ
Q: What is the best performance this combo can achieve in The Technomancer?
A: The highest measured average FPS is 191.8 at 1920x1080 with Low settings. For a more balanced experience, 1440p High delivers 119.1 FPS, while 4K High still maintains a playable 64.4 FPS.
Q: Does the Ryzen 7 3700X bottleneck the RTX 4070 Ti SUPER in this game?
A: The data suggests no significant bottleneck. At 1080p, the GPU still scales FPS from 138.4 (Ultra) to 191.8 (Low), showing the CPU can feed the GPU adequately. The Cinebench R23 multicore score of 19087 indicates strong multi-threaded capability, and the 32 MB L3 cache helps with game data access.
Q: How does the 4K experience compare to 1440p?
A: At 4K, the average FPS ranges from 49.8 (Ultra) to 96.8 (Low), while 1440p ranges from 90.9 (Ultra) to 165.8 (Low). The 4K Ultra result drops below 50 FPS, making it the least smooth option, whereas 1440p remains above 90 FPS across all settings.
Q: What settings provide the largest FPS increase?
A: Moving from Low to Medium at 1080p reduces FPS from 191.8 to 175.8, a 9.1% decrease. The jump from Medium to High at 4K costs 11.4 FPS (75.8 to 64.4), which is a 15% reduction, while High to Ultra at 4K costs 14.6 FPS (64.4 to 49.8), a 22.7% drop.
Q: Is this combo ranked high among tested systems?
A: Yes, this pairing ranks 365 out of 1656 tested combos for The Technomancer, placing it in the top 22% of all configurations tested.
Q: How does the CPU’s single-thread performance matter here?
A: The Ryzen 7 3700X scores 2694 in Cinebench R23 single-core and 2656 in PassMark single-thread. These scores, combined with the 4.40 GHz boost clock, support the smooth 1080p performance where the GPU is less stressed, indicating the CPU handles the game’s main-thread workload without issue.
CPU Role
The AMD Ryzen 7 3700X, built on the Zen 2 architecture with a 7 nm process, provides 8 cores and 16 threads. Its base clock of 3.60 GHz and boost clock of 4.40 GHz appear well-suited for The Technomancer, a game released before this CPU’s 2019 launch. The benchmark results show the processor performing at the 85th percentile versus all CPUs, with an average benchmark score of 28631. Its nearest rivals include the Intel Core i5-12600 with a deltaPct of -0.1%, indicating essentially identical overall performance, and the AMD Ryzen 5 5600XT at 0.1% ahead.
The CPU’s cache hierarchy — 64 KB L1 per core, 512 KB L2 per core, and 32 MB L3 — likely contributes to the consistent frame delivery seen across resolutions. The 32 MB L3 cache is particularly relevant for a game from 2016, as it can help store frequently accessed game assets. In PassMark tests, the CPU scores 66399 in integer math and 39005 in floating-point math, showing strong arithmetic capability that supports game logic and physics calculations.
The 1080p results are where the CPU role is most visible. At Low settings, the GPU has less work, and the 191.8 FPS average suggests the CPU can maintain high frame submission rates. If the CPU were a bottleneck, we would expect to see similar FPS numbers across different resolutions at the same settings. Instead, the data shows clear resolution-based scaling, confirming the CPU is not the limiting component. The 1923 Cinebench R15 multicore score and 271 single-core score provide additional context, though the R23 scores (19087 multicore, 2694 single-core) are more representative of modern workload demands.
How This Combo Ranks
This specific combination of AMD Ryzen 7 3700X and NVIDIA GeForce RTX 4070 Ti SUPER holds rank 365 out of 1656 total tested combos for The Technomancer. This places the system in the top 22% of all configurations, indicating strong overall performance. The ranking reflects the balance between the CPU and GPU, where the RTX 4070 Ti SUPER (86th percentile among all GPUs) and the Ryzen 7 3700X (85th percentile among all CPUs) are closely matched in their respective performance tiers.
The combo’s rank suggests that while it is not among the absolute top performers, it delivers a high-quality experience. The GPU’s 3DMark Steel Nomad DX12 score of 5569 and PassMark G3D score of 31811 demonstrate substantial graphics horsepower. The CPU’s PassMark multithread score of 22458 and data compression score of 296379 indicate robust general processing capability. The deltaPct values for the GPU’s nearest rivals show the RTX 4070 Ti SUPER is 0.7% behind the NVIDIA CMP 50HX and 2% ahead of the NVIDIA RTX A1000 Mobile, confirming it sits in a competitive performance band.
