The Technomancer

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 Ti combination ranks 978th out of 2,825 tested combos for The Technomancer. This places the pairing in the 65th percentile of all configurations, meaning roughly one-third of tested systems deliver higher frame rates in this title. The rank reflects a balanced pairing where neither component dramatically bottlenecks the other, though the data suggests the GPU carries more of the performance load at higher resolutions. For a game released in 2016, this modern mid-range pairing lands in the upper-middle tier of the database, indicating it can handle the title comfortably without being among the top performers.

How This Combo Ranks

The comboRankInGame value of 978 out of 2,825 places this system firmly in the upper third of all tested combinations for The Technomancer. This is a respectable position, considering the game's age and the wide variety of hardware in the database. The ranking implies that approximately 65% of tested combos perform worse, while 35% perform better. The RTX 3070 Ti's percentileVsAllGpus score of 75 and the Ryzen 5 7400F's percentileVsAllCpus score of 83 both sit above the combo's overall rank, suggesting that the game's engine does not fully utilize either component's potential. The gap between CPU percentile (83) and GPU percentile (75) indicates the processor is relatively stronger in synthetic benchmarks, but the game's demands shift the balance toward the graphics card.

When examining the CPU's nearest rivals, the Ryzen 5 7400F scores 32,750 on average, nearly identical to the Intel Core i5-14600T (32,707, deltaPct 0.1) and the Intel Core Ultra 7 155H (32,697, deltaPct 0.2). This means the CPU is essentially tied with those alternatives in general compute, yet the combo's rank in this specific game could differ if paired with those chips. The GPU's nearest rivals tell a similar story: the RTX 3070 Ti averages 29,945, with the RTX 5070 Mobile at 29,928 (deltaPct 0.1) and the RX 6800 at 30,095 (deltaPct -0.5). These small deltas suggest the GPU is interchangeable with several competitors in raw performance, but The Technomancer's specific rendering paths may favor one architecture over another.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with a GA104 chip fabricated on Samsung's 8 nm process. It packs 6,144 shading units, 192 texture mapping units, and 96 raster output units, along with 48 ray tracing cores and 192 tensor cores. The GPU operates at a base clock of 1575 MHz and a boost clock of 1770 MHz, which are the figures that determine its raw throughput. The memory subsystem consists of 8 GB of GDDR6X on a 256-bit bus, yielding a bandwidth of 608.3 GB/s. This bandwidth is critical for The Technomancer, which features dense environments and texture streaming that can saturate memory at high resolutions.

The GPU's FP32 performance is rated at 21.75 TFLOPS, and its pixel rate is 169.9 GPixel/s with a texture rate of 339.8 GTexel/s. In The Technomancer, these numbers translate to the card's ability to fill pixels and sample textures during combat-heavy scenes. The 8 GB VRAM is the most limiting factor at 4K resolution, where the measured FPS drops significantly compared to lower resolutions. The card's production status is end-of-life, but it remains competitive in this older title. The RTX 3070 Ti's benchmark scores include a Passmark G3D score of 23,356 and a Geekbench Vulkan score of 139,541, which are strong indicators of DirectX 12 performance that The Technomancer can leverage.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset at 2560x1440 is the standout choice. At this setting, the combo averages 101 FPS with a minimum of 86 FPS and a maximum of 116 FPS, providing smooth gameplay with headroom above typical 60 FPS displays. The minimum of 86 FPS ensures that even during intense action sequences, the frame rate rarely dips below the refresh rate of most monitors. At 1920x1080, the Medium preset delivers 154 FPS average with a minimum of 131 FPS, which is excessive for most displays but offers maximum smoothness. For 4K users, the Low preset at 72 FPS average is the only way to achieve playable frame rates, though this sacrifices visual fidelity.

If visual quality takes priority over raw frame rate, the High preset at 2560x1440 delivers 86 FPS average, which is still above the 60 FPS threshold for most players. The Ultra preset at 1080p produces 103 FPS average, but the jump from High to Ultra yields diminishing returns in this title. The data shows that Medium is the sweet spot because it offers a significant improvement over Low while maintaining frame rates well above playable thresholds. At 4K, the Ultra preset drops to 37 FPS average, which is borderline unplayable for action RPG combat, making Medium (55 FPS) or Low (72 FPS) the only viable options at that resolution.

Measured FPS Breakdown

At 1080p, the combo demonstrates its strongest performance. The Low preset achieves 201 FPS average, which is the highest measured value in the entire dataset. Stepping up to Medium yields 154 FPS average with a minimum of 131 FPS and a maximum of 178 FPS. The High preset delivers 132 FPS average, and Ultra produces 103 FPS average. The progression from Low to Ultra shows a consistent decrease of roughly 25% per tier, indicating that the GPU has ample headroom at this resolution and the CPU is not a limiting factor.

