The Technomancer

The Technomancer presents a demanding workload for the AMD Ryzen 7 3700X and AMD Radeon RX 580 combination, with benchmark results showing a clear performance hierarchy that is heavily constrained by the graphics card. The measured frames per second (FPS) across all resolutions and settings indicate that this is a pairing capable of delivering playable frame rates only at its most optimized settings, with the 4K resolution proving to be an insurmountable challenge. The data shows a system that is best suited for 1080p gaming, where it can achieve a smooth experience, but it falls short of the high refresh rate and high-resolution demands of modern titles.

Resolution Scaling

The performance drop from 1080p to 4K is severe, underscoring the GPU-bound nature of this game for this hardware combination. At 1080p with Ultra settings, the system produces an average of 40.6 FPS. Moving to 1440p at the same Ultra preset, the average falls to 24.6 FPS, a reduction of 16 FPS. At 4K Ultra, the average plummets to just 14 FPS, which is a 65.5% decrease from the already low 1080p Ultra score. This steep decline indicates that the Radeon RX 580's rendering capabilities are the primary limiting factor as resolution increases.

The scaling pattern is consistent across all quality presets. For instance, at High settings, the average FPS drops from 52.1 at 1080p to 33.4 at 1440p and finally to 19.7 at 4K. Similarly, at Low settings, the frame rate goes from 74.1 at 1080p to 50.3 at 1440p and then to 26.8 at 4K. The data shows that the gap between 1080p and 1440p performance is roughly 35-40% in favor of the lower resolution, while the jump to 4K exacts an even more punishing toll, nearly halving the frame rate again in most cases. This pattern confirms that the GPU's pixel throughput and memory bandwidth are being saturated, while the CPU's role in frame generation becomes less relevant at higher resolutions.

Settings Recommendations

For the best playable experience, the benchmark data points to the Low preset at 1080p as the clear winner. With an average of 74.1 FPS, this setting provides a smooth and responsive frame rate that is ideal for action-oriented gameplay. The Medium preset at 1080p also offers a viable alternative, with an average of 60.8 FPS, which is still above the standard 60 FPS target for many displays. Choosing between these two comes down to a preference for visual fidelity versus a higher frame rate buffer; the data shows a 13.3 FPS penalty for the visual upgrade from Low to Medium.

At 1440p, the picture is less favorable. The Low preset achieves an average of 50.3 FPS, which is playable but not ideal for fast-paced combat. The High and Medium presets at this resolution produce 33.4 and 35.3 FPS respectively, which will result in noticeable stutter and a less fluid experience. The Ultra preset at 1440p is not recommended, as its 24.6 FPS average is firmly in slideshow territory. At 4K, none of the settings deliver a playable experience; even the Low preset struggles at 26.8 FPS, making this resolution unsuitable for this hardware configuration.

CPU Role

The AMD Ryzen 7 3700X, with its 8 cores and 16 threads, provides ample processing power for this title. Its Zen 2 architecture, codenamed Matisse, features a base clock of 3.60 GHz and a boost clock of 4.40 GHz. In synthetic benchmarks, the processor scores 19,087 points in Cinebench R23 multi-core and 2,694 points in single-core, demonstrating strong multi-threaded and respectable single-threaded performance. The data indicates that the CPU is not the bottleneck in this game, as the FPS scaling with resolution is consistent with a GPU-limited scenario.

The CPU's performance relative to its peers is solid, ranking in the 85th percentile of all CPUs tested. Its average benchmark score of 28,631 is nearly identical to that of the Intel Core i5-12600, which scores 28,654, a negligible 0.1% difference. This suggests that for a game like The Technomancer, which relies on the GPU for the bulk of its rendering workload, the 3700X's multi-threading capabilities are more than sufficient. The game's performance is ultimately dictated by the graphics card, and the CPU's role is to feed frames without becoming a limiting factor, a job the 3700X handles with ease.

How This Combo Ranks

This specific combination of the Ryzen 7 3700X and Radeon RX 580 ranks 1532nd out of 1656 tested combos for The Technomancer. This places it in the bottom 8% of all tested systems, indicating that it is a lower-performing configuration for this particular game. This ranking is a direct result of the GPU's mid-range standing; the RX 580 sits in the 53rd percentile of all GPUs, with an average benchmark score of 13,559. Its nearest rival, the NVIDIA GeForce GTX 570, scores 13,564, a 0% difference, highlighting that the RX 580's performance is near the bottom of the current GPU hierarchy.

The low combo rank is a reflection of the GPU's inability to handle the game's demands at higher settings and resolutions. While the CPU is a strong performer, it cannot compensate for the graphics card's limitations. The benchmark results show a clear ceiling for this combo, with playable frame rates only achievable at lower resolutions and quality settings. This pairing is not competitive with higher-tier configurations, and its rank in the database reflects that reality.

FAQ

Q: What is the highest average FPS this combo can achieve?

A: The highest average FPS recorded is 74.1, which is achieved at 1920x1080 resolution with Low settings.

Q: Can this system run The Technomancer at 4K resolution?

A: No, the data shows that 4K performance is not playable. The best 4K result is 26.8 FPS at Low settings, while the Ultra preset drops to just 14 FPS.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1080p, the Low preset averages 74.1 FPS, while the Ultra preset averages 40.6 FPS. This represents a 33.5 FPS performance cost for enabling the highest quality settings.

Q: How many cores does the AMD Ryzen 7 3700X have?

A: The AMD Ryzen 7 3700X has 8 cores and 16 threads.

Q: What is the average FPS for the Medium preset at 1440p?

A: The Medium preset at 2560x1440 resolution yields an average of 35.3 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data indicates the GPU is the primary bottleneck. The consistent and steep FPS drops as resolution increases point to the graphics card being fully saturated, while the CPU's strong benchmark scores suggest it has headroom to spare.

Measured FPS Breakdown

The following table details the exact average FPS measurements for all tested resolution and settings combinations.

| Resolution | Settings | Avg FPS |

| :--- | :--- | :--- |

| 3840x2160 | High | 19.7 |

| 3840x2160 | Low | 26.8 |

| 3840x2160 | Medium | 23.4 |

| 3840x2160 | Ultra | 14 |

| 2560x1440 | High | 33.4 |

| 2560x1440 | Low | 50.3 |

| 2560x1440 | Medium | 35.3 |

| 2560x1440 | Ultra | 24.6 |

| 1920x1080 | High | 52.1 |

| 1920x1080 | Low | 74.1 |

| 1920x1080 | Medium | 60.8 |

| 1920x1080 | Ultra | 40.6 |

GPU Role

The AMD Radeon RX 580 is the primary determinant of this combo's gaming performance. Built on the 14 nm Polaris 20 chip with GCN 4.0 architecture, it operates at a base clock of 1257 MHz and a boost clock of 1340 MHz. It is equipped with 8 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 256.0 GB/s. These specifications translate to a pixel rate of 42.88 GPixel/s and a texture rate of 193.0 GTexel/s, but its raw compute power is only 6.175 TFLOPS.

The GPU's benchmark scores reflect its mid-range positioning. Its average benchmark score is 13,559, placing it in the 53rd percentile of all GPUs. Its performance is virtually identical to the NVIDIA GeForce GTX 570, which has an average score of 13,564. This level of performance is insufficient for demanding titles at high resolutions. The measured FPS data confirms this, showing that the RX 580 can only provide smooth gameplay at 1080p with lower quality settings. The severe FPS drops at 1440p and 4K are a direct result of the GPU's limited fillrate and memory bandwidth, making it the clear bottleneck in this system.