Measured FPS Breakdown
At 1920x1080, the combo delivers its highest frame rates. Low settings produce 191.8 FPS, Medium yields 175.8 FPS, High achieves 163.9 FPS, and Ultra maintains 138.4 FPS. The spread from Low to Ultra is 53.4 FPS, with each settings tier costing roughly 12-15 FPS on average.
At 2560x1440, the performance remains strong but drops noticeably. Low settings average 165.8 FPS, Medium reaches 136.2 FPS, High hits 119.1 FPS, and Ultra falls to 90.9 FPS. The gap between Low and Ultra expands to 74.9 FPS, showing the GPU workload increasing with resolution.
At 3840x2160, the results show the most significant impact. Low settings still manage 96.8 FPS, Medium achieves 75.8 FPS, High drops to 64.4 FPS, and Ultra barely stays above 49 FPS at 49.8 FPS. The Low-to-Ultra difference is 47 FPS, but the percentage drop is the largest of any resolution at 48.6%. The 4K Ultra result falls below the 60 FPS threshold, which may be noticeable in fast-paced action sequences.
Settings Recommendations
For the best experience, the 1440p High preset at 119.1 FPS offers an excellent balance between visual quality and smoothness. This setting provides a significant visual upgrade over Medium (136.2 FPS) while maintaining nearly double the refresh rate of most standard 60 Hz displays. Players prioritizing maximum fidelity should consider 1440p Ultra at 90.9 FPS, which remains comfortably above 60 FPS.
At 1080p, the High preset at 163.9 FPS is the most practical choice, as the visual difference between High and Ultra (138.4 FPS) may not justify the 15.6% performance hit. For competitive or high-refresh-rate play, 1080p Medium at 175.8 FPS offers a good compromise, while Low at 191.8 FPS maximizes frame rate for 144 Hz or 165 Hz displays.
For 4K users, the High preset at 64.4 FPS is the recommended starting point. Dropping to Medium (75.8 FPS) provides a 17.7% FPS boost and may be preferable for maintaining smoother motion, while Ultra at 49.8 FPS should be avoided unless visual fidelity is the absolute priority and frame rate dips are acceptable.
GPU Role
The NVIDIA GeForce RTX 4070 Ti SUPER is the dominant component in this pairing, with its 16 GB of GDDR6X memory and 672.3 GB/s bandwidth proving more than sufficient for The Technomancer. The GPU’s base clock of 2340 MHz and boost clock of 2610 MHz, combined with 8448 shading units, deliver the raw compute power needed for high-resolution rendering. The 44.10 TFLOPS FP32 performance and 689.0 GTexel/s texture rate explain the strong FPS numbers at 1080p and 1440p.
The GPU’s memory configuration is particularly noteworthy. The 16 GB VRAM capacity far exceeds what a 2016 game would require, meaning there is no risk of memory capacity bottlenecks. The 256-bit memory bus and 672.3 GB/s bandwidth ensure that texture streaming and data transfer are not limiting factors. This is reflected in the consistent scaling across settings — the GPU is clearly compute-bound rather than memory-bound.
The GPU’s benchmark scores support its strong in-game performance. The PassMark G3D score of 31811 and Geekbench OpenCL score of 223091 show substantial compute capability. The 3DMark Steel Nomad DX12 score of 5569 indicates strong DirectX 12 performance, which is relevant even though The Technomancer predates widespread DX12 adoption. The GPU’s 86th percentile ranking among all GPUs, with an average benchmark score of 48704, places it in the upper tier of graphics cards. Its nearest rival, the NVIDIA CMP 50HX, is only 0.7% ahead, while the Intel Arc A550M trails by 2.1%, confirming the RTX 4070 Ti SUPER’s position in the performance hierarchy. The 285 W TDP and triple-slot design reflect the power required to sustain these clock speeds and frame rates, particularly at 4K where the GPU is clearly the limiting component.
Hardware Specifications
AMD Ryzen 7 3700X
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 3700X + NVIDIA GeForce RTX 4070 Ti SUPER in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 96.8 |
| 3840x2160 | Medium | 75.8 |
| 3840x2160 | High | 64.4 |
| 3840x2160 | Ultra | 49.8 |
| 2560x1440 | Low | 165.8 |
| 2560x1440 | Medium | 136.2 |
| 2560x1440 | High | 119.1 |
| 2560x1440 | Ultra | 90.9 |
| 1920x1080 | Low | 191.8 |
| 1920x1080 | Medium | 175.8 |
| 1920x1080 | High | 163.9 |
| 1920x1080 | Ultra | 138.4 |
The Technomancer with Ryzen 7 3700X + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with RTX 4070 Ti SUPER + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 7 3700X + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.