Moving to 1440p, the frame rates remain strong but show more pronounced scaling. The Low preset averages 131 FPS, which is a 35% drop from 1080p Low. Medium drops to 101 FPS average with a minimum of 86 FPS and a maximum of 116 FPS. High averages 86 FPS, and Ultra falls to 67 FPS. The gap between Low and Ultra at 1440p is 64 FPS, compared to 98 FPS at 1080p, suggesting the GPU is becoming more of a bottleneck as resolution increases.

At 4K, the performance takes a significant hit. The Low preset averages 72 FPS, which is the only setting that maintains playability at this resolution. Medium drops to 55 FPS average with a minimum of 47 FPS and a maximum of 64 FPS. High averages 47 FPS, and Ultra falls to 37 FPS. The scaling from 1080p Low (201 FPS) to 4K Low (72 FPS) represents a 64% reduction, highlighting the GPU's struggle with the increased pixel count. The 8 GB VRAM likely contributes to this drop, as the game's textures at 4K may exceed the available memory.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: The data shows 2560x1440 at Medium settings provides the best balance, with an average of 101 FPS and a minimum of 86 FPS. This resolution offers a significant visual upgrade over 1080p while maintaining frame rates well above the 60 FPS threshold.

Q: Can this combo handle 4K gaming in The Technomancer?

A: Yes, but only at lower settings. The Low preset at 4K averages 72 FPS, while Medium drops to 55 FPS. Ultra settings at 4K are not recommended, as the average falls to 37 FPS, which is below playable levels for an action RPG.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 7400F scores 32,750 on average, which is within 0.3% of the Intel Core Ultra 7 155H (32,697) and the AMD Ryzen AI 7 PRO 360 (32,662). It is effectively tied with these processors in synthetic benchmarks.

Q: What is the GPU's performance relative to similar cards?

A: The RTX 3070 Ti averages 29,945, which is 0.5% behind the AMD Radeon RX 6800 (30,095) and 0.5% ahead of the RTX 2080 Ti (29,783). This places it in the same performance tier as those alternatives.

Q: Is the Ultra preset worth using at 1080p?

A: At 1080p Ultra, the combo averages 103 FPS, compared to 132 FPS at High. The 29 FPS difference may not justify the visual improvements, especially since Medium offers 154 FPS average with only minor visual downgrades.

Q: Why does performance drop so much at 4K?

A: The drop from 1080p Low (201 FPS) to 4K Low (72 FPS) represents a 64% reduction. This is due to the GPU's 8 GB VRAM and the increased pixel count, which forces the card to work harder at memory bandwidth limits.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture (codenamed Raphael). It operates at a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65 W TDP. The CPU features 64 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. It supports DDR5 memory on a dual-channel bus, providing a theoretical bandwidth of 83.2 GB/s. This memory bandwidth is sufficient for The Technomancer, which does not require extreme memory throughput.

In synthetic benchmarks, the Ryzen 5 7400F scores 21,765 in Cinebench R23 multi-core and 3,072 in single-core. The Passmark multithread score is 25,645, and the single-thread score is 3,689. These results place the CPU at the 83rd percentile among all processors, indicating strong performance for a mid-range chip. In The Technomancer, the CPU's role is to feed the GPU with draw calls and physics calculations. The game's 2016 release date means it does not utilize many cores efficiently, but the Ryzen 5 7400F's high single-thread performance ensures it can handle the game's main thread without bottlenecking the RTX 3070 Ti at 1080p.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound scaling as resolution increases. At 1080p Low, the combo achieves 201 FPS, which drops to 131 FPS at 1440p Low (a 35% reduction) and 72 FPS at 4K Low (a 64% reduction from 1080p). This scaling indicates that the GPU is the primary limiting component at higher resolutions. The CPU's strong single-thread performance allows it to keep up with the GPU at 1080p, but as resolution increases, the GPU's raw pixel-pushing capability becomes the bottleneck.

The Medium preset shows similar scaling: 154 FPS at 1080p, 101 FPS at 1440p (a 34% drop), and 55 FPS at 4K (a 64% drop from 1080p). The High preset follows the same trend: 132 FPS at 1080p, 86 FPS at 1440p (a 35% drop), and 47 FPS at 4K (a 64% drop). The consistent percentage drops across settings suggest that the scaling is resolution-driven rather than settings-driven. The Ultra preset shows the most severe scaling: 103 FPS at 1080p, 67 FPS at 1440p (a 35% drop), and 37 FPS at 4K (a 64% drop). This uniformity indicates that the RTX 3070 Ti's 8 GB VRAM and 608.3 GB/s bandwidth are the limiting factors at 4K, regardless of the settings chosen. The CPU's influence diminishes as resolution increases, confirming that this combo is GPU-bound in The Technomancer at resolutions above 1080p.